DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
Add the handler for processing the htt
peer map/unamp v3 and MLO peer map/unmap msgs.
Change-Id: Ie2ab0b76e7aee566ca3b9637b83fd7a14718ab01
CRs-Fixed: 3039326
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
In case of aging out wds entries, avoid sending all
the wds delete wmi commands in a huge single burst.
Instead limit the maximum commands to half of the
wmi queue size. Inactivity will continue to be
marked every 120 secs but the inactive entries
will be flushed every 5 secs if there are pending
entries.
Change-Id: I6735704a0750ef466f1df798f0b354f4382098d6
CRs-Fixed: 2952682
Currently there are no sufficient debug logs during
AST cleanup of peers, to conclude in which context
the AST got freed up, hence adding more debug logs.
Change-Id: I5603d856aed8cc3860a78d24d51cd8b5386d38bb
CRs-Fixed: 2956910
Add iwpriv option 34 to dump the reo rx h/w descs
in DDR for debugging. This cmd will first send cache
flush cmd to REO for all rx tids and invalidate the h/w
cache. Henceforth ensuring that the reo status tlvs and
the DDR values are in sync.
iwpriv wlan0 txrx_stats 34 0
Add fix to ensure bar frame with 2k jump err code is
processed correctly using the REO error code instead of the
REO push reason.
Change-Id: Ia05be668343f3a5d4b3262b8d6a367a50875add5
CRs-Fixed: 2895965
In teardown API update logical delete state to peer
before deleting AST entries of peer. Also in delete
AST API use __dp_peer_get_ref_by_id to get the peer
Change-Id: I6db227a284cf3726cc241ebc98386230eca58fcf
Delete self ast entry along with other ast entries
belonging to peer during peer tear down
Change-Id: I08373929b7e510d79cd677b12f3ee897c1c6790b
CRs-Fixed: 2776743
With new design, peer is deleted from hash table in
cdp_peer_delete. Hash table search in dp_peer_can_reuse
API at cdp_peer_create will always fail
Update the peer reuse logic to search from inactive list.
Insert peer to inactive list from cdp_peer_delete() and
in peer reuse case search in inactive list to get
peer.
Also add a new lock to protect peer state transition
Change-Id: I2e672fc4a9346c95d67716d437538dd0f96b2207
In roam HO failure, peer unmap indication is processed
even before Host initiates the peer cleanup. In the cleanup,
as part of cdp_peer_teardown, AST entries are freed up without
removing it from the peer AST list since get_peer_by_ref_id
returns NULL peer pointer as peer is moved to inactive state.
Fix is to delete peer AST entries as part of peer unmap
indication so that the entries are removed from the AST list.
Change-Id: I1b04517e8cc392b33bb439501e61e3d5534d8307
CRs-Fixed: 2763825
Add debug support for VDEV refcount to take
refcount by module id and decrement corresponding
refcount with same module id
Change-Id: I15c075816994ba70155fefbc0bce208b20fb9a59
Add new APIs to iterate through the vdev peer list
by taking the peer reference.
A call back has to be passed to these APIs which will
be called for every peer in the lisst
dp_vdev_iterate_peer() -> iterates through peer_list of vdev
dp_pdev_iterate_peer() -> iterates through peer_list of all
vdevs in pdev
dp_soc_iterate_peer() -> iterates through peer_lists of all vdevs
in soc
Additonal APIs are added to for itearations where the callback
will be called outside the vdev->peer_list_lock, as these APIs
have additional memory allocations suggested to use only in case
the iteration need to happen outside lock
dp_vdev_iterate_peer_lock_safe()
dp_pdev_iterate_peer_lock_safe()
dp_soc_iterate_peer_lock_safe
Change-Id: I24632fe611355cc3e93b7f16d90913d4b8686ca9
Remove the peer backpointer in ast entry and store
peer_id instead
Assign peer_id in AST entry in AST MAP event,
also add the ast entry to peers ast list
In AST map & AST unmap APIs use ast find by vdev_id
Change-Id: I74d9828dc309149d98f6f577b5c8304cb087fd76
Add support to get the peer reference with module id
To help debug the peer reference related issues
Change-Id: Ie20c7e710b9784b52f2e0f3d7488509282528a00
Use unified version of dp_peer_find_by_id API
which will take peer reference
Also use unified peer ref release API dp_peer_unref_delete
Change-Id: Ibb516a933020a42a5584dbbbba59f8d9b72dcaa4
Update peer DB as per new design
peer_hash_table: add at peer_create and delete at peer delete
peer_id_to_obj_map: add at peer map and delete at peer unmap
peer_list: vdev level peer list add at peer create delete at
peer delete
Call dp_peer_cleanup() at unmap event
dp_peer_cleanup -> dp_peer_tx_cleanup -> Tx capture cleanup
|
---------> dp_peer_rx_cleanup -> Cleanup Rx REO TID queues &
defrag queue free
Introduce ref_cnt variable per VAP which will be
incremented and decremented at peer alloc and free. This counter
will be used to delay the vdev free if there are any active
peers for vdev exist in system
Change-Id: Iec13bceed0db0db71655fdbf6f96df8795b5077b
Remove the global soc->peer_ref_mutex lock to protect
peer access
Instead use granular locks to protect the individual
peer DBs
1) soc→peer_hash_lock : To protect peer hash table
2) soc→peer_map_lock : To protect id to objmap array
3) vdev→peer_list_lock : To protect vdev level peer list
Change-Id: I9f044c4d71fe1155817a2b22a5a050545ec37445
Remove self and BSS peer back pointers and added APIs to
get self and BSS peer from VDEV
These new APIs will iterate through peer list and return
the appropriate peer by taking a reference
Caller has to take care of releasing the reference
Change-Id: I550ff83d665f3ad0a185bea1a1e6270c5474ff07
Allocate/Deallocated the peer extended object in the
peer_create() and peer_del() paths respectively.
