Currently 11be msdu rate statistic is not supported yet.
Another issue is: HW reported pkt type value 6, while host
SW defined 11be type DOT11_BE (value 5), they are not matching.
DOT11_BE value 5 is referred in monitor mode and otherwhere,
so do map and conversion in host sw side.
Change-Id: Ic5c2dd2a35cbe0ecd6430f007b6e7e02ece40998
CRs-Fixed: 3230900
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Add cdp api to get accumulated pdev tid stats along with per tid
total tid rx and tx stats.
Change-Id: I7862c4265f199d0588d8865c5ed97e06010dd79f
CRs-Fixed: 3207499
Rate limit the log in non-TQM Tx completion path and add a counter
to increment whenever Tx completion status is received and release source
is non-TQM.
Change-Id: I8968ccc7a499577bd4fdfaef78e6520b00c12503
CRs-Fixed: 3201403
Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Define macro for maximum mcs values for 11AX and 11BE.
Also move bandwidth enums to cdp header file.
Change-Id: Ic24b9fa459b160702fa35162955c6bcdf678c97f
CRs-Fixed: 3134964
Added change:
1. Set/reset RXDMA MON STATUS ring filter setting and send HTT
message to capture undecoded frame
2. Handle undecoded frame to update cdp_rx_indication_ppdu structure
from hal ppdu_info rx status and generate WDI event to deliver it
to upper layer
Change-Id: I14485f28333b113b5a2fab639611551c2b08af2b
Add change to fetch and save the WMI service capability of FW to
support multi AST delete using service bit
Change-Id: Iba1af7c230574ae68086357cbb49ae3ca3d944e4
CRs-Fixed: 3118892
Segregate the stats among dp_peer, dp_txrx_peer and dp_mon_peer
structures.
Segregation is done as per below:
* Move stats updated in per pkt path to dp_txrx_peer
* Consider stats updated purely in per pkt path as per_pkt_stats
* Consider stats for which there is an alternate path of
updation as extd_stats
* Move delay stats and jitter stats to dp_txrx_peer
* Maintain calibrated stats in dp_peer
* Move rdkstats_ctx from dp_peer to dp_mon_peer
* Move invalid peer from dp_pdev to dp_mon_pdev
As per the above segregation, if there is not support for
alternate path of stats updation, then stats in dp_txrx_peer is
combination of per_pkt_stats and extd_stats and dp_mon_peer
does not hold any stats.
If support is there, then dp_txrx_peer holds only per_pkt_stats and
dp_mon_peer holds extd_stats.
Change-Id: I2eb81d1b93a178985c05ff4f6557a173cc8a262d
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
use dma_inv_range call instead of dma map and unmap
APIs during replenish and reap. This complete code is
under a compile time macro.
before change: 4160Mbps @ 96.5% (core 3)
after change: 4160Mbps @ 90.5% (core 3)
Change-Id: I61bca349a369ace06cd86f353880108cee013cb1
Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
Customer reported their HLOS LTE-WLAN transition algo sometimes go wrong
for wrong low layer stats, Txretry delta is bigger than Txtotal delta.
Txretry unit is msdu while Txtotal unit is mpdu.
Add vdev/peer stats for mpdu number of successfully transmitted after
more than one retransmission attempt, to align mpdu tx_packets, tx_failed.
CRs-Fixed: 3099490
Change-Id: Id4b9d8fd81af4bf0c141dad481bfd2b3f6c1db2a
Add function pointer to update stats for LI and WKK
Add new fields in structure cdp rx stats
CRs-Fixed: 3071271
Change-Id: I6a1d7afbdfe47d171335d55bf66d210d785f5a03
Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Whenever firmware receives the sync interrupt, it would
update the MLO offset to the scratch registers. Additionally,
firmware also sends a HTT message.
The values from the HTT message are copied into two structures:
1. into the dp_pdev structure, for monitor mode usage
2. into the scn structure for updating the pktlog header
A new WDI event is introduced for MLO timestamp sync into
pktlog header. Host sends the WDI event once it receives
htt msg and the data gets parsed in the pktlog handler and
eventually pktlog header gets updated with those values.
