Send idle roam trigger monitor command to firmware based on
the SET SUSPEND mode command received from the user space.
The set suspend mode value sent will be used by firmware as
one of the parameters in determining if the device is in
idle state. When set suspend mode is 1, device is not in
idle state else the device is considered idle if idle state
data packet count, idle rssi, inactivity time criteria are met.
Add changes to send the suspend mode value over the wmi
command WMI_IDLE_TRIGGER_MONITOR_CMDID.
Change-Id: Ia4531fdab140334dbb830e0d7486db07bbdfc7e8
CRs-Fixed: 2436221
Change I1f668fff633a5e5cdfc478e7f619e9600930b333 ("qcacld-3.0: Use wma
callback to get vdev dp handle") removed the implementation of
pmo_ucfg_vdev_update_dp_handle(), but left behind the stub
implementation for use when PMO is disabled. This stub, since renamed
to ucfg_pmo_vdev_update_dp_handle(), is unused, so remove it.
Change-Id: I042ea081a4c2e5288963f7882129d06667e5b707
CRs-Fixed: 2380780
Update the PMO packet filter APIs to make sure the parameter names
in the prototypes match the ones in the implementations and in the
documentation.
Change-Id: I7fd924d17edb54c690e8ef5b85d4829a4a165edc
CRs-Fixed: 2379075
Based on new cfg framework, refactor below WNI and INI cfg items:
- WNI_CFG_PS_WOW_DATA_INACTIVITY_TIMEOUT
- g_wow_data_inactivity_timeout
- gDisablePacketFilter
Change-Id: I9a975263021ba4fd5ccea19ed1147a661f73317f
CRs-Fixed: 2375866
Currently if a vdev is destroyed, wow patterns are not
getting cleared for that vdev, so when a new vdev is
created, host tries to configure new wow patterns for
this new vdev but due to FW limitations on number of
wow patterns that can be maintained at FW, FW is not
able to act on this filter and will not maintain this
new wow filter.
To resolve this issue, clear the wow patterns for the
vdev before it gets destroyed.
Change-Id: Iae7ad8b683c95d8eaf11355bc0e36b91cece2202
CRs-Fixed: 2344337
To keep names of PMO ucfg APIs consistent, change some of them from
"pmo_ucfg_xxx" to "ucfg_pmo_xxx".
Change-Id: I77165be8c5c408c3f91f84a477c15be1c6ea15e8
CRs-Fixed: 2334109
Based on cfg component, define PMO configures and add APIs to get or
set configures.
Change-Id: I9b9ff1f8701168787985cbcb219361a3f63c787f
CRs-Fixed: 2322176
Add debugfs entry to get offload info (mc addr list, arp, ns etc.,)
for STA interface.
Change-Id: I8bf4491929b5ef04ed5ce19f4b0030945f0eb0c0
CRs-Fixed: 2203786
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2
num_packet_filter = Packet Filter enabled ? 12 : 0xffffffff
Change-Id: Ie8cb4ae44c83b115b249e22ebd7146278ed70612
CRs-Fixed: 2199297
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2 (pending firmware support)
pkt_filter_num = Packet Filter enabled ? 12 : 0 (disabled)
Change-Id: Ic6624ff04598b53d8321e4864618b12b9702780f
CRs-Fixed: 2196997
Provide PMO-specific device capabilities to PMO. This allows PMO to do
intersections between configuration and device capabilities.
Change-Id: If0a199f9be466d16cef900a29b14b73a2a4e52d0
CRs-Fixed: 2197828
Rename pmo_ucfg_* API to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I59491eff038709a883efb527168159a7e9e2ba2a
CRs-Fixed: 2145088
Change "qcacmn: Rename enum tQDF_ADAPTER_MODE" (qca-wifi-host-cmn
Change-Id I20f1b6d1a0ab4b8fe6a85cefdff96a49e2f4652c) renamed enum
tQDF_ADAPTER_MODE to QDF_OPMODE. Update all references to use the
new name.
Change-Id: Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f
CRs-Fixed: 2141065
Rename pmo_ucfg_* APIs to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I9fba71ee5d5cf6428f043c7d7782ef585951e059
CRs-Fixed: 2140474
Rename pmo_ucfg_is_vdev_connected to ucfg_pmo_is_vdev_connected
to match existing naming convention for component ucfg APIs.
Change-Id: Idd04103664135f226881b07263365d70df5790e0
CRs-Fixed: 2135888
Rename pmo_ucfg_is_ap_mode_supports_arp_ns to ucfg_pmo_*
to match existing naming convention for component ucfg APIs.
Change-Id: I6877e1ebbc8a89d9b2cfb08f7af46e3f3b6606f3
CRs-Fixed: 2135193
Checkpatch reported multiple instances of block comments not aligning
on "*" so fix them.
Change-Id: I082f62f59fe16d84ba013adbbfcd2e9bf1985e3c
CRs-Fixed: 2122901
Currently, a hard-coded enhanced multicast filter configuration is being
sent to firmware. Instead, create a set of enable/disable APIs, and
configure enhanced multicast filter based on advertised firmware
capability.
Change-Id: I488b4a921612e1081266be8831be098d755375f9
CRs-Fixed: 2078615
