Add support to record last busy events on RX CEs,
this helps to check how frequent CEs are marking busy.
Add support to display last busy history and runtimepm stats.
Change-Id: I856ce54a2f1c6b26722d27623343fc0a2c202c6f
CRs-Fixed: 3337902
Store ini config delay value and current delay value in RTPM
context
Export API to update delay and get current delay in ms for RTPM
timeout.
Export API to restore delay to default value.
Change-Id: I53e9e17d983c2cc6fe317159c8c46d792e56c04e
CRs-Fixed: 3332132
The MSI address and data information for Direct Link
copy engines will be available once the WiFi driver
on LPASS is initialized. Add support to configure the
IPCC address and data values into Direct Link copy
engines at runtime.
Change-Id: I5e7dff90c2f1ff764462c235deb5795ed019a16b
CRs-Fixed: 3316679
1. Changes to support cmem write for AHB devices.
2. Interrupt enablement issue - Incorrect CE address was given which is
fixed.
3. dp_soc_init failure - dev_base_addr of Miami was NULL, which is
fixed.
4. Missing interrupt error logs - Added dummy entires for missing
interrupt in DTS and changes to support shared IRQ in wifi-drivers
Change-Id: I00e7666b2b978c35b5ccec5da21bf442ed0a7998
CRs-Fixed: 3268936
Throughput based RTPM logic of ring access may fail and
lead to NOC error in some corner cases. Change is aimed
to add additional link states check to prevent invalid SRNG
access.
Change-Id: I7e7edbadfd21b4857efa4faff0ada6d94d682f2c
CRs-Fixed: 3256702
Add provision to call sync prevent suspend which will wait for
system to resume and increment usage_count before returning.
Change-Id: I855e3fc2660dc7f3f78bb70f8eef6228cbef96d3
CRs-Fixed: 3253335
Added new file specific to qcn9224 v1 defs. Use qcn9224defs.c for v2.
Added changes specific to soc version check.
Change-Id: I5b6aedbb8aba2de847e0f4d47212a25b36bfa7c8
CRs-Fixed: 3243676
Add support to log latest CE descriptor history which helps
to identify CE scheduling/reaping delays when full debug
history dump is not available.
Change-Id: I44a5c86a3e1dd4861bfd2e77b3f772d5d53bcedf
CRs-Fixed: 3225155
If there is no resourse to send packet via HTC, then check if interrupts
are not processed from that CE for last 3 seconds. If so, schedule a
tasklet to reap available entries. Also if Queue has reached 1024 entries
within 3 seconds, then also schedule tasklet.
This change is added because there is a case where intermittently
completion interrupts are not received from CE3 and hence adding
this WAR in host to come out of this issue scenario.
Change-Id: I126cd5e678517127659237308f8f6b1313f8f422
CRs-Fixed: 3234943
Create a HIF context for UMAC reset handler, register the datapath UMAC HW
reset callback handler with HIF layer, request for UMAC HW reset interrupt,
and schedule a high priority tasklet to process the interrupt in which
call the registered DP callback handler.
CRs-Fixed: 3184312
Change-Id: Iefc811bf0d1b093c3c63bf2238c94a1448f4f139
Currently, different modules had different ways of allowing
and preventing runtime suspend. Multiple debug mechanisms
were introduced and workarounds are present as well bloating
the runtime PM module.
This change is done to clean up and restructure HIF runtime
PM module. Modules using Runtime PM module need to register
with an ID present in hif_rtpm_client_id.
hif_rtpm_get() will increment the device usage_count and
prevent device from suspending. Based on argument type, if
system is suspended, subsequent resume action will be done.
hif_rtpm_put() will decrement the usage_count of device and
if it is NULL, based on type of put call, idle sequence will
start. Register HIF module and update respective get and put
calls done from HIF module.
Change-Id: I23747f0f7208e689c1c9eb55789aa81945f596ec
CRs-Fixed: 3169272
As dynamic allocation occupy cnss prealloc memory, which may
cause this prealloc pool to be exhausted.
Move dynamic memory to static.
Change-Id: Ia3500868cbcdbd9676f72a3588462ab0d6a21088
CRs-Fixed: 3171015
Currently if write non-shadow register and not in initial
phase, host will call hif_force_wake_request()-->
pld_force_wake_request_sync(), but this API can not guarantee
MHI/PCIe is in wake state if runtime PM suspending is ongoing
in parallel, later any register accessing through PCIe bus will hit
NOC error.
Add hif_pm_runtime_get_sync() in hif_force_wake_request() to prevent
runtime PM suspending.
Change-Id: Id60c6041a830d9ad27b0b4173a036c9c57fbf350
CRs-Fixed: 3120170
Add Legacy interrupt changes for Beryllium target. Added code to initialize
legacy interrupt for Copy engines and also to request irq for hif group.
