After NOL timeout, if ETSI PreCAC is supported, add the HT20 Channel
to ETSI PreCAC Required List.
Change-Id: I45812d0f7a9dd20e4fb1f03e6a71548ff2f6e5b4
CRs-Fixed: 2403489
With this feature, using appropriate commands, link layer, network layer,
transport layer and some of the application protocols can be tagged with
the user provided tag values for easier identification of protocols. The
supported protocols today are as follows.
ARP, DHCPv4, DHCPv6, DNS over TCP (v4), DNS over TCP (v6), DNS over UDP
(v4), DNS over UDP (v6), ICMPv4, ICMPv6, TCPv4, TCPv6, UDPv4,
UDPv6, IPv4, IPv6, EAP.
Receive packets are tagged by hardware. Tags are applied after the first
matching rule. Hence it is recommended that the rules are
programmed in such a way that tags are configured from application layer
to data link layer to get expected results.
Change-Id: Idd47cbab5882cef4530a19c0d96f52f9a47de6d4
Rate index zero (representing 11 Mbps in ratetable) was ignored in current
stats implementation. Added code changes to include zero rate index
Some formatting is done in peerstats app to avoid exceeding 80 chars
CRs-Fixed: 2424176
Change-Id: I9d6938cc840ee3db3639b3608b429a97832c3168
When a channel is marked as radar detected and added to preCAC NOL
list, it is removed only from etsi precac done list, but not from etsi
precac required list. Since a channel that is part of NOL, cannot also be
a part of etsi precac required list, this needs to be corrected.
Therefore, once radar is detected on a channel, remove it from both etsi
precac required list and etsi precac done list.
Change-Id: I4d809a24acd4b73db254790e2698ffc5414cf0fe
CRs-Fixed: 2403489
Two fields got swapped while polulating csi_cfr_header and
a field was missed. Corret and add missing fields.
CRs-Fixed: 2421237, 2421241, 2421209
Change-Id: Ife8ebc663292af021cc4556985c088092509b339
Currently, for restart response cases, if Restart is not in progress and if
stop is issued, VDEV SM is allowing Stop request to send to FW.
This fix would prevent such cases.
Change-Id: I0d4d74c5eb2a9c9bbb588f7114fbbd5611c37cd5
CRs-Fixed: 2400987
DBR event handler needs parameters to config number of events to
be packed and timeout until it can wait to pack these events.
Add these parameters in CFR's DBR event registration.
CRs-Fixed: 2415489
Change-Id: Id417221f3bebef40b8f8d75c0365c3c4ec01fec3
Add peerstats application to display peer rate stats
of following types:
a. Tx rate stats
b. Rx rate stats
c. Tx sojourn stats
CRs-Fixed: 2397918
Change-Id: Icf319b7eb4a73c8421341390132de6b3b2de1494
Define cache module code required for RDK-B statistics :
a. Objects to maintain tx and rx rate related statistics
b. Interface objects to be use by dp while pushing stats to module
c. Northbound interaction specific IOCTL structures/enums
d. WDI handlers for southbound interaction from dp to stats module.
CRs-Fixed: 2407888
Change-Id: I50b1461bc415e957d224bb1ec56e5e94cd833c27
we are seeing few error prints while registring
TX events per pdev. Ignore double registration
error during pdev init.
Change-Id: I185b1c9178a4632bd14b65314a623efee0597481
CRs-Fixed: 2414456
Convert pdev and vdev param conversion array to pointers
and allocate them only if conversion is required.Use run-time
NULL check of pdev and vdev param pointers for conversion
and remove CONFIG_MCL compiler flag.
Change-Id: If9c966f8306514ee981698ad9f90db38dd3c5aad
CRs-Fixed: 2393422
Agile Dynamic Frequency Selection refers to the mechanism in which DFS
scanning takes place on a separate dedicated synthesizer
(agile DFS sythesizer), while the access point is receiving data on a
separate channel. Once DFS scanning completes in the aDFS
synthesizer, AP can switch its primary channel to this preCAC done
channel, without having to do a Channel Availability Check of 60
seconds
Hawkeye has native support for A-DFS unlike Cascade, which uses a
dedicated radar detector for background scanning. Each radio has two
synthesizers, one of which can be used for A-DFS.
Host driver will configure an A-DFS channel along with maintaining
pre-CAC Done list of channels.
PreCAC list caching of channels is limited to ETSI domain.
Once off channel CAC completes in the agile channel, HOST receives
O-CAC complete indication. O-CAC status included as a apart of event
params has information if the preCAC is successful or not. If RADAR
is found on the agile channel, host receives indication through the
existing radar indication event. HOST identifies the detection as
agile channel radar using the detector id value.
For SBS mode, there can be 2 pdev's which can include DFS channels.
Although the preCAC list is maintained separate for each pdev,
preCAC can only be performed for a single pdev at a time.
This is implemented by making the host timer common
for both pdevs,i.e psoc level timer.
The following commands can be used to set/get preCAC enable,as long
regdomain is ETSI along with agile capability enabled in the target
advertised to host in WMI ready event.
iwpriv wifiX get_preCACEn
iwpriv wifiX preCACEn 0/1
Change-Id: Id8eaf7526942cbf01a9a62a2b109813624ae550f
CRs-Fixed: 2385536
Fix cfr stop wmi command and some other fixes checking for
sanity, error handling.
Change-Id: I9f0939fee2301f85e6e7b3338fd26e84676d7d6d
CRs-Fixed: 2407354
In current code, channel number is checked to enable multivdev restart
synchronization, this assumption is not valid as channel width change
can also be requested.
To fix this, used a flag to enable multivdev restart synchronization.
Change-Id: I30b766d4430e3ce98de29d6194dc43cc42bbf0f6
CRs-Fixed: 2400987
