During dp_vdev_flush_peers after peer unamp ref_cnt
for peer is set to 1. Which in case if peer unamp
for MLD peer is called before link peers from dp_vdev_flush_peers,
it will result in MLD peer delete before link peer.
To avoid MLD peer delete before Link peer, after peer unmap
in dp_vdev_flush_peers do not explicitly set ref_cnt as 1
for MLD peer.
Change-Id: If7ab63eb213dc482205f3847f0b32e246ca76d51
CRs-Fixed: 3585860
In the case of STA mode, will be marking bss peer as part of
peer map events during the creation.
Due to this create event will be triggered during the peer creation
as bss flag is not set and there won't be any peer delete event
to bss peer resulting stale entries in mld hash.
Hence will be avoiding creation and deletion events.
Change-Id: I15a78ad0b8a90b34505880af94522abbe1de8fb5
CRs-Fixed: 3581548
monitor peer is not allocated for MLO MLD peer this lead to drop in
broadcast and multicast frame in legacy tx monitor path. Added support
to enable monitor peer for all peer.
Change-Id: I786554a918bae966a929e4c9188c1b0f324b5846
CRs-Fixed: 3544695
As the bss peer is closely tied with the vdev creation
and deletion, listeners might be uninitialized and result
race conditions. send an event only to the connected peers.
Change-Id: Ia0ae063c92bba38d2fb67fe4eae84f5562991fa2
CRs-Fixed: 3574176
Two SMMU issues are seen on IPA domain with regard to RX.
1. map without unmap
2. Buffers not mapped into IPA.
With If198a6c5f22af58fdaf9d9c020c74b1f76002e37, mapping
RX buffers to IPA domain are deferred to IPA enable pipes
phase with soc->ipa_mapped flag check added. This leads
to a race window where RX packets are routed to WLAN Host
first with soc->ipa_mapped still being 0. In such case, RX
buffers handled by WLAN driver will neither unmap from IPA
domain nor map into IPA domain.
For !ipa_config_is_opt_wifi_dp_enabled(), fix is to set
soc->ipa_mapped to 1 earlier in soc attach phase instead of
IPA enable pipes phase. With this fix, RX buffers can be unmapped
from IPA domain and mapped to IPA domain in dp_pdev_rx_buffers_attach()
and dp_pdev_nbuf_alloc_and_map_replenish() in WLAN host RX path so
as to avoid above two SMMU issues.
Change-Id: Idcb86db99f522959b639865f77178cd47a234277
CRs-Fixed: 3560191
Add INI to disable AST indication. AST disable flag will be
sent to the target in resource config.
Change-Id: If30cac010681faf06bbcaa2d492d6843e3e675d0
CRs-Fixed: 3544223
Current HAL delayed reg write is tied to SRNG notions, hence
implement delayed reg write logic in HIF since WCN6450 does
not use SRNG interface.
New feature flag FEATURE_HIF_DELAYED_REG_WRITE is introduced
to disable/enable this support.
Change-Id: Id7087ad53cd5879cf49ee0e84dd727de61137541
CRs-Fixed: 3519702
When the peer delete timer/vdev manager response timer expires, host checks
if the umac reset is in progress. If so, host will retrigger the timer.
It is possible that the umac reset is just completed and either of these
two timers got expired. In this case, host will assert saying that the peer
delete response/vdev manager response is not received from FW. FW may take
a few milliseconds to send the peer delete/vdev manager response to the
host after the umac recovery completes.
Hence, to avoid the crash, check if the umac reset was in progress during
the umac reset buffer window.
Add the below changes as well,
1) INI support to get the umac reset buffer window value.
2) Renamed the API dp_umac_reset_is_inprogress as
dp_get_umac_reset_in_progress_state to return either
CDP_UMAC_RESET_IN_PROGRESS or
CDP_UMAC_RESET_IN_PROGRESS_DURING_BUFFER_WINDOW.
