This change adds Detail Enhancer LPF blend support from MDSS 9.0.
Support is added for qseed block in both SSPP and Destination Scaler.
Change-Id: Ic8e3732059498a156f51fb93c5fd6638bd731c57
Signed-off-by: Narendra Muppalla <quic_nmuppall@quicinc.com>
Parametrize RC minimum region width restriction as it
differs starting from Kailua.
Change-Id: I41e7cd6812ed2fadb5719ee51f4db0723be632fe
Signed-off-by: Amine Najahi <quic_anajahi@quicinc.com>
Signed-off-by: Renchao Liu <quic_rencliu@quicinc.com>
The HW support for RGB pipes were removed from MDSS 3.x and cursor pipes
from MDSS 4.x. Remove the support from s/w as well with this change.
Change-Id: Ib5b363234e200ee5c421684cf1904a38a5d90b58
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Update the cwb block offset and stride values for kalama
target in sde hw catalog. As part of the change, allow the
ctl wb-flush bit for cwb to be set based on the wb idx used.
Change-Id: Ibf7ccda88cbb47bddacf53b5af9841d381a4766c
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
From kalama, add support for QoS fill level calculations based on
line-based QoS calculations.
Change-Id: I524ca29c6e9d1912b44a328a2a88d08341cccefc
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Add support to parse and configure QoS values for offline writeback.
Expose a writeback connector property to allow user-mode to set
the usage type of the writeback block - WFD, CWB, offline-WB.
Change-Id: I864f79c4896ec757ac2d8b0f57a6a5775d164f21
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Update the sde HW catalog parsing to get separate values for rp_remap
and lvl_remap for each qos level. Previously, only rp_remap were provided
and the same was applied for lvl_remap. As part of the change, add cnoc
remap level which is added as part of MDSS 9.x.
Change-Id: I112a715f8b33cd4b028886d8074e35fef75b8aab
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Update the DT parsing logic to get danger/safe LUT values for
both portrait & landscape for all the usage types.
As part of the change, fix the correct CDP write setting for
CWB usecase.
Change-Id: I4fb6d17537de5df31c9b7f52983c0c3890265174
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Currently, CDM usage is restricted to WB2 and INTF3. Expand the usage
to all writeback blocks. However, CDM is a single HW block and can be
used by only one interface at any point of time, which is controlled by
the sde_rm reservation.
Change-Id: I9fc892046e5df6c1d4d74ca410bf48053136a1ca
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
MDSS.9.0 adds support for mdp vsync based HW timestamps
on top the existing support for panel vsync based timestamps.
This allows us to enable vsync timestamp calculations for all the
use cases including a few corner cases (e.g. programmable fetch)
which we couldn't support with the existing HW.
This change adds the new HW register support and modifies the
timestamp read logic to use mdp vsync on supporting targets.
Change-Id: I2cb1b56ca9154174331c4fc1d8f82319b6989247
Signed-off-by: Michael Ru <mru@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Dedicated registers are introduced for DSC 4HS merge block
programming from MDSS.9.0. This change adds support in the
driver to identify the change using a DSC feature flag
and separates out 4HS merge block programming to use appropriate
registers based on the DSC HW feature.
Change-Id: Ia64a1ed4bc5f5f301ab422144916cdce2a1dadac
Signed-off-by: Michael Ru <mru@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
From Kalama, the HW scheduler abstracts the low level
PP_DONE/WB_DONE interrupts and generates a common
CTL_DONE interrupt per hw ctl. This saves the software
the irq latency delays to process the frame complete
operations when multiple encoders are involved.
If supported, this change enables and waits for the
CTL_DONE interrupt instead of PP_DONE and WB_DONE.
This change adds support to wait for CTL_DONE irq in
only command mode panels as we don't drive two WB blocks
with single CTL.
Change-Id: I084d6bfb6a9fb0b48f912fe5787401c460ec5b56
Signed-off-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
Add sde catalog entries for the downscale blur supported filters
and the corresponding downscale ratios. The PCMN supports ratio
from 1 to 128 and gaussian filter supports specific ratios in the
range between 8 to 64.
Change-Id: Ifdf1a8fc7cfc5f5bd1297f10c7946c2bf9b63dcd
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add device tree parsing code for downscale blur block and sub blocks.
Add restrictions to allow downscale blur block to be used only by the
writeback. Set allowed interfaces for the block while parsing from
device-tree to restrict usage.
