On receiving the peer unmap event the ops
is called without the mac address of the
peer for which peer unmap is received.
Add mac address of the peer for which peer
unmap is received.
Change-Id: I9026433089963818d5a227a0660866ff504dea84
CRs-Fixed: 3238626
Set function pointer for SCS peer lookup and rule handler.
Add a new module id for SCS.
SCS database maintained in dp_peer structure is redundant as
same info is maintained in control peer. Therefore remove
SCS database from dp_peer structure and also remove APIs
which access/update this database.
Change-Id: I951f12de487a4be3ae169d1e309352e4e5031fc9
CRs-Fixed: 3226693
To avoid unmeaningful rate fluctuation, when report
rx linkspeed to upper layer, exclude special frames:
arp/ssdp/dhcp/eapol/ipv6 NA/NS/DHCPV6 in low rate.
Change-Id: I4bc49a808a02b4bc8c687f70690922045d65e739
CRs-Fixed: 3198484
Add function pointer declaration for SCS peer lookup and rule
match and also define cdp call for the same.
Change-Id: I4329b746a12f019a077652d02625b76c7f5fa21f
CRs-Fixed: 3226475
To support WDS feature in IPA driver, WLAN needs
to update the ast entry for any new rx packet, and for
end-nodes connected via repeater to root.
CRs-Fixed: 3226348
Change-Id: I7383b12f18e7c70ec06499d66130667eca033131
Add extra actions for tx peer filtering. This actions are used
to indicate to FW for the first peer addition and the last peer
deletion. This will be used by FW to set and clear peer filtering
related registers.
Change-Id: I1488146f54f3aab82651f4a27823a9b977d7b307
CRs-Fixed: 3237958
Add delta_tqm, delta_tsf2 and mlo timestamp offset for BE.
These offsets are used to calculate hardware Tx completion delay.
delta_tsf2 and delta_tqm are updated during init. mlo timestamp
offset is updated whenever target sends the update event.
Also, adding CDP ops to set the offsets.
Change-Id: I55665982798c3a795481fa96c023bb851ea17476
CRs-Fixed: 3220906
The telemetry agent on certain intervals needs to pull the
SAWF stats from the driver.
Add CDP ops to pull the SAWF stats from the driver.
CRs-Fixed: 3210834
Change-Id: Ibc27059ff13b33acc4e71d3174a0415756dcfc5e
Since more than one components depend on reap timer of
monitor status ring, add bitmap to record the trigger
sources of the timer and refine the APIs/calling functions
accordingly.
With this change:
When a new start request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit set, and start timer
if any bit has been set in the bitmap; while for the
other sources, set the bit and start timer if the bitmap
is empty before that.
When a new stop request comes, if the source is
CDP_MON_REAP_SOURCE_ANY, skip bit clear, and stop timer
if any bit has been set in the bitmap; while for the
other sources, clear the bit and stop timer if the bitmap
is empty after that.
Change-Id: Idaa7837c4b93b247ff2236aa5072d309fa9548c2
CRs-Fixed: 3190347
This enables the option to configure when a peer's
TID queue needs to be flushed. This is required to
discard packets that are no longer useful to the application.
Change-Id: I558debff043fc0c8038e5f5f2c815b64c90e1561
CRs-Fixed: 3130422
Use CONFIG_SAWF macro to prevent linking dp_set_delta_tsf in
low memory profile.
Change-Id: I07b75f893e6d043839225d9b7288823b6ef2f823
CRs-Fixed: 3211426
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Add WMI command for tx peer filtering. This command is needed to send
the mac address to FW for which tx monitor peer filtering is needed
to be done.
Change-Id: Ia141fba81ba240b7f4ca015eb9251e3485294bb6
CRs-Fixed: 3199493
Add cdp api to get accumulated pdev tid stats along with per tid
total tid rx and tx stats.
Change-Id: I7862c4265f199d0588d8865c5ed97e06010dd79f
CRs-Fixed: 3207499
Define a new function to calculate HW delay so that same logic
can be used to calculate delay by other modules.
