Add peerstats application to display peer rate stats
of following types:
a. Tx rate stats
b. Rx rate stats
c. Tx sojourn stats
CRs-Fixed: 2397918
Change-Id: Icf319b7eb4a73c8421341390132de6b3b2de1494
we are seeing few error prints while registring
TX events per pdev. Ignore double registration
error during pdev init.
Change-Id: I185b1c9178a4632bd14b65314a623efee0597481
CRs-Fixed: 2414456
Convert pdev and vdev param conversion array to pointers
and allocate them only if conversion is required.Use run-time
NULL check of pdev and vdev param pointers for conversion
and remove CONFIG_MCL compiler flag.
Change-Id: If9c966f8306514ee981698ad9f90db38dd3c5aad
CRs-Fixed: 2393422
Agile Dynamic Frequency Selection refers to the mechanism in which DFS
scanning takes place on a separate dedicated synthesizer
(agile DFS sythesizer), while the access point is receiving data on a
separate channel. Once DFS scanning completes in the aDFS
synthesizer, AP can switch its primary channel to this preCAC done
channel, without having to do a Channel Availability Check of 60
seconds
Hawkeye has native support for A-DFS unlike Cascade, which uses a
dedicated radar detector for background scanning. Each radio has two
synthesizers, one of which can be used for A-DFS.
Host driver will configure an A-DFS channel along with maintaining
pre-CAC Done list of channels.
PreCAC list caching of channels is limited to ETSI domain.
Once off channel CAC completes in the agile channel, HOST receives
O-CAC complete indication. O-CAC status included as a apart of event
params has information if the preCAC is successful or not. If RADAR
is found on the agile channel, host receives indication through the
existing radar indication event. HOST identifies the detection as
agile channel radar using the detector id value.
For SBS mode, there can be 2 pdev's which can include DFS channels.
Although the preCAC list is maintained separate for each pdev,
preCAC can only be performed for a single pdev at a time.
This is implemented by making the host timer common
for both pdevs,i.e psoc level timer.
The following commands can be used to set/get preCAC enable,as long
regdomain is ETSI along with agile capability enabled in the target
advertised to host in WMI ready event.
iwpriv wifiX get_preCACEn
iwpriv wifiX preCACEn 0/1
Change-Id: Id8eaf7526942cbf01a9a62a2b109813624ae550f
CRs-Fixed: 2385536
Fix cfr stop wmi command and some other fixes checking for
sanity, error handling.
Change-Id: I9f0939fee2301f85e6e7b3338fd26e84676d7d6d
CRs-Fixed: 2407354
In current code, channel number is checked to enable multivdev restart
synchronization, this assumption is not valid as channel width change
can also be requested.
To fix this, used a flag to enable multivdev restart synchronization.
Change-Id: I30b766d4430e3ce98de29d6194dc43cc42bbf0f6
CRs-Fixed: 2400987
If user configures DFS channel in 160MHz mode,
1. change mode to 80MHz and do PreCAC on primary and
secondary channels of 160MHz.
2. Use intermediate channel to operate.
3. Once PreCAC done on the both primary and secondary channels and is clear
then change mode back to 160MHz.
4. Change the channel from intermediate to configured DFS channel.
Use Broadcast and Unicast OMN frame to notify mode change.
Change-Id: I451e35516ab4a44adea52a1342b5ea76d6e3d04f
CRs-fixed: 2395431
Add CFR component support for legacy chipsets including
the implementation of stream filesystem interfacing
Change-Id: Id92a4592425e901cc86061ae5eccefc5438efd45
CRs-Fixed: 2397716
Fix dependencies in WMI after changing
inconsistent naming followed for vdev id
for wmi_unified_param.h, these structures
are moved to converged mlme and will be
in use here on, which have these naming
convention inconsistency fixed
Change-Id: If6442e4325d2b5c21e8ce19809ad7c40b253c281
CRs-Fixed: 2391766
Add Channel Frequency Response component,
This provides dispatcher and core API that can
be used by other modules.
Change-Id: I032b312c6b88494756a21afb5a36179bceb2f214
CRs-Fixed: 2372061
This change removes QDF_BUG if channel match fails with other vdev,
prints would help to debug further on any issue.
Change-Id: I9566fe699d6124542dbb3075e470c887de1a612a
CRs-Fixed: 2391464
The function extract_pdev_qvit_event_non_tlv is defined but not used.
Remove the definition of this function to fix the compilation error.
Change-Id: Ibe573874e4deed571439c3807453405837436a58
CRs-Fixed: 2388461
Logs of the Spectral WMI interaction prints are under
OL_SPECTRAL_DEBUG_CONFIG_INTERACTIONS macro and is disabled by default.
As the WMI logs are already controllable at runtime from qdf_cv_lvl,
there is no need for OL_SPECTRAL_DEBUG_CONFIG_INTERACTIONS anymore.
Change-Id: I3b89192de4deb420d853631064c20add894fb1e3
CRs-Fixed: 2369846
Add CFR capture test application with streamfs APIs.
This is test application to read CFR dump from driver
Change-Id: I6925646678d1e87ecef2fb5405e992246a6d4eb4
CRs-Fixed: 2372061
Per the Linux coding style both mixed-case names and so-called
Hungarian notation are frowned upon, therefore replace the identifier
pAddPeriodicTxPtrnParams everywhere it occurs.
Change-Id: Id80fc4cd22a8e4af125f01b937e03eea0b898283
CRs-Fixed: 2371906
Per the Linux coding style both mixed-case names and so-called
Hungarian notation are frowned upon, therefore replace the identifier
pAddPeriodicTxPtrnParams everywhere it occurs.
Change-Id: Id80fc4cd22a8e4af125f01b937e03eea0b898283
CRs-Fixed: 2371906
Using both structure wmi_tdls_params and tdls_info if TDLS component
sets FW states, which will cause memory corruption potentially. Use
enum wmi_tdls_state as type of tdls state.
Change-Id: Ia1e78a5c6d8aee9ab5166c0704dd7827f42c2457
CRs-Fixed: 2372452
Using both structure wmi_tdls_params and tdls_info if TDLS component
sets FW states, which will cause memory corruption potentially. Use
enum wmi_tdls_state as type of tdls state.
Change-Id: Ia1e78a5c6d8aee9ab5166c0704dd7827f42c2457
CRs-Fixed: 2372452
