Add soft links to .qca6174 and .qcn7605 so the latest code
can be compiled with rome and genoa chipsets.
Change-Id: I364b38d7f285c2148f78a915616fcc602b3b47f7
CRs-Fixed: 2912418
Add support to reject TWT setup request if received when the below
mentioned concurrency scenario exists.
STA + SAP: SCC or MCC: Reject TWT setup
STA + P2P: SCC or MCC: Reject TWT setup
Change-Id: I5c4c2bcc032276a0b83b7a46a44dbf7933cda29f
CRs-Fixed: 2923726
Currently in packet capture mode for tx mgmt packets tsf_delta
filled in tsf timeestamp, which is incorrect.
So, fill tsf timestamp in Mgmt tx packets for packet capture.
Change-Id: I90da072ee6d7e0f7a9b6271086e163a71208b7f5
CRs-Fixed: 2916982
There is excessive logging in wma_wake_event_packet that does not
add much value in debugging. Hence, remove it entirely from the code.
Change-Id: If0ea6d9ea33d741f734ccf14ad3d1f1b4e261dd0
CRs-Fixed: 2923733
There is a compilation error due to use of PMO_ACTION_BLKACK, which
is not defined. Change PMO_ACTION_BLKACK to PMO_MAC_ACTION_BLKACK to
resolve this issue.
Change-Id: I011c4c323bfa7d104c6a6879aba93085a35fed3d
CRs-Fixed: 2923577
With the changes introduced in
Change-Id: I91e87ffa32d77e2bab15fca09514cdefb1075c71
Change-Id: Ie6579d1ed34de2c183f9ce2d411a02d6c8137da5
wlan chipset's device id won't be available in
pld_pcie_id_table unless a chip specific macro is defined;
and cnss2 will do strict device id matching after wlan
driver registers to it.
This has been a problem for rome on auto platforms because
there has been no chip specific macro defined in its
defconfig file(qca6174_defconfig).
Add rome specific macro into qca6174_defconfig to make sure
wlan driver exports the correct device id when registering
to cnss2 driver on msm-5.4, so cnss2 device id check can
be passed and wlan driver init doesn't fail.
Change-Id: Idd7a86380613b9f624cfa6e4574d40065e85a221
CRs-Fixed: 2907268
If STA connection is in 11b mode and TDLS connect in HE, the
phymoe is not calculated properly.
Handle the HE mode in 11b network type as well.
Change-Id: I0ddafa0b4be8d6eab02c66be7c0f909c2d968918
CRs-Fixed: 2923182
It enabled two pipes for IPA DBS case on SDX65, and froce wake
doesn't support this case. So disable it on this platform.
Change-Id: Ie8a23f11a5cd089b205c5b6ec27c39a9da9ddad9
CRs-Fixed: 2901043
On reception of vendor specific action frames, host performs basic sanity
on vendor specific action frames fields and then forwards to supplicant.
Change-Id: Ib22b9a431411fff8128e461972b81b66688a0919
CRs-Fixed: 2897656
If firmware sends the TWT teardown due to concurrent session is
established, then the wait for notify flag is not set. So other
commands can be sent to firmware.
In case of TWT teardown due to concurrency, set the wait for
notify flag.
Change-Id: Ia1d5134e1c6d931f8c5ced1c011efb3489d343ad
CRs-Fixed: 2919799
Use wlan_reg_chan_has_dfs_attribute_for_freq API to check DFS
attribute flag instead of unused wlan_reg_chan_has_dfs_attribute
API as part of regulatory clean-up effort.
Change-Id: I7ff75f56ebd641d500c365f756526b787986dcbe
CRs-Fixed: 2908159
Currently Kbuild handles WLAN_CONFIG_OVERRIDE directives by writing
the overrides into a file and then including the file. This violates
one of the requirements of the Hermetic Build feature which forbids
modifying the source directory. This is also subject to a race
condition where multiple concurrent builds attempt to write to the
file in parallel, and one of the builds ends up consuming the
overrides from both builds.
To avoid these issues update the WLAN_CFG_OVERRIDE handling to no
longer use a file, but to instead just $(eval) the overrides.
Change-Id: Iac159228a82b0a8134e272ce63ed568050e8e6ae
CRs-Fixed: 2917351
Add support to reject the TWT setup request if there exists
another TWT session with different dialog id.
Change-Id: I59c0ba4279581bad14bec886d22c0ac65838ec17
CRs-Fixed: 2920494
Currently, mlme_twt_is_command_in_progress() function checks if the given
command is in progress or not. For inputs like WLAN_TWT_ANY, if this function
returns true then from the current logs, its not known which
active command in progress.
Hence for better debugging, enhance this function to return active command.
