Update default values of INI items to most commonly used values
in WCNSS_qcom_cfg.ini file on commercial devices.
Change-Id: Ie3a4ce2cbf4bc2352d5ebc5be939a47818a6d594
CRs-Fixed: 2874759
Change the value of WLAN_CFG_RX_SW_DESC_NUM_SIZE_MIN from 4096
to 1024, so that the rx descriptor number can be configured in
the config file of target.
Change-Id: Iedbbf3cbbfd92dc3d955e0e67aac362afbabed45
CRs-Fixed: 2862285
In existing implementation, for monitor mode below allocation
are done at pdev attach and init time.
a. 64 monitor buffer allocation for RxDMA monitor buffer ring
b. Link descriptor memory allocation for monitor link descriptor ring
This memory is waste of memory for customers not using monitor mode and
low memory profile.
To optimize this memory, allocate all buffers and link descriptor memory
at monitor vdev creation time.
Change-Id: I873c76d2f625a782532a101037915b0353928a5b
CRs-Fixed: 2829402
Some AP disables AMSDU in BA256 mode, this has draw back
with KPI in HE mode, so leave a config field to use 64 BA
forcibly to make high KPI with these types of AP
Change-Id: Ia69ffe118fd5bbda78cfb98126a483fcf305294e
CRs-Fixed: 2828304
This reverts commit Change-Id: I98f8f751dc75a3d6f2296f0844529e9c72c4090b.
This INI is moved to HDD_DP.
Change-Id: I451fa50621fdc8b6cbe027bdf1495788914481c9
CRs-Fixed: 2824623
Number of DP rings used in HOST mode and NSS offload mode differ
and in current scenario the rings are allocated unconditionally.
Allocate only required number of rings based on the HOST mode and
NSS Wi-Fi offload mode and based on the number of radios supported
per SOC.
CRs-Fixed: 2790504
Change-Id: I20ce1908da47c197ea3b406f8704b964f3d8f7d1
Add cfg_dp_sg_enable to get ini key dp_sg_support by cdp_cfg_get.
And add some comments for CFG_DP_SG to clarify more.
Change-Id: I34de242eacbdcf55398afe64b91f5534f205fa22
CRs-Fixed: 2822536
Add INI support to enable the feature of sending
ICMP packets to FW at regular intervals.
Change-Id: I888bb2f65e8a497c3e6541f213def905d6dd0727
CRs-Fixed: 2813169
Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
Add support to configure REO ring threshold through ini
for WLAN_DP_PER_RING_TYPE_CONFIG feature.
Change-Id: I02a14adcf243905ab25c2af12cb9499f32ff453f
CRs-Fixed: 2789147
The number of DP data rings are configured through INI
files and the default number of rings are defined by macros.
Default macros for DP data rings are defined twice, hence
remove such duplicate macros
Change-Id: I62927751731b88ce74c4f2651aa74c19b301b89f
In addition to firmware capability, add INI param to decide FST
placement in CMEM.
Change-Id: Icc5fdfa49e35665b59efce3fc1f1855d84c16140
CRs-Fixed: 2778898
Enable data path polling mode based on INI
dp_poll_mode_enable. Configure all data path
interfacing rings (UMAC/LMAC) and Monitor rings
in polling mode when NSS offload is disabled.
By default, poll mode is disabled.
Change-Id: I0e51207042811f517a423eb7276e3f33c5313450
Add INI to modify the HW checksum capability advertisement.
Add hook to update enable/disable of HW checksum for vdev.
Change-Id: Idd0bad1d39c8411c7b4ef19483aa2c75a756791b
CRs-Fixed: 2732099
On some cases, dp_rx_thread can not handle nbufs in time,
then a large number of packets are pending in
rx_thread->nbuf_queue, which run out of system memory at
last and failed to malloc new buffers for refill buffer
ring, fw crash is encountered. To avoid this, drop RX
packets when the pending number becomes large.
Change-Id: I370ad983b185b6ecb28fa7c0b4820b8edc00c710
CRs-Fixed: 2737191
Currently when running downlink traffic with
fragmentation enabled, the SW2REO is getting
full. Increase the SW2REO ring size to 128 entries.
Change-Id: If43bc72a8cc173d44953ca367573800243b1cc5d
CRs-Fixed: 2738309
Currently WLAN_CFG_MAC_PER_TARGET value is two which may cause
dp stats request sent to firmware with unsupported pdev mask.
Update WLAN_CFG_MAC_PER_TARGET value to one for QCA6750 target.
CRS-Fixed: 2738910
Change-Id: I14fdf483bf7d18bb2f8302251ac096885547b43b
Add INI support for peer extended stats. The extended
stats as of now include per peer Tx/Rx delay per packet
path.
Change-Id: I20d3c7f81f65f4db5f111eb103945151a8cd83aa
Adding support for enabling ini config to remap reo destination rings
for HK v1, HK v2, maple and pine platforms.