Change-Id: Ifa4c89ec52863d245a40bd4715a4e31f542b8117
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add support to enable writeback block to use system cache for writing
the output buffer. This is useful in cases where output is routed to
primary source pipes with 2-pass composition. The implementation is
modelled based on existing pipe based cache configuration.
Change-Id: I2b9a96c5b42eb5727d11ca0f337aeeb4e69362c9
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
From MDSS 9.x, the pp-done wait requirement as part of autorefresh
sequence is not required. Add a catalog flag to avoid the wait for
mdss 9.x+ and to support backward compatibility.
Change-Id: Ieca008d3d6ef0f7326b65433ef42ed9f49a94f87
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
From MDSS 9.0, writeback supports a programmable lineptr support, which
generates an interrupt when the configured writeback output height is
reached. Add software support to configure the prog_line and to process
the interrupt.
Change-Id: I3293ad2984c51417e4691c5b11e9c9a010067e1c
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Remove the hw feature flags that are set by default for writeback as
it does not add any value. As part of the change, remove the unused
wb register offsets.
Change-Id: I04376242e764d8d0a1edb763c9f799d7ae5447ac
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add kalama mdss revision and enable features based
on the hardware capability.
Change-Id: I27dff07b00ba16d313c5c8dc2661a10e522daea5
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Align the HW catalog to use common naming amongst the "revision"
and "version" structure members.
Change-Id: Ib6c81aee6cb49208b0699db4a75b4eb9dc79e800
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Move all the individual boolean flags from HW catalog into a
"features" bitmap. These flags are used to specify support of
various target specific features.
Change-Id: I2334b3b873f3737f91bbae4ef576408247710156
Signed-off-by: Steve Cohen <quic_cohens@quicinc.com>
Include of_common header file explicitly to use
of_fdt_get_ddrtype().
Change-Id: Idd814d6188d585b2d0ecd6935f3260a79d15401b
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
With this change, the IB vote will be based on the following:
IB = AB_aggregated / number of DDR Channels / DRAM efficiency factor
Number of DDR Channels and DRAM efficiency factor are now device tree
properties which can be modified and parsed at boot up.
Change-Id: I298043807150faec1cbc0d74eefcdd1a534b460a
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Unmult feature is currently using offsets from previous targets.
This leads to unexpected alpha transparency errors on screen.
This change updates the new offsets based on hw version and
retains the original offsets for backward compatibility.
Change-Id: Icdba050371a583f1a20b91a451be3324de12c2cf
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
TUI clients are the display sub-drivers that participate
during the TUI transition. They register with the display
TUI notification framework with a list of callbacks functions
that will be invoked during pre/post transitions and for quering
I/O memory that need to be access controlled. This change
adds RSC to the TUI client list.
In Trusted VM, all the sub-drivers are not enabled to avoid
any re-configuration of respective module registers. But the
TUI framework need to know the sub-driver I/O memory ranges
in order to accept the I/O memory list lent by the HLOS VM.
So, SDE provides them ranges by reading from a custom
devicetree property.
Change-Id: I2c4b254d539d04771339ae4a7bf4d296b7a7f91a
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
This change sets a flag to true if a mixer is a virtual mixer.
Virtual mixers will skip setting up mixer ops and debug register
dumps as their range is not valid. Since mixer ops are no longer
guaranteed to be set, add null checks before using these ops.
Change-Id: Idfe7e1e2b893dadbbe6756d69d0c4ca4fa6ae4ce
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add support to send a data packet of info, written to
predefined buffers, providing information about each submitted frame.
Add required UAPI definitions for frame data buffers and event
notification.
Add support to read ubwc statistics from hw, based on defined rois.
Change-Id: I51f279de98ae4e2a02b0df6943d334764011d5db
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Add AVR step support so SW can trigger a late frame and instead
of immediately triggering, HW will perform the update at the
start of the next step interval. This allows for a fixed SW
vsync timeline to be maintained in userland, eliminating the
usual drift from the actual HW vsync caused by a late frame.
This change adds AVR_STEP support via a DRM property.
Change-Id: I4cf8a296989805f134c2165a3bed0b050bb09c96
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
This change exposes whether or not inline rotation threshold
should be taken into consideration or skipped based on
skip_inline_rot_threshold property.
Change-Id: I4108f6ae86039815d28836bfa0e184737aaddd8a
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Made changes to disable uidle feature in yupik target.
Change-Id: If122a86ed14002399e2dbd0b62385d47c854136f
Signed-off-by: Andhavarapu Karthik <kartkart@codeaurora.org>
