Added change to address below 2 issues.
[1] buffer_counter is not getting incremented for batching usecase,
it always runs with max clk and bus votes. So moved buffer_counter
increment logic to msm_vidc_queue_buffer, so that it will be used
for all usecases.
[2] iris2 clock calculations were using core->capabilities but all
needed infos were present in inst->capabilities. So junk values from
core->capabilities was used in clock calculations and values always
shooting to highest corner.
Change-Id: I0927899244b5de2bd46d238100fdaecd78c6fe28
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- enable conditional compilation based on defconfig
- compile only needed files based target & vpu variant
- enabled stubs to avoid compilation issues, for all
target variant and vpu types
- add support for qcv(same lunch combo) for different
PT & VT chipsets.
Change-Id: Ic446349fd1532885d7a2e94895d807c62f1ab6e4
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Handled below items as part of this change.
- print buffer_name instead of hex value.
- enable dcvs only for realtime sessions.
- enhanced max_input_data_size handling at
msm_vidc_scale_power.
Change-Id: If5ac810f4e020bee54364161596c5547af94161a
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Following changes are added with this:
1. Handle and adjust session priority.
2. Session addmission based on priority.
3. Power (clock and bus) scaling based on priority.
4. Handle s_parm influence on priority.
Change-Id: I12dec5fb03d733f07b0b0a24b4d74d1ccd4bf791
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Remove separate fault_work_handler and print all needed
debug info as part of smmu_fault_handler callback itself,
to avoid race between fault handler invocation and core
deinit sequence.
Change-Id: Ib47e3d457a5a3e33497c71d5920382cb43baed79
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Initialize subscribe parameters before input port settings
change event from firmware to avoid uninitialized subscribe
params usage in video driver.
Change-Id: I39a1e6646a845836a406193ace7a5fb71edee192
Depends-On: I07c7c8b4faaccc896249b2da84148ec05c2047da
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
As per HFI_PROP_CODED_FRAMES details, 0x0 is field interlace,
0x1 is progressive and 0x2 is adaptive frame field bitstream.
Treat 0x1 as progressive and both 0x0 and 0x2 as interlace in
driver.
Change-Id: I07c7c8b4faaccc896249b2da84148ec05c2047da
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Instead of formulating session_id, codec_type, domain at
each log print, used pre-formatted char array to print
the vidc logs.
Change-Id: If7a93ecb25a7b1b98ebca6f39e3990079c00b5dd
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
- introduce STRIDE_BYTES and STRIDE_PIX to
calculate size is bytes and pxls respectively.
- DEPRECATE VENUS_BUFFER_SIZE and introduce
VIDEO_RAW_BUFFER_SIZE. All buffer sizes are
calculated by using STRIDE_BYTES.
- For s_fmt, use STRIDE_PIX to calculate size.
- For v4l2 bytesperline, use STRIDE_IN_BYTES to
calculates size in bytes
Change-Id: I3db4d843d1834b25c6160ebc318572ac67e22806
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
modify internal buffer counts for vp9. fix comv and
noncomv buffer count to 0 for vp9 as they are not
supported for this codec.
Change-Id: I5d504128ab587c425d4cd4cfd2059241e8d256aa
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
To simplify the boot process, firmware needs to know the type of architecture
before it boots up.
Change-Id: I42ff87094b816f9783d18fa67126e9b7a4dab320
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Video domain information is required to make correct
BW vote calculations.
Change-Id: I36cf1d157ba50f43a64e736f7d3e86d15d195244
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
fixes for nv12 format and dpb buffers. modified
PIX_FMTS and corresponding driver color format
structure, therby fixing enum_fmts.
Change-Id: I955b76dd4938e96fe259311e107a0cdca39425bc
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
print error message from FW during system error
Change-Id: Id27469d786b647d2b61e8090fa1f4337b8bc79f6
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Iris2 specific calculations for Work Mode and Route.
Also add quality mode support.
Change-Id: I7a1e2fa27236aa749978d146d85fd0af6177084c
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Add below support
- kill session in case of errors
- core deinit in case of timeout errors
- flush buffers in streamoff
- decide supported colorformats based on
bitdepth and interlace info
- print level based logs
Change-Id: I45b9b0eae4220a818de23308da8802a9e12ae255
Signed-off-by: Maheshwar Ajja <majja@quicinc.com>
Add support for S_PARM and G_PARM to enable client to
set and get frame rate and operating rate to driver. Also
includes some inst database grooming changes.
Change-Id: I5b39537662faa56effa0ac63acdfc100d83bf403
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
- update basic functionality controls with their parents
and children list.
- deprecate MPEG2 related code.
- rename driver internal color formats.
Change-Id: I918d6fd238486098f10c5b9ce40c895bcd9468e5
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Add video encoder internal buffer sizes to be used by
video hardware to process input data and produce output.
Change-Id: Icf58c748d5be2f81c7de69e914c526821a7effaf
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Add support to encoder start and stop streaming sequence.
Change-Id: Ie4f124af212ed030178d0e2fe5af3d6f9f639aa0
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
