Add support for NAPI schedule latency and poll time histogram stats
for WCN6450.
Change-Id: If982ebe4e3cfa80f47c6d2fe9d4cb9dfa318481d
CRs-Fixed: 3485287
Extend the feature to detect tasklet latency for all CEs.
And also introduce a build flag
DETECTION_LATENCY_TASKLET_MASK to control the enablement
of each, set bit-X to enable detection for CE-X, the
default value is 0x84(BIT(2) | BIT(7)).
Change-Id: I2874d1d50fc5febbf028ebb48ba64e11977c8c34
CRs-Fixed: 3474314
As IPA has moved out of the kernel, ipa_uc_reg_rdyCB
interface call from WLAN is not needed anymore
as ipa_wdi_init_per_inst() initialization call will
handle this. This change will add support to retain
this call only for legacy devices.
Change-Id: Icb479562e091d388e03ef5a38b3e95d4dbf06271
CRs-Fixed: 3459071
1. Add an API to process trigger_umac_recovery T2H message.
2. Synchronize do_pre_reset, do_post_reset_start, do_post_reset_complete
messages for all the SOCs and then process these messages in the host.
3. Synchronize pre_reset_done, post_reset_start_done,
post_reset_complete_done for all the SOCs before sending it to FW.
4. Add a new state in host for trigger_umac_recovery message.
Ignore back to back trigger_umac_recovery messages received from FW.
Change-Id: Id45d326d63e122834090844e83ad6cc7240f96af
CRs-Fixed: 3425833
Add the following hif/ce changes to add support for wcn6450,
* New host/target wlan ce config for wcn6450
* New service to pipe map for wcn6450
* New host/ce/target table attach for wcn6450
Change-Id: I20fa1410f5e4e7a0146bc2d0b48a18269ca4a8c9
CRs-Fixed: 3381111
This change will hold the PCIe in L0 state for the
duration of this feature. The hold will be
released after data transfer is complete.
Change-Id: I762bc3423059ad641bdd00ac5b301a1e1b16f6c2
CRs-Fixed: 3406490
Add hif changes for umac reset in QCA5332. Changes are done to read the
umac reset IPC number from dst and request irq for the same.
Change-Id: I0feafb06ef63f37c3ae6db0270bd5ed50debd91d
CRs-Fixed: 3401146
The kernel-doc script identified a large number of kernel-doc issues
in the hif/inc folder, so fix them.
Change-Id: Idb9a748c71ab71122b74ac9d2665ead474c649ff
CRs-Fixed: 3375492
Add changes to move ioremap of PMM SCRATCH register outside
interrupt context, as ioremap in interrupt context in not valid.
Change-Id: I0fa645c55e10a5241011a1f4ffdccdca48c50d29
CRs-Fixed: 3371194
Observed NAPI of REO2SW1 hard to complete caused by slow CPU/schedule
on REO2SW1, hence IRQ of REO2SW1 keep disabled during the polling which
impact other MSI as well in single MSI case, until hit REO2TCL timeout
and crash.
The fix is complete the dp rx NAPI poll and re-enable the irq if the
irq disabled for long time.
Change-Id: I5e70d9646b78307ab0c35e2ac0d6e3647804c476
CRs-Fixed: 3332143
Modify existing API used to fetch direct link destination
buffers to also get destination buffer size.
Change-Id: I6c220fe9bbb216f1c0db2e1e38da2ce8314fe47b
CRs-Fixed: 3347321
Add support to record last busy events on RX CEs,
this helps to check how frequent CEs are marking busy.
Add support to display last busy history and runtimepm stats.
Change-Id: I856ce54a2f1c6b26722d27623343fc0a2c202c6f
CRs-Fixed: 3337902
Store ini config delay value and current delay value in RTPM
context
Export API to update delay and get current delay in ms for RTPM
timeout.
Export API to restore delay to default value.
Change-Id: I53e9e17d983c2cc6fe317159c8c46d792e56c04e
CRs-Fixed: 3332132
The MSI address and data information for Direct Link
copy engines will be available once the WiFi driver
on LPASS is initialized. Add support to configure the
IPCC address and data values into Direct Link copy
engines at runtime.
Change-Id: I5e7dff90c2f1ff764462c235deb5795ed019a16b
CRs-Fixed: 3316679
1. Changes to support cmem write for AHB devices.
2. Interrupt enablement issue - Incorrect CE address was given which is
fixed.
3. dp_soc_init failure - dev_base_addr of Miami was NULL, which is
fixed.
4. Missing interrupt error logs - Added dummy entires for missing
interrupt in DTS and changes to support shared IRQ in wifi-drivers
Change-Id: I00e7666b2b978c35b5ccec5da21bf442ed0a7998
CRs-Fixed: 3268936
Throughput based RTPM logic of ring access may fail and
lead to NOC error in some corner cases. Change is aimed
to add additional link states check to prevent invalid SRNG
access.
Change-Id: I7e7edbadfd21b4857efa4faff0ada6d94d682f2c
CRs-Fixed: 3256702
Add provision to call sync prevent suspend which will wait for
system to resume and increment usage_count before returning.
Change-Id: I855e3fc2660dc7f3f78bb70f8eef6228cbef96d3
CRs-Fixed: 3253335
Added new file specific to qcn9224 v1 defs. Use qcn9224defs.c for v2.
Added changes specific to soc version check.
