Event based mechanism to reduce delay by removing sleep
while getting response from firmware
Change-Id: I9d553764127efaf06794f41c81cf646cf9dc695e
CRs-Fixed: 3233643
Add support to track the high watermark for the number
of entries which are used at any given instant. This helps
in identifying if the ring size is sufficient or is being
full for certain use-cases.
Change-Id: Id3ffa52c653696699fbcfbb556a815d5f7908863
CRs-Fixed: 3235115
Add host support to display selfgen_be_stats,
selfgen_be_err_stats and tx_sounding_stats.
Change-Id: If6b6da59be609161537f1e3b28031ac3d029328b
CRs-Fixed: 3210158
With restructuring in HIF runtime PM module, modules are
required to register with the HIF runtime PM module. Also,
changes are done in functions of allowing and preventing
runtime PM suspend as part of restructuring.
This change registers DP, HTC and HAL internal modules
with runtime PM module and update HIF runtime PM function
calls with the restructured code of HIF runtime PM module.
Change-Id: I8899a1d3b92a90a05c5eaf4df7609f4008f739f8
CRs-Fixed: 3169372
NAPI scale factor should be configured based on the board
type. for example Hawkeye could have a different scale factor
compared to Alder.
CRs-Fixed: 3212330
Change-Id: Ie0bad6aade9ca9379997aa974154f9fb903ab93e
When user makes a request for stats using Link peer mac address,
then fetch per pkt stats from MLD peer for Link peer.
Change-Id: I64e0b10eaca82c87e7066d3ca1dbefad63a186a8
CRs-Fixed: 3208757
For telemetry agent, some more statistic support is required.
Hence, add support for telemetry agent required stats.
Change-Id: Ieb2210a4a5dfe6fa0a0dd46a85f2d9ae483bb746
CRs-Fixed: 3210797
Add ini support to configure TC ingress filter priority
value which would be used for TC based dynamic GRO.
Change-Id: I1742f4539353939e3a40ff4096b3f833f2029b12
CRs-Fixed: 3206817
Add cdp api to get accumulated pdev tid stats along with per tid
total tid rx and tx stats.
Change-Id: I7862c4265f199d0588d8865c5ed97e06010dd79f
CRs-Fixed: 3207499
Rate limit the log in non-TQM Tx completion path and add a counter
to increment whenever Tx completion status is received and release source
is non-TQM.
Change-Id: I8968ccc7a499577bd4fdfaef78e6520b00c12503
CRs-Fixed: 3201403
Add support to display tx/rx htt stats
related to SU Puncturing. The new stats
are su_punctured_modes, bw_ext
and mcs_ext_2.
Change-Id: I0260f7ea5fffa9206fff1052ef18b414c5de384b
CRs-Fixed: 3198040
Reo shared qref stats is not required for legacy platforms
and is enabled for wkk only. Hence add check in stats to
skip for legacy platform.
Change-Id: Ic6f1ebd965aa63b98a3ac6a5216fa9b4e3499b74
CRs-Fixed: 3186595
Per peer extended stats are maintained as a histogram having 10
delay buckets. Each packet will fall into one of these buckets as per the
delay calculated. These buckets are now increased to 13 as per requirement.
Change-Id: I7f9a01c21b748a0f589bb44e6f7dd69a1c5702a7
CRs-Fixed: 3163423
Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
As the value of min_delay is initialized to 0,
during the updation of min_delay per-packet,the
new value is compared with 0.This results in the
value of min_delay always becoming 0.Fix this by
initializing min_delay to very high value.
Change-Id: I6dfdd88a44f68d21240c148bd5c591e04fdff92e
CRs-Fixed: 3170996
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Add support to send unit test command to FW to dump
stats on suspend failure due to pending tx completions.
Change-Id: I6afb69a862c366c66a1e1f3dc009964272dfb75a
CRs-Fixed: 3151458
Update enhanced Tx stats from Tx HTT PPDU completion path in WKK.
Define and use function pointers for architecture specific
functionality.
