Support 11d for non-offload platform by maintaining
count of beacons encountered for each country code
and choosing country code with max votes as device's
country code.
Change-Id: I83b66e980854eded17e254386561fa32b1f8c4ac
CRs-Fixed: 2154048
If sub-channel marking is not supported then make sure to
add all the dfs channels in bonding channel list to NOL.
Change-Id: I27d738974bb2b2cfdb9dbcd944f5843cc3aeed93
CRs-Fixed: 2164692
STATUS_DONE is missing sometimes in monitor status ring,
causing stalled processing in host and backpressure to RXDMA.
Adding a WAR to skip such entries.
Also increased the size of monitor link descriptor ring since
multiple descriptors are used for large MPDUs.
Change-Id: I556b4196482ed738471afc1f7e7b73cf3f8fbc51
Change WMI initialization sequence to support WMI modularization.
TLV and Non-TLV modules calls WMI module registration based on target type.
WMI attach will call respective attach routines based on registration.
Change-Id: Id56446f491d129758537913d2d5d6633f8dec918
CRs-Fixed: 2179854
Save BSS and desired channel information per vdev to access
it across all the modules.
Change-Id: I7729e0ae902643d0a2c61184b9ddc2babd07179e
CRs-Fixed: 2166359
When wide band scan is enabled, host configures all possible
channels with all possible phy modes. In his case if a scan
is invoked with 0 channels, target will end up scanning each
channel with all possible phy modes which increases scan time
exponentially.
If wide band scan is enabled and scan is issues with 0 channels,
configure target to scan all available channels only in 11A/11G mode.
Change-Id: I7c678ccf43c3238aacbfc59cc7e7bd19763453cc
CRs-Fixed: 2165025
Expose the target_if ap's for the set/get different values in the
target_psoc_info.
Change-Id: I7e84482faa46606b39bb64b82fe541b96f0eccce
CRs-Fixed: 2184015
Store the Tx data buffer of MAX_DATA_SIZE bytes as part of CE descriptor
debug information. Add sysfs API to dump the CE descriptor+data debug
information on console.
The CE descriptor and MAX_DATA_SIZE bytes are stored for Tx packets which
would be used to debug any CE related issues.
Change-Id: I68a765c6219a2ff2a6a7adc7e8ed031f8957d243
Wrapper API is required to support building against multiple
Linux Kernel versions.
CRs-Fixed: 2184496
Change-Id: Ic4f3f6cf10910bd20b89dee0b250ea3ff265be70
Remove dependency on WMA layer for green AP component by registering
green AP events through target_if layer.
Change-Id: I8fe9079c6ba6b23cd5f1d98a7d1b333fde31f19b
CRs-Fixed: 2178143
command:-
1. "iwpriv athx s_txpow param1 param2"
2. "iwpriv athx g_txpow param1"
param1 = frame_type<<8+frame_subtype param2 is power_value
if subtype == 0xff means set all subtype of that frame type
Change-Id: I8c68e1ca6a5829a3f0cf01b2c32c3332e1010243
CRs-Fixed: 2175241
Set update_peer_cache, learning_frame bits in meta header for all
the frames that are sent to firmware.
Change-Id: Id8dac0007cc87f792859e5108ddfa77746166b49
CRs-fixed: 2180223
1. Remove below country codes:
ARGENTINA (5003)
AUSTRALIA (5000)
CANADA (5001)
KOREA ROC 3 (412)
UNITED STATES (841)
UNITED STATES (842)
UNITED STATES (843)
BELGIUM2 (4101)
INDIA2 (5006)
2. Update regdomain
ARGENTINA from FCC3_WORLD to APL16_WORLD
BELIZE from FCC3_ETSIC to ETSI8_WORLD
CANADA from FCC3_FCCA to FCC6_FCCA
CHILE from APL6_WORLD to APL23_WORLD
JAMAICA from FCC3_WORLD to FCC13_WORLD
NAMIBIA from APL9_WORLD to APL20_WORLD
NEPAL from APL6_WORLD to APL23_WORLD
SENEGAL from FCC3_WORLD to FCC13_WORLD
UNITED STATES from FCC3_FCCA to FCC8_FCCA
3. Add IRAQ country code
4. MCL country Lookup table
Change-Id: I4b0468d9256ac919a2684d1980f8b017a8107248
CRs-Fixed: 2180713
Increase the maximum value of unit test arguments to 100 to include
support DL OFDMA RU allocations for testing / debug.
