Tx descriptor is not being freed and put back in tx desc
pool for a long time. As a result, system is not going
into suspended state.
To find this descriptor, during dp_bus_suspend and
dp_runtime_suspend, parse through the descriptor pool to
check for any descriptors not freed for a long and trigger
self recovery when found.
Change-Id: Id97c5c8537c9bec922f4e254b5bf094505ee61ff
CRs-Fixed: 3109868
The following issues are fixed with this change-
1. Sojourn stats were printing incorrect values
2. RSSI values were junk numbers
Change-Id: Ibed73cf370a309bf9db5baad37a0e8261c58463b
Multicast support for MLO
1. Following functions are newly added.
dp_rx_igmp_handler()
dp_tx_mlo_mcast_handler_be()
dp_rx_mlo_mcast_handler_be()
dp_mlo_get_mcast_primary_vdev()
Change-Id: If215f843369e6e2621ef302b924e524c86f0d30b
In the case of MCC due to low power mode atomic operation in
accessing the bank is resulting the crash.
Fix crash by using spinlock for WIN and mutex for MCC.
Change-Id: I5bb49cbed32e41ad88bfaeb24496adb180e37551
In the case of RAW mode, VAP parameters encap type, dscp_to_tid map id
and cipher are not updating in bank register.
Added a API to update vdev param.
Change-Id: I702bee563e7451f403fa32292bf20680cd66e213
CRs-Fixed: 3078687
Changes to have HW cookie conversion context per
desc pool.
This context will be used to program CMEM of the
other SOC in case multi-chip MLO.
Change-Id: I5ec68813e8fcb6d124698a52f5553acf9a7b1795
Currently, to set checksum enable flags in Tx descriptor
we are checking the csum_enabled flag along with stack checksum
offload request. In case of roaming from latency-critical connection
to non-latency critical connection we request stack to calculate
checksum and set csum_enabled flag to 0. For some packets which
are already queued where the stack has not calculated checksum and
csum_enabled flag is set to 0, we will not set the checksum enable
flags in Tx descriptors for those packets.
To fix the issue remove the csum_enabled flag check and directly
check if the stack has calculated checksum for those packets or not.
Change-Id: I8d7754afc3d0a33315b85b0113cd3062e5783e28
CRs-Fixed: 3070858
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
For STA mode when index based search is used ADDR_X
flag need to be disabled. This is needed to generate
HW mec notify events to FW
Change-Id: Ib074c474f6e06accf09adeb53b3a1f85e30d4076
FW has some usecases when it needs to enqueue frames into hardware. In
BE WLAN chips, some hardware TX desc fields are moved into Tx
banks, hence a TX bank is also needed to queue to HW.
Dedicate a bank for FW usage.
Change-Id: I1f19f0ef85aff4c7592b0f07de4631259da743a6
CRs-Fixed: 3016828
Below are the changes in HW headers for E1.5
1) WBM2SW release source enum changed back to lithium values
2) DSCP to tid table num is added in Bank register
3) MCAST ctrl value is moved from Bank to seperate register
Change-Id: I342c451d792b1618dcb62ca9d4c77dcf4d4beeac
The following configurations are changed
- Change numer of WBM2SWRELEASE rings from 7 to 8
- Use configurable RBM value when enqueuing packets for TX. This is needed
since WBM release ring numbers do not have an easy mapping to RBM values
for HMT1.0.
Change-Id: Idcf9e48e00b7039331fc1837bb1e900b12f19eb3
CRs-Fixed: 2984362
Add number of page desc check for TX/RX desc_pool de-initialization,
avoid unexpected assert in case SPT page_desc_list is not
initialized like SSR case.
Change-Id: I970f0e09a0631260e1cb0d1de23a1de3e8d13f24
CRs-Fixed: 2991334
(1)naming change in HW CC related function
(2)refinement for cookie ID generation regardless of
SPT page address 4k aligned or not
(3)move CMEM size check under cookie conversion macro
Change-Id: Ib32d802f5512e5facfa4130826406943fb3d27f1
CRs-Fixed: 2977304
Add the handlers to process the near-full irqs for
the rx, tx_completion, wbm_error and reo_status rings.
Change-Id: Ia5a2abb6d66a96e8dcb5c651d24769382db0d666
CRs-Fixed: 2965081
Move DP TX target specific functionality to dp/wifi3.0/be
and dp/wifi3.0/li folders. DP Functionality common to both lithium and
beryllium targets stays in dp/wifi3.0.
Change-Id: I3497284153e2ea30a9cb1faf05bd41422329b804
CRs-Fixed: 2891038