Change-Id: Id9d304521f32497e3acd845ddd2973b96b641516
Currently there is a single INI item tcp_udp_checksumoffload to enable
or disable this feature for all the adapters. In some cases, we want to
be able to enable this feature selectively for NAN mode.
Add nan_tcp_udp_checksumoffload ini item to enable or disable checksum
offload feature specifically for NAN mode. If
nan_tcp_udp_checksumoffload is 'true' and tcp_udp_checksumoffload is
false, hardware checksum offload will be enabled only for the NAN
adapter and not for other adapters.
CRs-Fixed: 2693638
Change-Id: I6e255ce68ddc7b01ebdefe4e5e8d2c985388fefe
For DBS SAP case, need to balance the CPU cost and
TPUT KPI, use tx_descriptor size to control this can
in avoid the influence of IPA part.
CRs-Fixed: 2665268
Change-Id: I702a605b7a3156e429476f6a4d623b69bb19f615
Decouple IPA TCLring and IPA WBM completion ring size from regular
Tx TCLring and WBM completion ring size configuration.
This is required as there is limitation on IPA GSI rin size
configuration.
Change-Id: I689d0e8ca72f069c5b68dc1789358e091c554d30
CRs-Fixed: 2665010
Increase Tx HW and SW to 2K and 4K for qca6490.
This parameter change is based on the tuning exercise of 1Tx:8Rx device
tests in NaN scenario. This is helping Tx device to burst to multiple
Rx peers, there by improving the TPUT.
Change-Id: I28e1eafb78612c68fe172a640b1386ac88e051a2
CRs-Fixed: 2657056
The WBM release ring size of 64 is a bit too
small for bursty nature of inwards traffic.
In monitor mode, there can be a huge ingress
of packets and returning the link descriptors
back to the WBM can fail due to its small size.
Increase the WBM release ring size to match the
RXDMA buffer ring.
Change-Id: I41c755f29566cd8cb99520736d34304344a82776
CRs-Fixed: 2650480
Decouple software tx_descs from TCLring descriptors and Increase
TCLring descriptors max INI config limit to 2k to 32k.
Change-Id: I18d014cdb0c1e26b7661ff65aaa8dffe791d7163
CRs-Fixed: 2657056
Add following changes:
a. Add CDP API to config full monitor mode
b. HTT configuration changes
c. Init/Deinit changes for full monitor mode resources
CRs-Fixed: 2632442
Change-Id: I06db5194031b3ea0f0c1e5deda20df4bc0faa0b9
The default value provided for the INI item
dp_int_timer_threshold_tx for WIN is 1000 which is
beyond the specified INI range 8 and 100.
Changing the max value to 1000 to accommodate
the default value used by the INI and avoid
warning while parsing INI values.
CRs-Fixed: 2633718
Change-Id: I0aae0338798dab27d4ecb5d67e3b3fcfee983d92
Command ring is now renamed to credit ring on QCN9000
and used for credit based flow.
Renaming the ring to give meaningful name.
Change-Id: I726aed19477fcfb256e4e0cca8ddb9389035b58c
CRs-Fixed: 2562640
Add INI dp_rx_fisa_enable to enable/disable FISA feature.
Disable the feature by default.
Change-Id: I0cc524956e32ab9f2b5c556d8ae2e1855e8d3513
CRs-Fixed: 2599917
As part of componentization of packet capture feature
removed INI of packet capture.
Change-Id: If9f599cbaf5bc3e339dc1f21ee6be36f5eb093f2
CRs-Fixed: 2614621
Add the changes in utils and wlan configuration
layer for supporting the newly added IPCI bus type
for Moselle.
CRs-Fixed: 2597342
Change-Id: I4484d6e774e9f94a322b8dee4ae7ff4460ed2634
Add INI parameters for packet capture mode
pktcap_mode_enable - control to enable or disable support for
packet capture mode.
pktcapture_mode - control to set value for packet capture mode
Change-Id: Id0ffe4cf19db6ec5823a37083d9d8ee1cfe53e77
CRs-Fixed: 2528427
Reo timer threshold is set to 512us as a default so
increase the maximum value of timer threshold to 512us
to avoid out of bound value.
Change-Id: I291e80e5930b2d3537cbbc9716b323aeb6be89c3
CRs-Fixed: 2571639
Adds new INI variable for threshold control.
Host sends message to target with new threshold info.
If buffer reaches threshold then MAC drops incoming monitor frames.
Change-Id: Id659d7df68a5ec0b22fb571dc1ffa4990f8fcc4f
Increase the REO Threshold interrupt timer from 256 to 512us. This
provides additional savings in number of interrupts in low throughput
scnearios.
CRs-Fixed: 2500152
Change-Id: I0b21a0425018d5db068016222378d16f394dc347
Add tx device limit configurable from INI.
This is used to limit the overall tx descriptors used in the device
Change-Id: I51e9611ca14bdc146de914317b38b98329130c9f