Change-Id: I33ed8d53931e33cc00069653ea38b543339203c0
CRs-Fixed: 2175616
Set link descriptor memory address to NULL after freeing to ensure
it is not freed again. This is seen with soc_detach called during
attach failures.
Change-Id: I7338cb8c64fcb652c95f42bcb9e998a6f043cecf
CRs-Fixed: 2160703
When TLVs come from TAC_thread last tlv sent by FW is
HTT_PPDU_STATS_SCH_CMD_STATUS_TLV
and in Tqm thread HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV is the last
TLV to be sent. HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV though can
come either in tqm thread or tac thread based on tid type.
Add change to process HTT_PPDU_STATS_USR_COMPLTN_ACK_BA_STATUS_TLV when it
comes from tqm thread and pass the populated buffer to the appropriate APIs
Change-Id: I7a064aba4e3c6814b63dcf4bb97cfb3be0194c39
CRs-Fixed: 2180477
The map\unmap checking logic need to be revised. Before that, it
is needed this hotfix to unblock other test.
CRs-Fixed: 2175684
Change-Id: Ife8147526307924079be9081eaf17323f67b87c0
* Wrap ol_txrx_vdev_peer_remove_cb, so that upper layer can invoke it.
* Remove roam_synch_in_progress from ol_txrx_vdev_peer_remove_cb.
roam_synch_in_progress is a parameter of ol_txrx_vdev_peer_remove_cb,
But invoker cannot pass value to it. And it is concept of wma, it's
improper in cdp.
Change-Id: I6fa6c1b2df4919ad34ec931c4217bec0eefb2eac
CRs-Fixed: 2176165
pass psoc/pdev object as ctrl pointers to instead of legacy objects.
It introduces new APIs to get feature pointers of psoc/pdev.
DP attach API param modified to pass ctrl psoc (psoc object)
Change-Id: I3d83f28c3e72e5ee984a4220b9d5cf3c4522b501
CRs-Fixed: 2177109
Implement service ready, ext service ready
ready event handler, init command preparation
and other required APIs
Change-Id: Iaf707227c1e94bb492dd86bd2d0916a1cf875498
CRs-Fixed: 2177109
Define psoc/pdev target_if structure and implement
alloc/free of these structures
Change-Id: Ie741d0de77c48caa843d4f2b33220a987366ba9b
CRs-Fixed: 2177109
Introduces QDF API for wait_queue_timeout() to allow
driver to use. This API helps to wait for the event for
configured time
Change-Id: I9640368120fd09b19f64f028f1eb3aab46b7c97a
CRs-Fixed: 2177109
In extract_ndp_confirm_tlv & extract_ndp_ind_tlv, ndp_cfg len &
num_ndp_app_info is from fw. If they are greater than the actual
length of buffer sent in FW, OOB access and info leak would occur.
Add sanity checks for ndp_cfg_len and num_npd_app_info with the
actual length of the buffer from TLV header in functions
extract_ndp_confirm_tlv & extract_ndp_ind_tlv to prevent OOB access.
Change-Id: I9ecf55a3606036d3e1f0916c948c4360475965fa
CRs-Fixed: 2176968
Current target_if Spectral simulation layer code is not following
coding convention rules in some places.
Change-Id: I0bf0f0514b65e17ddce9fb803c647448ee4b5b3a
CRs-Fixed: 2151555
Current target_if spectral layer code is not following coding
convention rules in some places.
Change-Id: I1c0e78c6cdbe97db657c341d74582567a29a86b0
CRs-Fixed: 2151555
Current Spectral dispatcher code is not following coding convention
rules in some places.
Change-Id: I0370ca91c8b5ac3a31ae07d6be7d18a3290790f8
CRs-Fixed: 2151554
Current Spectral core functionality is not following coding
convention rules in some places.
Change-Id: I2109e510351d254652cbab16f09e52ec463abebb
CRs-Fixed: 2151550