Change-Id: I5b6aedbb8aba2de847e0f4d47212a25b36bfa7c8
CRs-Fixed: 3243676
Add support to log latest CE descriptor history which helps
to identify CE scheduling/reaping delays when full debug
history dump is not available.
Change-Id: I44a5c86a3e1dd4861bfd2e77b3f772d5d53bcedf
CRs-Fixed: 3225155
If there is no resourse to send packet via HTC, then check if interrupts
are not processed from that CE for last 3 seconds. If so, schedule a
tasklet to reap available entries. Also if Queue has reached 1024 entries
within 3 seconds, then also schedule tasklet.
This change is added because there is a case where intermittently
completion interrupts are not received from CE3 and hence adding
this WAR in host to come out of this issue scenario.
Change-Id: I126cd5e678517127659237308f8f6b1313f8f422
CRs-Fixed: 3234943
Create a HIF context for UMAC reset handler, register the datapath UMAC HW
reset callback handler with HIF layer, request for UMAC HW reset interrupt,
and schedule a high priority tasklet to process the interrupt in which
call the registered DP callback handler.
CRs-Fixed: 3184312
Change-Id: Iefc811bf0d1b093c3c63bf2238c94a1448f4f139
Currently, different modules had different ways of allowing
and preventing runtime suspend. Multiple debug mechanisms
were introduced and workarounds are present as well bloating
the runtime PM module.
This change is done to clean up and restructure HIF runtime
PM module. Modules using Runtime PM module need to register
with an ID present in hif_rtpm_client_id.
hif_rtpm_get() will increment the device usage_count and
prevent device from suspending. Based on argument type, if
system is suspended, subsequent resume action will be done.
hif_rtpm_put() will decrement the usage_count of device and
if it is NULL, based on type of put call, idle sequence will
start. Register HIF module and update respective get and put
calls done from HIF module.
Change-Id: I23747f0f7208e689c1c9eb55789aa81945f596ec
CRs-Fixed: 3169272
As dynamic allocation occupy cnss prealloc memory, which may
cause this prealloc pool to be exhausted.
Move dynamic memory to static.
Change-Id: Ia3500868cbcdbd9676f72a3588462ab0d6a21088
CRs-Fixed: 3171015
Currently if write non-shadow register and not in initial
phase, host will call hif_force_wake_request()-->
pld_force_wake_request_sync(), but this API can not guarantee
MHI/PCIe is in wake state if runtime PM suspending is ongoing
in parallel, later any register accessing through PCIe bus will hit
NOC error.
Add hif_pm_runtime_get_sync() in hif_force_wake_request() to prevent
runtime PM suspending.
Change-Id: Id60c6041a830d9ad27b0b4173a036c9c57fbf350
CRs-Fixed: 3120170
Add Legacy interrupt changes for Beryllium target. Added code to initialize
legacy interrupt for Copy engines and also to request irq for hif group.
Change-Id: Idb5635d376b9dfcf1e4c595a829d7bef467870b4
Align the string entries inside the rtpm_string_from_dbgid()
function in the order of wlan_rtpm_dbgid enum entries.
Change-Id: I455e93723f5df882babb758a4979d1b1cecd8e7e
CRs-Fixed: 3128352
Different targets can have different WMI endpoint count. Add an API to
get this count from the target service map. This API can be used to get
max WMI ep count for a target to perform endpoint connect request only
till possible count.
Change-Id: Id90bcadfb23fbff12d10bf8b6ca825142d3f1bdc
CRs-Fixed: 3121598
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
Current there is no ce debug history when testing
perf build, so it is hard to debug some issue.
Here it only enable ce2/ce3 on perf build, which keep
only necessary log here.
Change-Id: I29b998939cfa25f0547a9871721c6daeb0fdd961
CRs-Fixed: 3058740
Add HIF events to track NAPI POLL exit time, this gives
information about actual time spent by wlan host in napi softirq.
Change-Id: I7548fd05f2f7db714ac9bcf79171ffb3d478e936
CRs-Fixed: 3052902
Current it use __RET_IP to get caller in rtpm resume
function, if it print info by %ps, it will do a
symbol lookup which takes time.
Change as replacing __RET_IP with rtpm_dbgid, so it is
still able to get caller information and avoid time
cost here.
Change-Id: Ifc70c118d621bb9e6d12de87582de09316ae9cad
CRs-Fixed: 3001690
Based on the bitmap whether the issue is because of the
HIF_DETECT_TASKLET or HIF_DETECT_CREDIT, the hif_latency detection
code needs to be refactor to different functions so that it will
help parsing tools to find the reason of crash.
Change-Id: I2d8a83493354dfbd1c484cb7727018ddeb14c158
CRs-Fixed: 2929736
IPA and rx_err ring are processed in same CPU resulting
in low Tput.
To fix this, not allow processing of rx_err ring in
CPU 0
Change-Id: Id53a03c9290607beb1a595c84bfb0fd8d9f5d105
CRs-Fixed: 2949569
After reg work is complete there is possiblity EP vote reset
request still not processed by F.W. So wait till EP vote reset
is done after reg work completion.
Change-Id: I1f4e318ac96ba3a15c613c5faf5095d4be7c8e99
CRs-Fixed: 2994233
Add api to set intermediate EP vote access state.
Make sure reg work handler is complete before setting
intermediate vote access.
Change-Id: Ib229d9af8b1e58505a9ae5fbf39aa912ca21a3c3
CRs-Fixed: 2994040