Change-Id: Idb5635d376b9dfcf1e4c595a829d7bef467870b4
Align the string entries inside the rtpm_string_from_dbgid()
function in the order of wlan_rtpm_dbgid enum entries.
Change-Id: I455e93723f5df882babb758a4979d1b1cecd8e7e
CRs-Fixed: 3128352
Different targets can have different WMI endpoint count. Add an API to
get this count from the target service map. This API can be used to get
max WMI ep count for a target to perform endpoint connect request only
till possible count.
Change-Id: Id90bcadfb23fbff12d10bf8b6ca825142d3f1bdc
CRs-Fixed: 3121598
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
Current there is no ce debug history when testing
perf build, so it is hard to debug some issue.
Here it only enable ce2/ce3 on perf build, which keep
only necessary log here.
Change-Id: I29b998939cfa25f0547a9871721c6daeb0fdd961
CRs-Fixed: 3058740
Add HIF events to track NAPI POLL exit time, this gives
information about actual time spent by wlan host in napi softirq.
Change-Id: I7548fd05f2f7db714ac9bcf79171ffb3d478e936
CRs-Fixed: 3052902
Current it use __RET_IP to get caller in rtpm resume
function, if it print info by %ps, it will do a
symbol lookup which takes time.
Change as replacing __RET_IP with rtpm_dbgid, so it is
still able to get caller information and avoid time
cost here.
Change-Id: Ifc70c118d621bb9e6d12de87582de09316ae9cad
CRs-Fixed: 3001690
Based on the bitmap whether the issue is because of the
HIF_DETECT_TASKLET or HIF_DETECT_CREDIT, the hif_latency detection
code needs to be refactor to different functions so that it will
help parsing tools to find the reason of crash.
Change-Id: I2d8a83493354dfbd1c484cb7727018ddeb14c158
CRs-Fixed: 2929736
IPA and rx_err ring are processed in same CPU resulting
in low Tput.
To fix this, not allow processing of rx_err ring in
CPU 0
Change-Id: Id53a03c9290607beb1a595c84bfb0fd8d9f5d105
CRs-Fixed: 2949569
After reg work is complete there is possiblity EP vote reset
request still not processed by F.W. So wait till EP vote reset
is done after reg work completion.
Change-Id: I1f4e318ac96ba3a15c613c5faf5095d4be7c8e99
CRs-Fixed: 2994233
Add api to set intermediate EP vote access state.
Make sure reg work handler is complete before setting
intermediate vote access.
Change-Id: Ib229d9af8b1e58505a9ae5fbf39aa912ca21a3c3
CRs-Fixed: 2994040
WCN7850 has support for near full indication for
the consumer srngs. This interrupt is used to take
preventive actions to avoid ring full watchdog irq
trigger.
Register for the near full irq and add the necessary
ext groups for these near-full irqs.
Change-Id: Ic16381fceabc54e6c52b34dd13abea74cad4d38c
CRs-Fixed: 2965081
Introduce intermediate EP voting state during this transition state
access the votes only if direct writes are not possible.
Change-Id: Ib4522aef2209b4797100ca84e4e230a00e14b654
CRs-Fixed: 2954903
As per current design, in failure path of hdd_wlan_start_modules,
mem_free of hif_ext_group is done (in cds_dp_close) before
free_irq (in hdd_hif_close), during next hdd_wlan_start_modules,
request_irq adds new handler entry to the list in irq_desc, this
leads to a crash on accessing older stale entry from irq handler,
so adding a bus_ops hif_grp_irq_deconfigure to free ext grp IRQs.
Change-Id: I4d0a2bee1fabee388cea8a85226fae641165a8d5
CRs-Fixed: 2949400
Runtime PM for HTC layer has multiple cases of GET/PUT operations.
Adding runtime PM stats for HTC layer, this helps in debugging
RTPM GET/PUT out of sync issues.
Change-Id: Ib27efd73dce0bb5bd3ff030bd7ae1bc833f29610
CRs-Fixed: 2923250
DHCP packet is received in the IPA exception path when
system is suspending. As part of DHCP packet processing,
WMI_PEER_SET_PARAM_CMDID is sent to FW after WOW is
enabled resulting in self recovery getting triggered by
host.
Fix is to do an explicit system wakeup if a WMI command
has to be sent post WOW enablement.
Change-Id: If1904a4fe5c861deed1b35071be10cb8cc8d6407
CRs-Fixed: 2890913
This feature is used to detect CE tasklet scheduling delay
and credit response delay issues.
Change-Id: I9a8fcb425edd5cf96fae5f6cd3bfc7f51172c814
CRs-Fixed: 2874874
Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. It is recommended to disable
EXT grp irqs and drain TXRX before sending power save enter command
to the FW. This will ensure that no interrupts are received while
in power save mode and as a result there wont be any HP/TP updates.
Change-Id: Ibf952bbc2c6d13fb3e4ca6b4845bc9cc887fa694
CRs-Fixed: 2883135