Change-Id: Ie15ef0731bad4b0ed955a479f00e297b7ba10729
CRs-Fixed: 3522665
Change number of packets datatype to unsigned 64bit and handle
respective print message changes.
Change-Id: I65e1ae90985b7d2fb29ea57f8034f5858491dae1
CRs-Fixed: 3534513
Currently, IPA SMMU map/unmap is called as part
of init. This causes every nbuf to be mapped
to IPA in the Rx path, causing throughputs
to drop. This change resolves the problem by
deferring the IPA SMMU map/unmap
call to OPT_DP filter reserve/release, as
nbuf needs to be mapped to IPA only in this scenario.
Change-Id: If198a6c5f22af58fdaf9d9c020c74b1f76002e37
CRs-Fixed: 3496679
Trigger the STA primary umac update event to umac
to handle downgrade scenarios.
Change-Id: I510d3d4443a978a8e2112f7372d0d1a03a508d18
CRs-Fixed: 3540314
Fix the peer authentication for wds client, in SDX_WKK
wds client needs to get authenticate when packets receive
from exception path as wds client is not directly associated,
authentication is done by verifying from ast table
Change-Id: I93051d67fc3d5be0af9242e6579f44883b3f757d
CRs-Fixed: 3534370
Currently in monitor mode, links are released to WBM through the
SW2WBM_RELEASE ring and WBM will feed the links back to RXDMA
through the WBM2RXDMA_LINK_RING.
WCN6450 uses SOFTUMAC architecture where WBM is not present.
Hence the WBM2RXDMA_LINK_RING is repurposed to SW2RXDMA_LINK_RING
where host will directly release the links to RXDMA using this ring.
Change-Id: I110f607e38c4c2ab10eb1bd7b1f5a7bce2f03692
CRs-Fixed: 3493368
add multiple history array to keep track of mem allocation and
deallocation for qref table.
Change-Id: I9fa97fbe5a5c36509cbb5a458851a152200318a5
CRs-Fixed: 3475981
Currently there is a self peer created for a
vdev created in station mode, which is not necessary
for kiwi target.
Add support to disable self peer creation
for vdev.
Change-Id: Ib9d63aef392be66bd0675960a0abfc73c6462d2c
CRs-Fixed: 3517791
Currently connectivity logging is done for all opmode
but logging should be done only for STA mode.
So to fix the issue add check for opmode and skip
connectivity logging if opmode is not STA
Change-Id: Ie6175a02c8167f5ebfd81553837206640431f701
CRs-Fixed: 3515365
During the mode0 target recovery cleanup the link peers
before ml peer deletion.
Change-Id: Ie0037056c2b44f50a64787fa75b5c2d8690e4224
CRs-Fixed: 3515517
Add soc/pdev level cdp config params, so that these can be used
to get and set config context items.
Change-Id: I6cfeafb4333bf2f267121dce37b64f22cb86e98c
CRs-Fixed: 3502588
In some mode txrx_stats can't be cleared completely such as NDP.
we need to iterate each vdev and clear their tx/rx stats.
Change-Id: Iab45742dbe914b7354ad5593d7ee14b9e109cef6
CRs-Fixed: 3475177
Move prealloc DP descriptor types to QDF so that
the macros can be used in HIF layer.
Change-Id: I3de60876735e5aa37d80e9e698a86503b18574c1
CRs-Fixed: 3502615
1. Add ini configuration for enabling round robin flows to
core distribution in FSE
2. Register FSE APIs to CDP FSE ops
Change-Id: Ic61c44eb9bc68a8c1a0116d4e6aa1d54cf489b62
CRs-Fixed: 3505287
1. Adding cmn dev APIs to support FSE block rule add from
ECM for SFE UL flows
2. Send SFE flows to stack post FSE match
Change-Id: I37563592a03e28373ef3e2520a771082c629ccf5
CRs-Fixed: 3499382
Logs without meaningful message or values serves no purpose in debugging.
Hence, add more context to the logs.
Change-Id: Ia463d239a9bf26f292a11bcc71cb1379374c45e4
CRs-Fixed: 3492593