Change-Id: Id3740bcaa2cd558b89ab02d8e88d5947eb5997b1
CRs-Fixed: 3198305
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
In QCN9224, when 11v DMS feature is enabled use
FW based DMS support instead of SW based WAR.
Change-Id: Icc5b9740f71bd00862e06950e4fe49c663d513b4
CRs-Fixed: 3182547
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
After enable and disable of both radio, If second radio is enabled
then the instance_id from wlan driver is passed wrongly to IPA driver
which is in leading to initializion of first radio on IPA driver side.
Fix is to take the instace id based on psoc id and set the prod and cons
pipes based on instance_id instead of IPA given handle.
Change-Id: I26f4f3fbd23284e79a380d212ad07aceac50f053
CRs-Fixed: 3179306
RSSI calibration parameters are received as part
of WMI event from FW, update these parameters to
monitor pdev via CDP interface.
Change-Id: I5060795918571763ad467aae93729040fbca96a1
CRs-Fixed: 3147897
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
Enable usage of delta_tsf for SAWF. This will be used to compute tx
delay. Also, add support to update sawf stats in tx completion.
Change-Id: Idab7fbd5217175167ecdeee21cf5dc9daf1415d6
CRs-Fixed: 3135773
The monitor status ring is configured for filtering
in undecoded phy error packets. Each phy error can
be controlled using a specific error mask configuration.
Added below cfg80211tool command to configure phy error
mask for filtering undecoded phy error packets.
cfg80211tool wifix set_phyrx_error_mask mask_0to31 mask_32to63
cfg80211tool wifix get_phyrx_error_mask
Change-Id: I5e4f6a49458cc534d6d1d0f7f2a7424f3cc747b4
For 1x1 DBS case, host also need to configure max_mac_rings
as 2 and initialize each RX ring, currently host only consider
2x2 DBS case.
Check DBS capable instead of 2x2 DBS capable only.
Change-Id: Ic2d4fda9be245a3d0448b6b87ba8676f41d9187e
CRs-Fixed: 3129165
2x_pdev changes are include for support new IPA API's
and change the existing API's argument to support new
parameter which is ipa handle, create a new API to get
the IPA hdl from IPA component in DP
Change-Id: I3d2b378620dbd1e64d295623534126e0eebc2d28
Use chip ID and destination peer to determine the target soc
and partner vdev for Intra-BSS in MLO case.
Change-Id: I709c52e74426c5e81b50c8063cad7669c0e7002d
In BE architecture, HW provides basic vdev stats support for upto
48 vdevs. For each vdev, there is vdev_stats_id which represents the
id of this vdev on HW. This vdev_stats_id is assigned by host and
is conveyed to HW at the time of REO TID Queue setup for the peer.
Add logic for allocation and deallocation of vdev_stats_id and
convey this id to HW.
Change-Id: If5611bf54d057ccf71c6444b5c79a26eb28df87e
CRs-Fixed: 3067843
In ME6 we are currently using a workaround to send the native wifi packet
through the exception path, as the older HKv1 hardware didn’t support
single packet AMSDU. Since, the hardware is supporting this starting
from HKv2, we are sending ME packets as normal packets to FW with
DMS indication in Peer based meta for Beryllium.
Change-Id: Ic154b438df2c811c845e7c2eaadf252985d419ad
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
Add support to invoke HIF runtime PM APIs in TX packet path based on
throughput level. Essentially at high throughputs, where runtime PM is
not expected to provide power gains, invoking the APIs is deterimental to
performance.
Hence invoke runtime_pm APIs based on throughput level.
CRs-Fixed: 3059712
Change-Id: I49d111bffa8a37c68abbdd54911f9ecc22430562
Add API to get dp peer authorize state.
Also modify dp_tx_get_rbm_id_li to update rbm for IPA offload
scenario
Change-Id: I0f8cca4623a1c3b840f336aa6d67740951cb6700
