Once the FW sends the link switch request to host handle
the request from scheduler thread and send confirmation
back on completion of link switch process with status of
link switch (success/failure).
Add new serialization command type for link switch.
Introduce flags to get the current state of link switch
request, set the state to idle when no link switch in
progress or once the current link switch is completed.
Access to state is protected with MLO dev context lock.
Implement various helper API to:
a) Transition link switch to next state.
b) Get current state of link switch.
c) To check whether any link switch is in progress.
c) To check whether link switch is happening
on assoc VDEV or not.
Introduce a new VDEV flag to suggest the VDEV is in
link switch process and also implement helper APIs to
set/get/clear this VDEV flag.
a) The flag is set at start of link switch, once
the FW request params are validated and before
proceeding for link switch disconnect on VDEV.
b) Clear the flag once the Link switch confirmation
is sent to FW.
Validate the link switch request params:
a) IEEE link ID's received.
b) Check if new connection is part of MLO connection.
c) Check if VDEV is MLO STA VDEV or not.
d) Is VDEV in connected state or not, that means
VDEV is not in transitioning state due to disconnect.
e) Check if any link switch in progress on this MLD
f) Current link ID of VDEV equals the FW params.
If validation is successful, serialize the link switch
command and in the serialization activation start the
actual link switch process.
Change-Id: Ie582650541054c8cf39aaa8316e86a7a40256a15
CRs-Fixed: 3556422
Add WMI command support to force power save on all the
active MLO links for a defined number of beacon periods.
Force power save allows the firmware to suspend STA links
for X beacon periods and remain asleep even if the AP
advertises TIM as opposed to regular power save mode where
STA links wake up if the AP indicates that it has buffered
data to send.
Change-Id: I381a107f3f5f479b0eee4f526a49d6fc886aced0
CRs-Fixed: 3509543
Add code changes to handle new wmi_mlo_link_disable_event
Extract the wmi event params and store in host defined
structure.
Change-Id: I6893bfa4da7b27f4a9b1ce2936057bb3576a317c
CRs-Fixed: 3458680
New TLVs for MLO link state information is introduced for
get link info command. Add WMI changes to add these TLV in
get link info command
Change-Id: Ib8d12a727ac6f59257dcce69174271330a065c77
CRs-Fixed: 3431076
1. Make changes to selectively send the Link control WMI to the
FW with out including the T2LM TLV.
2. Modify the TLV definitions for Link preference to use the newer
Link control TLV.
Change-Id: Id8beae8376ee5d2fb3434367530a0a6bb976597d
CRs-Fixed: 3422692
This change is to allow other modules to register for
link disablement.
It includes below functions:
1- Notify link update
2- Register to handler to get link update notification
3- Unregister T2LM handlers
Added the below changes as well,
- Move T2LM related data structures to wlan_mlo_t2lm.h file
- Host receives the expected duration from FW for multiple vdevs.
Hence, add support to extract the expected duration for multiple vdevs.
Change-Id: Ie8e77d5d3b4351a8551ecd7da50786b58dad3b2e
CRs-Fixed: 3346432
To assist the Host in ML reconfiguration element construction for probe
responses, FW sends MLO link removal information as part of the MGMT Rx
event containing the corresponding probe request. This information is an
array of TLVs, one TLV for each link that is undergoing link removal from
the MLD for which this probe request is intended. The TLV carries the link
removal TBTT countdown value maintained by the FW for that link.
Add support to extract the same.
CRs-Fixed: 3335361
Change-Id: I16c6791a443ddb166da596d404a52ff2a38da291
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host with the
progress of the link delete operation. Add support to extract the TBTT
update TLV sent in this event.
Change-Id: I01ce710d282f16e7a7cf4fb767279661558d129f
CRs-Fixed: 3322714
WMI_MLO_LINK_REMOVAL_EVENTID will be sent by FW to update the Host with the
progress of the link delete operation. Add support to extract the fixed
params TLV sent in this event.
Change-Id: Ic42a822339363b1347ae174926a4dac19eef3f99
CRs-Fixed: 3318005
WMI_MLO_LINK_REMOVAL_CMDID is to be sent by the Host to initiate the
removal procedure for a given link from its MLD. This command will be sent
on the impacted link only. Add support to populate and send this command.
Change-Id: I8485d8c8897bb2bb891d50546d5fbfac2a69a4ce
CRs-Fixed: 3314430
Add API to parse the TID-to-link mapping event ID for the AP vaps.
As part of this event,
- Update the mapping switch time TSF value in host data structures.
- When mapping switch time or expected duration expires in the FW,
update the host data structure.
Change-Id: I93232429fe5c2aa12dc4bf9f6a2f014761b7df15
CRs-Fixed: 3350697
Add support for vdev level WMI Command and event to send
and receive t2lm ie info
CRs-Fixed: 3339695
Change-Id: I8b896a961cba8f1d8e11111f900a98da090b9513
Add changes to indicate ongoing critical update CU flags and
BPCC values in probe and assoc/reassoc response.
For beacon FW update the CU flags and BPCC values in impacted
and partner links and keeps the latest copy of BPCC for ML VDEV.
The similar CU indication needs to be considered for probe,
assoc/reassoc response.
FW indicate to host the ongoing CU flag within DTIM interval for
impacted, and latest BPCC values of AP MLDs in impacted
and partner link VDEVs as part of mgmt_rx_event.
Extract cu_vdev_bitmap and bpcc values CU information from
wmi_prb_tmpl_ml_info TLV for probe and assoc / reassoc request.
Pass these values to umac, mgmt and ol layer as part of rx status.
Refer these values to update CU flag in capability information,
and BPCC values to update BSS Parameter Change Count in RNR,
MLIE and per sta profile.
CRs-Fixed: 3301916
Change-Id: I92ededb6598f85f3ea21b9d5e69d182c6180e30d
Add WMI changes to send TID-to-link mapping to FW as part of peer assoc
command and as part of WMI_PEER_TID_TO_LINK_MAP_CMDID.
Change-Id: Ia3a8fb10d49e1d54d6f4f418be3f684bc0147c5c
CRs-Fixed: 3183734
WMI includes are not part of include path in some WIN projects,
move MLO related common definitions to wlan_mlo_mgr_public_structs.h.
Change-Id: If63c82bc15a2a0e0a045be896b74ea9addb3a64d
CRs-Fixed: 3083776
