The change adds a new mode property allowed_mode_switch. The new
property is a 32bit bitmask that indicates the modes each mode
can switch to. This change is required to pass the driver mode
switching capabilities, so that user mode can reject any mode switch
that is not supported by the driver.
Change-Id: I76d1733a07a6d57487ba9f461055270d7e60e060
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
When DRM property objects are created, the DRM framework attaches a
dellocator which can eventually free the object when the last reference
is removed from it. The framework can only do this before the driver is
registered. If a property is created after the registration then the
framework is unable to attach a deallocator causing a memory leak during
tear down.
The current DP driver creates a new colorspace property whenever a
new dp connector is initialized. It creates a base connector at probe
time prior to registration. But then it also creates new connectors,
post registration, whenever a new MST dongle is attached to the
topology, causing memory leaks.
This change limits the property creation to the base connector and
attaches the same object to MST connectors to avoid memory leak.
Change-Id: Ib97dc7aac260b4f3f96c1097f58bd276c68501f8
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The panel regulator votes are added by default during
dsi probe to make sure sync state driver doesn't disable
these regulators for cont_splash use case. These regulator
votes need to be removed when cont_splash feature is
disabled. Add a new connector API to handle this.
CRs-Fixed: 2734419
Change-Id: Ie54c8f246877a042afacddaeae8b90440652116f
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
This change removes the fb_kmap debugfs node along with kernel
mapping of writeback framebuffer. It also replaces dma_buf_kmap
calls with dma_buf_vmap.
Change-Id: I2fbee7fa5922071f6805d8e6df540ce87056bc0b
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change implements a new feature to read the cmds response
of the panel from sde connector interface. Sde connector opens
debugfs interface for all the connectors those have support for
cmd receive operation.
Sde connector init module creates rx_cmd debugfs file at
/<debugfs-root>/dri/0/DSI-1/ for DSI-1 connector.
Format for DSI command transfer:
echo "command bytes" > /<debugfs-root/dri/0/DSI-1/rx_cmd
byte-0: the length of received buffer
byte-1: data-type
byte-2: last command. always 0x01
byte-3: channel number
byte-4: flags. MIPI_DSI_MSG_*, must be set to 0xa
byte-5: 0x00
byte-6 and byte-7: command payload length
byte-8 to byte-[8+payload length]: command payload
Example:
echo "0x01 0x06 0x01 0x00 0x0a 0x00 0x00 0x01 0x0a" > rx_cmd
The command receive operations are allowed only if controller
(ex. DSI controller) is in active state.
Read the value of panel response:
cat /<debugfs-root>/dri/0/DSI-1/rx_cmd
returns the value of this command.
nothing - failure, xx xx - success.
Change-Id: I912b65d606e248c7a886d219f4363bf7766ee7b6
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Register for getting a blocking notified call when the display cooling
device mitigates. Update the current brightness to the thermally allowed
level.
Change-Id: I20945a20751646e6d9bbf8bb7e7039c6ce43c306
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Currently, compression info passed to resource manager is not
valid in atomic check phase. Also in current design allocation
of msm mode info object is from stack which is huge and causing
stack overflow in continuous splash use case. This change fixes
these issues by moving mode info object to heap allocation.
Change-Id: Ifaf39b3ae59c942da5c00b82c73cb97cdaf500d3
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
If DPU hardware supports demura feature, install the connector
properties related to demura feature.
Change-Id: Ieaddfc695e9f57e3c45e2bc0bd2c2e103f895ba8
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Add colorimetry data block parsing to SDE EDID parser so that
we can eliminate usage of the same information parsed in upstream
EDID parser.
Change-Id: I53692bb90eeee1f8a865da54ce0e8932c381489a
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This is needed to replace usage of upstream EDID parser
to satisfy GKI requirements.
Change-Id: I1e4043bd8e95b2ff71e7e4b05706cbeb9c66b03d
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add VSVDB parsing support to sde edid parser. This is required
for HDR10+ support. Currently the parsing is done in the upstream
edid parser. This shall be removed in a subsequent change.
Change-Id: Ibd3a31e12bba68e14e278e0e478656453eb111ac
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This change programs dither based on user mode input data and
reprograms the dither when device comes out of power collapse.
Change-Id: I83be20c8eb2dc2221cc57cd2395f6512338ff6ef
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change enables display drivers code compilation
for lahaina target and current location of header files
is replacing the header files in usr/include/drm directory
before installing display specific header files. This change
ensures both the drm and msm_drv header files are exported
to user mode clients.
Change-Id: If6fc347598b902e670b7206dbcb82fe0740b3984
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This snapshot change adds downstream support
for drm 5.x+(msm_lahaina branch) linux kernel.
Change-Id: Ia691c95da155a00e449c91a2f1a5b20a8e71aed4
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add changes to support avr mode config update during
prepare commit which happens before gpu fence wait
for the input buffers.
Change-Id: Ib2cb5b7e1f10501914c003f6cf066b85048f79d4
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Add support to enable one-shot mode during qsync
update. This feature ensures the frame drops can be
reduced due to delayed software flush for the
current commit. Also, add changes to disable the qsync
feature post commit.
Change-Id: Icb158853f52284bcf8fa641e5f62200c5460b660
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Add the colorspace property for DP controller for MSM. Also, change
the default method to send the colorimetry information to the sink
from MISC bits of MSA to VSC SDP packets if the sink supports it. This
helps to avoid dynamic switches between the packet types for sending
the colorimetry information during BT2020 and DCI-P3 use-cases.
Change-Id: I7ddf879a187b023fcf7404d64028e4d19b031119
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
The drm_panel defined in sde_connector was not used, so
removed it.
Change-Id: I70a94f11ebd60362d25e37a256f46d3d4942089d
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Create a data structure to maintain available hardware resources
and track capabilities. This data structure is used to send
the current available resources and caps information to
connector ops get_mode_info, get_modes and validate_mode to
process the display mode.
Change-Id: If38fc628ee5ab4729821f88c0050ab45375187b8
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Primary and secondary displays should have first priority
when reserving lms. Static reservation can potentially block
higher resolutions for the required displays. This patch gets
the layer mixer requirement for primary or secondary display
if available. It reserves those layer mixers dynamically
for the respective display when connector is registered.
Change-Id: Id69dac4c72d6b20008049f4aeb71c0f97d0a426b
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