Change-Id: I4ba443647dbd81c83e899c0f88c5d9a4cc695e14
CRs-Fixed: 3132255
Rate statistics are updated at both peer and vdev level in Tx HTT
and Rx monitor path.
As per peer optimization changes, macro DP_UPDATE_EXTD_STATS is used
for aggregation of extended stats and this macro is used for both peer
and vdev stats query.
With this approach, when user requests for vdev stats, then rate stats
for vdev are updated with the rate values of the last peer present in
peer list of vdev and this results in wrong output.
In order to fix this, add an API to update the rate stats for vdev
separately.
Change-Id: I546a130e84f7fd577b80ace24e1dbb71000c0698
CRs-Fixed: 3132195
check null pointer for soc return val and
check array index input for out of bound access.
Change-Id: Ib1d52f70128eaf9ba24e9024440490e470fec3d4
CRs-Fixed: 3127451
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Make changes in the APIs for printing of peer stats by passing
the buffer holding peer stats along with the peer.
Also define macros for peer stats aggregation as per the peer stats
re-organization architecture.
Change-Id: Ia03cdb145de7e7c3355463ac31313edd863dfd2b
CRs-Fixed: 3092123
Delay and jitter stats are placed in struct dp_txrx_peer.
Make changes accordingly for allocation, fetching and clearing
operations of these stats.
Change-Id: Ic9b9e48467741072806000f4d1b3aa8e5c65d508
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
Customer reported their HLOS LTE-WLAN transition algo sometimes go wrong
for wrong low layer stats, Txretry delta is bigger than Txtotal delta.
Txretry unit is msdu while Txtotal unit is mpdu.
Add vdev/peer stats for mpdu number of successfully transmitted after
more than one retransmission attempt, to align mpdu tx_packets, tx_failed.
CRs-Fixed: 3099490
Change-Id: Id4b9d8fd81af4bf0c141dad481bfd2b3f6c1db2a
For WCN7850, the first mac (i.e.. MAC0) is capable of
2G/5G and 6G data transfer. Hence initialize and use
only on RXDMA monitor status ring.
Change-Id: Idb6e23a887a9ed32a52dd54765e5ed3c6a12df06
CRs-Fixed: 3094138
WCN7850 has only one RXDMA DST ring, as opposed to other
lithium family chipsets, which had 2 RXDMA DST ring.
Refactor the code to pick the number of rxdma destination
rings from CFG context.
Change-Id: I20d475c02690043e969bc7a78605809b8c6814ae
CRs-Fixed: 3084440
Add function pointer and initialize with function
to update stats for WKK
Add new fields in structure cdp tx stats
CRs-Fixed: 3071271
Change-Id: Ib1fd867e414b8a61cff4f462434c51541f925f62
Refine dp pdev vdev stats updating function to non-inline to avoid kasan
building failure.
Change-Id: I896f28831198632c61735ccc10ed4aedb30a8232
CRs-Fixed: 3085365
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Dynamic GRO feature is enabled by default and aimed for specific
customers. Add an ini control to allow other customers to config
this feature enable/disable.
Change-Id: I7f505599327ac131b3cdac9b4d9e038861b1aeb6
CRs-Fixed: 3074689
Tid in RX frame header may be larger than MAX TID allowed
value, this will lead a out of boundary array access and
lead to kernel crash at last. Change is aimed to do a TID
check and discard such frame when necessary.
Change-Id: Ie9e7a1816d197d05cf845e81251ef7772721b849
CRs-Fixed: 3071743
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
Repurpose the IPA tx and tx completions rings for
normal use when IPA is disabled either via config
flag or ini.
Change-Id: Ia4b6a89c73d888a217bdef40e3c05435c3bb1bb2
CRs-Fixed: 3059730
Currently the IRQ mask for tx completion near full
interrupt is not in sync with the tx completion rings
which are enabled for WCN7850.
Fix the mask for tx completion near full interrupt.
Change-Id: I1432191b260094060873406d48e04fde5b7bc35e
CRs-Fixed: 3052650