Change-Id: Ibc5c5babb042408b0e8988fe229d344ed98bfff3
CRs-Fixed: 2920494
As part of 11be enhancements, EHT operation and EHT capability
information elements were added. To support 11be in host driver,
define new APIs to handle these information elements in lim layer.
Change-Id: If615251cf874902263fe3c4faaf924fc9a3d9e23
CRs-Fixed: 2907952
As part of 11be enhancements, new information elements were added to
advertise the EHT capabilities in management frames. current driver
implementation supports generation and parsing of information
elements only till 11ax. Update the driver implementation to support
generation and parsing of information elements corresponding to EHT.
Change-Id: I3fd4067dc830b9fb5d603ae119fbb7ec6cfebe4e
CRs-Fixed: 2906976
The global aggregation size is only set to firmware once
when vdev is created. And the size may be modified
dynamically for a specified AP during association, according
to the OUI based aggregation size configured by ini
'cfg_tx_iot_aggr'.
If global AMSDU size is 0, considering the case as below:
1. connect to AP-1 which is included in 'cfg_tx_iot_aggr',
the AMSDU size will be set to the specifed value.
2. connect to AP-2 which is NOT in 'cfg_tx_iot_aggr',
it doesn't reset the AMSDU size to 0, and firmware is
still using the value set in step #1, it's wrong.
To fix this issue, set the global size for each vdev start,
as init values for each connection.
Change-Id: I790d580fc5762e6816e840ba5484b3cd758334df
CRs-Fixed: 2918046
KERNEL_SUPPORTS_NESTED_COMPOSITES := y is used to enable nested
composite support. The nested composite support is available in some
MSM kernels, and is available in all GKI kernels beginning with
5.10.20, but unfortunately is not available in any upstream kernel.
When the feature is present in an MSM kernel, the flag is explicitly
set in the kernel sources. When a GKI kernel is used, there isn't a
flag set in the sources. Therefore add logic to set the flag if we are
building with GKI kernel 5.10.20 or greater.
Change-Id: I13cd1a07915e9d187da22259cc61d9481e908e79
CRs-Fixed: 2914541
check if runtime pm enabled in wlan_hdd_runtime_resume
and wlan_hdd_runtime_suspend.
Change-Id: I107f953d19ea6078d8bb8a59d51dcac6736ff914
CRs-Fixed: 2920169
Update comments for temp change done to enable connection mgr, as
CONFIG_CM_ENABLE will be removed once Connection manager
LFR2 changes are done.
Change-Id: I22bc1f3f9fe5a69206ac496e99a60beb87dc1e36
CRs-Fixed: 2921657
As part of WiFi ini clean-up FR, the ini gReorderOffloadSupported,
is identified as an obsolete parameter. Hence it is deprecated and
all instances of the config CFG_DP_REORDER_OFFLOAD_SUPPORT is
replaced by default value of ini.
Change-Id: I738406fb740f414fb6ad70603dfc95b9bf137ac4
CRs-Fixed: 2916527
Extract the 11BE flags advertised by FW in WMI_SERVICE_READY_EXT2_EVENTID
and update the regulatory pdev wireless modes. The wireless mode is
currently represented as 'uint32_t' and all the 32 bits are exhausted.
To accommodate the new 11BE flags, change the data type of wireless_modes
from 'uint32_t' to 'uint64_t'.
Change-Id: I9c137fe4c3d6f28cf0b4e0dcb0ea5aae01b1749e
CRs-Fixed: 2906216
HSP doesn't support TX_AGGREGATION_SIZE ini, need disable it to avoid
confusing.
Change-Id: I9e49ad5218f913f116cf4472f768f572740f14df
CRs-Fixed: 2918796
Currently if STA is connected to HT only AP and if BW change
due to OBSS scan the htSupportedChannelWidthSet is not updated
and thus TDLS peer which use htSupportedChannelWidthSet to get
BW may not consider the vdev BW for HT and thus peer's BW can
go beyond VDEV's BW.
Fix this by updating htSupportedChannelWidthSet on vdev restart
on HT BW change
Change-Id: I7253fd240206ec27eac3e2b1de8debf8705a8234
CRs-Fixed: 2920539
In the current implementation of the function
__wlan_hdd_cfg80211_set_wifi_test_config, if the status returned by
get_cfg API is not Success, it returns from the function without
freeing the allocated memory. This causes a potential memory leak.
To avoid this, free the allocated memory properly.
Change-Id: I5f9ac5f2edc49ebad662f18dbe09893f8bee6459
CRs-Fixed: 2918850
Refactor the code to replace htt tx data header with packet capture
header. So that we can add extra parameters in packet capture
header to send required data to packet capture callback function.
Change-Id: I863c63b925d1cd8ba5a8a7f0bc08ee3cd2acb96b
CRs-Fixed: 2916795
