Handle announce timeout value that is received as a part of
the TWT setup command and provides it to the firmware through
the WMI_TWT_ADD_DIALOG_CMDID. If timeout value is non-zero
then firmware waits up to timeout value to use data frame as
announcement frame. If timeout value is 0 then firmware sends
explicit QoS NULL frame as announcement frame on SP start.
Change-Id: I682d1dc4e304042e4e9b8d6c6a73dc13fbbdccab
CRs-Fixed: 3053956
Handle QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME_TSF attribute
in TWT setup command to provide absolute TSF value to firmware.
This helps application to start TWT session on specific TSF value.
Change-Id: Ic25b45e88599a024e6c4e6bb265ea90122405d05
CRs-Fixed: 3029020
Send responder pm mode info in twt setup event and twt
get session parameter response.
Change-Id: I1f58e0bed62f152d84cec20ff7924d05e126347f
CRs-Fixed: 3029014
Add new TWT teardown status code to indicate host teared
down the TWT session due to PS disable.
Change-Id: I49c2d7bb1abc4ceb4f79b833cbafcb44e8b936fe
CRs-Fixed: 3013358
In case if TWT command (i.e setup, terminate, pause, resume,
nudge) comes from userspace and if the firmware is in below mode
1. scan in progress
2. roam in progress
3. CSA is in progress or
4. Any other error
then the command needs to be rejected in userspace context.
Synchronize the TWT command so that whenever command goes from
driver to firmware, then driver will receive ack event first
followed by respective event (i.e add dialog, delete dialog,
pause, resume, nudge) with below condition
1. If driver receives the ack event as successful then driver
waits for this ack event, respective event with status of the
TWT action frame over the air is expected.
2. If driver receives the ack event as failure then it will
rejects the TWT command in userspace context.
Change-Id: Ie885d98ecf2dad98d34676d889fd70e4c84f0a05
CRs-Fixed: 2987904
Add TWT service bit capability support to check whether firmware
supports ack event or not. If firmware doesn't support ack event
then service bit capability will become 0 and whenever TWT
command comes, host will not wait for ack event and sends command
in a legacy way.
This support is mainly added to handle new host and old firmware
combination.
Change-Id: I55d373c2e017130b58a4b332da16f0eda8f34eba
CRs-Fixed: 2987749
Add new reason code WMI_HOST_ADD_TWT_STATUS_SCAN_IN_PROGRESS
to handle add dialog rejection due to scan is in progress
at firmware.
Change-Id: I30c3d1096690bd0cb7a669206f087e006c23ea44
CRs-Fixed: 2923289
The firmware sends new reason codes due to roaming in
progress and channel switch. Add new reason code for
TWT session.
Change-Id: I3820ac74910e382f5a029de85f8e0915220bb996
CRs-Fixed: 2908384
Add new TWT teardown status code to indicate firmware teared
down the TWT session due to concurrent connection established.
Change-Id: I9b0fb5c5179355f34bd07e91a996da3ade1c9ce8
CRs-Fixed: 2899575
Add support for TWT AP params not in range and IE validation failed
status code.
Presence of num_additional_twt_params is enough to extract the additional
params sent by the firmware, there is no need for extra status check.
Change-Id: I9fa6afd22aa4de1b2a5b75fa98a00f89768dd8cf
CRs-Fixed: 2890682
In nudge response, FW sends wake TSF value. Implement changes
to handle wake TSF values.
Change-Id: I941f1dbab3ba83bba1f0b8e03b83d1b81365c7dd
CRs-Fixed: 2847181
Add support to configure minimum and maximum wake duration
values, minimum and maximum wake interval values for TWT setup.
Change-Id: I69c328815be511833abce0fcd18649e136027f53
CRs-Fixed: 2827115
Add support for WMI_TWT_NUDGE_DIALOG_CMDID and
WMI_TWT_NUDGE_DIALOG_COMPLETE_EVENTID.
Change-Id: I9d4bf1061f6f08479967619ce50d2756c062f55f
CRs-Fixed: 2825138
The bcast twt functionality may need to be enabled separately
for requestor and responder roles. Enable such configuration
by looking up WMI service bit support from target:
wmi_service_twt_bcast_req_support
wmi_service_twt_bcast_resp_support
Change-Id: Ibc91173c23cf69f0d248af27d61c77bee3e8f48a
CRs-Fixed: 2828720
Add b_twt_enable variable to enable/disable broadcast TWT in
wmi_twt_enable_param structure and use FW macro in WMI layer
to enable/disable BCAST_TWT in TWT_ENABLE cmd.
Change-Id: I892e922dda14d16019f3f433f885d1eb5b7169fc
CRs-Fixed: 2793360
The firmware sends a new status code to indicate an already suspended
TWT session. Update WMI_HOST_PAUSE_TWT_STATUS status code to represent
this state.
CRs-Fixed: 2786636
Change-Id: Id1fbdde8691084e408144454214d59c8ad532f9b
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: Ieca2b6845fd2ec32ccdfb1021611bed07379d365
CRs-Fixed: 2609951
Extract additional params obtained from fw as part of
WMI_TWT_ADD_DIALOG_COMPLETE_EVENTID during TWT setup
Change-Id: Ic58a1da463238a748cbf2678fe0156789ebb3559
CRs-Fixed: 2737036
Add WMI support for broadcast twt sta invitation and
sta kickoff. Additionally, update the current WMI twt
fields to include btwt recommendation and btwt persistence.
Change-Id: I88dee854557bbb8c3263f42041e0b90a07cdd27e
If both INI and FW capability is set,
enable capability flag in twt enable command.
Change-Id: I1c070256c4b672b09a1323665fc5a2f166f951fb
CRs-Fixed: 2423718
TWT delete, pause and resume command is upadted by FW to include peer
mac address. Update host implementation to include peer mac in these
commands. Also, resume command is updated to include next_twt_size.
Update resume command for the same.
Change-Id: Iec184d0449b06aaeb9bac558e8cb5322f867e12f
CRs-Fixed: 2279309
Address the following issues in the wmi folder:
CHECK: 'addres' may be misspelled - perhaps 'address'?
CHECK: 'COMAND' may be misspelled - perhaps 'COMMAND'?
CHECK: 'defintion' may be misspelled - perhaps 'definition'?
CHECK: 'happend' may be misspelled - perhaps 'happened'?
CHECK: 'managment' may be misspelled - perhaps 'management'?
CHECK: 'messsage' may be misspelled - perhaps 'message'?
CHECK: 'overriden' may be misspelled - perhaps 'overridden'?
CHECK: 'poiter' may be misspelled - perhaps 'pointer'?
CHECK: 'refering' may be misspelled - perhaps 'referring'?
CHECK: 'refrence' may be misspelled - perhaps 'reference'?
CHECK: 'shrinked' may be misspelled - perhaps 'shrunk'?
CHECK: 'succesfully' may be misspelled - perhaps 'successfully'?
CHECK: 'succesful' may be misspelled - perhaps 'successful'?
Change-Id: Ie97e4d83cc88a2610524b38adc3474cdd31170d9
CRs-Fixed: 2241590