Change-Id: I3e93e1ec85aefb22d3fb40d1b01bbd07d660aff5
Validate number of wds entries deleted during peer unmap
handling with the number which firmware has sent in
peer unmap message, which indicates the number of
wds ast entries deleted by firmware after peer delete.
Change-Id: I09e1c41bab19cd023e7a83baf1e90d51aab4229e
CRs-fixed: 2667445
The peer rx packets should be flushed when
deleting the peer and its state should be reset
to DISCONNECT, when deleting the peer.
If the state of peer is not set to DISCONNECT,
then the flushing of rx packets for the peer
which is being deleted will call the rx callback
and submit these packet to the stack, which can
cause unwanted behaviour.
This way the UMAC does not need to specifically
call clear peer before deleting the peer.
Change-Id: I3b5a737126350a361d968f6349aef6291b2e3f56
CRs-Fixed: 2659629
Is some cases, FW wants to adjust BA session parameters
FW sends a HTT event and HOST helps to send out DELBA
and modify BA win size in the next round of ADDBA req/resp
exchange to reduce following RX AMPDU aggr-size
Change-Id: I97777ff59a18346f2cd4e2e562c8ae6acdcd69d7
CRs-Fixed: 2644641
AST entry delete logic has some conditional checks making code with respect
to HTT V1 and V2 messages making it tough to follow.
Change-Id: I229324446134b32021a956fb689e4726256fcc28
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *peer mac address, uint8_t flow id
Output – uint16_t ast_index
Change-Id: I79557c31532514ad5ec0c1848827a3e5cd91cdf2
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
Memory leak fixed in dp_rx_tid_delete_wifi3 in the case
where update cmd send fails. Add the desc to the front of
free desc list and set a flag to ensure that the update
cmd is resent from delete rx_tid callback. In the same
callback ensure that the update cmd desc is sent out first
and then proceed to free other descs by sending out the
flush cache cmd for each of those descs.
If the flush cache cmd is not sent successfully to REO,
add the REO descriptor back to the free desc list and
defer the deletion to the callback function. This update
is made under MCL feature flag REO_DESC_DEFER_FREE.
Add a soc level stat to indicate the reo send cmd failures.
Change-Id: I4e4cf47223d5325a53f2df22571895489d033ba3
CRs-Fixed: 2551028
Do not log when we succeed to find the vdev for vdev_id.
Instead log only on failure.
Change-Id: I292839af763a77c2c5e75124b24accbee222d58f
CRs-Fixed: 2501696
Since tx_monitor mode and rx_monitor mode consume signficant MIPS
when enabled on a per-peer basis, new requirement is to enable such
functionality on a per-peer basis. New CDP APIs are added to set these
per-peer parameters.
CRs-Fixed: 2494471
Change-Id: Ib44845ec98481cc4df36c30f47335522e5274568
1. Remove vlan tag in tx and enqueue to hardware.
2. Add vlan tag in rx after peer-vlan_id lookup.
Change-Id: I932202540ac03cabdd20ffd4849fe759ea8a7abb
Add code to remove void pointer usage for hif_handle
and use opaque pointer hif_opaque_softc and also use
cdp_soc for opaque DP soc handle
Change-Id: I2896f7704ffb809214c5b08756c4b8673307fd9e
CRs-Fixed: 2487247
Add code to remove void pointer usage for dp_soc
and use original dp_soc structure inside htt_soc
Change-Id: Icdc26ecdb33d565c43dbc101584069808b31c1a0
CRs-Fixed: 2484403
Make change to remove usage of void pointers for
ctrl psoc in DP and instead use a opaque pointer
struct cdp_ctrl_objmgr_psoc.
Change-Id: I9fac21db1156378fc10b95cf10517afa4364da00
CRs-Fixed: 2484411
Add a CDP function which processes the peer delete response
and deletes the static ast entry for the peer
Change-Id: Id646979ed07bd82609ca08e7ef3201382d07b1de
CRs-fixed: 2385115
Currently there is not STA inactive time support for lithium.
Read inactive_time from htt_peer_stats_cmn_tlv by sending
HTT_DBG_EXT_STATS_PEER_INFO to firmware.
After sending command, wait on completion variable till
firmware to response, trigger completion upon firmware response.
CRs-Fixed: 2319219
Change-Id: I93e6343641ae5c72610a57dd6ba551cca0b010c1
