The kernel-doc script identified a large number of documentation
issues in dp/wifi3.0/dp_txrx_wds.[ch], so fix those issues. In
addition, there are a number of instances where public functions have
their implementation documented instead of having their interface
documented, so move that documentation.
Change-Id: I2f80d9715f772a59072f2c4158548f47df8bb055
CRs-Fixed: 3373164
To support WDS feature in IPA driver, WLAN needs
to update the ast entry for any new rx packet, and for
end-nodes connected via repeater to root.
CRs-Fixed: 3226348
Change-Id: I7383b12f18e7c70ec06499d66130667eca033131
The per packet info feature can be enbaled to support enhanced
stats independent of mesh mode.
Change-Id: I852e7a958c520901b6f418d30deb53fa2f68fb68
CRs-Fixed: 3079000
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
Do not populate the struct meta_hdr_s into for buffers received on
Tx completion path when operating in mesh mode.
Also update the fields in tx_capture_hdr as per the new definition.
Change-Id: I6150b4ce891ca73d5ed7c7620568606c377223c6
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
In case of aging out wds entries, avoid sending all
the wds delete wmi commands in a huge single burst.
Instead limit the maximum commands to half of the
wmi queue size. Inactivity will continue to be
marked every 120 secs but the inactive entries
will be flushed every 5 secs if there are pending
entries.
Change-Id: I6735704a0750ef466f1df798f0b354f4382098d6
CRs-Fixed: 2952682
Correct print format identifier to avoid compilation
errors with -no-format removed from compilation flags
Change-Id: I8806d1a2b31b30f4e0fcb492e462ac38c89c5b79
Low memory profiles like 256M and 16M profiles support
only NSS Wi-Fi offload mode and HOST data path APIs are
not used.
Disable HOST data path APIs which are not used in both
NSS Wi-Fi offload mode and in HOST mode (in NSS offload mode)
Change-Id: I44bcbf65771c131a839fb13906e9bbd59fd8545b
These two macros are obsolete and are being removed.
Therefore, replacing them with new macros:
QDF_MAC_ADDR_FMT and QDF_MAC_ADDR_REF
Change-Id: Iaefe71472638a12a1d7ae8fb728b14664e910cd2
Use dp_vdev_get_ref_by_id() to get vdev object from vdev id
array also call dp_vdev_unref_delete() API to release
reference held by dp_vdev_get_ref_by_id
Change-Id: Icd8fac503d46dc0a010c6911116d9243effee777
Function to notify HMWDS ast add status to upper layers via
newly added WDI event WDI_EVENT_HMWDS_AST_ADD_STATUS
Change-Id: Ib6fad7a48425ce7de16d94bb401af0c428c8e556
CRs-Fixed: 2745460
Hold peer_ref while adding peer to multipass_list
which will be released during the removal from the list.
Change-Id: I37ada3fd433dc9a8858dedb82dc9caee151fc88a
Enable vlan hardware acceleration support in Rx path
if multipass feature enabled.
It is expected for a packet to have vlan header in-placed
and vlan_id is padded with zero. If not, drop the frame with
proper error updation.
Update vlan_id if frame comes with special peer and has vlan
header in placed and vlan_id padded with 0.
Change-Id: Ife7a371dcca20634b0dc99f00cb02551dbff611f
CRs-Fixed: 2584007
Lithium HW can parse each MSDU when packets are enqueued to transmit
classifier and each MSDU can get enqueued to different MSDU-Queue.
By default, there are 2 queues per TID – UDP and NON-UDP. Based on
the flow parsing, packets will be queued to either of them.
Enterprise customers uses RAW mode frames which transmit classifier
would not be able to identify L4 protocol for UDP or NON-UDP queue
for encrypted frames.
Customer can also have different application based packets which needs
to be enqueued to differently prioritized queues. They can choose to
tag each MSDU based on application DPI and derive the flow priority
as below –
• UDP
• NON-UDP
• HI-PRIO
• LOW-PRIO
Customer needs API support from host which will provide an ast-index
based on a particular flow id given peer mac address. Based on the mac
address, host will find the associated peer and return the ast_index &
cache set number corresponding to the flow id from peer flow based ast
entry table. Customer will then program this ast-index and ast override
in transmit classifier CMD ring to enqueue MSDU to a specific
flow-queuein TQM.
Host API:
Input parameter – uint8_t *macaddress,uint8_t flowid,uint8_t tid
Output – uint16_t ast_index
Change-Id: I62b2308510ee7a43b153e125dc3bee6abbad0848
At present, there is not check while calling multipass processing
and hence no packet gets dropped.
Adding check will drop packet in case of returning return type as
false. Hence modified return type as true so that no packet gets
dropped and existing flow doesn't break.
Change-Id: I49089f155b1b78adb533ca23f3b0f3cad9543135
CRs-Fixed: 2599782
Equivalent changes in component dev data path APIs
implementation for changes in cmn_ops interface APIs.
Change-Id: I1d9c43607bfa699dded771fe9aea87f4ec5a70b9
Duplicate vlan tagged frames which need to be sent to repeater should
have unique check to avoid infinite iteration. Infinite iteration leads
to creation of nbuf every time loop is executed.
Change-Id: I2601461edc9e144f1058ed031ba14410563d0755
1. Remove vlan tag in tx and enqueue to hardware.
2. Add vlan tag in rx after peer-vlan_id lookup.
Change-Id: I37c34b1d54a497700101e78ad6930b91aa6b43e9
dp_tx_mec_handleri,dp_rx_wds_add_or_update_ast,
dp_rx_wds_srcport_learn were changed inside common dp.
As part of cleanup we have moved it to component
dev.This change adopts to the latest dp_tx_mec_handler version.
With this change we are moving dp_peer_teardown_wifi3 to common code as
it is also required by MCL driver code.
Change-Id: Ieba59ceb2f3a3b21f3588fe2685e0dc720ee049a