Whenever pktlog memory is being filled, the latest value from scn
structure is filled into the pktlog header. Upon receiving a new
HTT message, the value in the scn structure is updated and
subsequently into the pktlog records as well. All the 8 bytes
from the HTT message are required to calculate the MLO timestamp
offset. The calculation of MLO timestamp offset is to be taken
care by the PKTLOG parsing script.
Change-Id: If1d40b4a889e58b358f0feae692958bca2b8e1de
CRs-Fixed: 3074184
- A new pktlog mode called "hybrid", is added for QCN9224 only.
- Create WDI event for hybrid mode
- Add dummy APIs for monitor filter setting
- Send WMI_PKTLOG_EVENT_HYBRID_TX to FW for umac TLV subscription
Change-Id: I47f4e14bfc766f29a0ab4a8c07ab19e0d919e66b
CRs-Fixed: 3074184
Define MAX MCS to as per 11be
Define packet type as per 11be
Add new RU values
Add new BW gains
CRs-Fixed: 3068482
Change-Id: I18b2460011e2869608fe24743e4373e3e8f3fc1a
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
Add timestamps for last TX/RX in peer stats. This stat is needed to be
passed on to upper layers on demand.
CRs-Fixed: 3059712
Change-Id: If0d8b7dc3c139e4d1b670bf98f3f574f02ea9715
In case of successful transmission If MPDU tx
is retried more than the threshold then
increment MPDU retry count by transmit_cnt / threshold
Change-Id: Idbc7e2d0579ff68e272132fe4ffe9f951c4aacf5
CRs-Fixed: 3058464
Add changes to register separate function pointer to receive EAPOL
frames instead of using regular RX path and adding export symbol
for __qdf_nbuf_data_get_eapol_subtype() to access in it multiple
modules
Change-Id: Id05b982d31a7e008536d10dd5281e88cceba96db
Firmware sends some ppdu stats required for packet capture
mode in new ppdu stats tlv HTT_PPDU_STATS_FOR_SMU_TLV.
Add code to parse it if feature is enabled via ini and
send the ppdu stats using wdi event to packet capture
component.
Change-Id: I5567007a91093dd342f37458760b3a61c040b779
CRs-Fixed: 3004476
Currently, rx packet capture events processing happens even
when feature is disabled by ini. This incurs per packet overhead
in rx path.
The fix is to move all the processing from rx path to packet capture mode
component. Send only wdi event from rx path, when feature is enabled by
ini.
Change-Id: I647256b85117cd3373950c78a5a0ae7d6710e4e2
CRs-Fixed: 2969123
Define a new cdp interface structure and API for soc stats for use
by upper layers to fetch dp soc stats.
Change-Id: I314e952546551003da2ca7f69b2e1aa23c126e66
In case of aging out wds entries, avoid sending all
the wds delete wmi commands in a huge single burst.
Instead limit the maximum commands to half of the
wmi queue size. Inactivity will continue to be
marked every 120 secs but the inactive entries
will be flushed every 5 secs if there are pending
entries.
Change-Id: I6735704a0750ef466f1df798f0b354f4382098d6
CRs-Fixed: 2952682
added new WDI event index for tx capture, share same index cause
corruption when switching different feature without delay.
Change-Id: I9e7a849968544957491891629eb42974c8b65728
Add and initialize a preallocated pool of buffers which can
be used to replenish RX buffers. During replenish, the buffers
from the pool are used instead of allocating/mapping a new buffer
in the softirq context. This preallocated pool will be refilled
in thread context.
Change-Id: Idf3bd7d25c5d57ddba105ccd8fab672c26a184f1
CRs-Fixed: 2869345
This change will set up monitor mode status and destination ring
filters for enbale CBF logging and will enable destination ring to
capture CBF frame. This change will get the CBF frame from the
destination ring and send it to the pktlog module for post processing
through WDI event. CBF is a compressed beamforming report.
Change-Id: I4cc419440ba8d60446dd1f01747340a89f023171
