Vlan Header is not initialize before passing it
to IPA driver, due to this some Vlan header fields
are junk and causing issue in IPA driver.
Fix is to initialize the header with 0
CRs-Fixed: 3342771
Change-Id: Ic29e0822f32bec5ea71702ceea75b7354caeda65
If IPA tx alt doorbell address is not returned from IPA, wlan
should not touch the tx alt paddr and vaddr either. Therefore
add the NULL check before handling the tx alt ring resources.
Change-Id: I6b98fe5c003f3e796441513515190ea592d14d01
CRs-Fixed: 3339322
Reference taken on peer with wrong MODULE_ID, hence
while unref on peer is failing.
Change-Id: Ifd4360ad8db877cfbf67fb6d80fdfb41aee4ff56
CRs-Fixed: 3317145
Get bank id initialized for IPA usage from DP layer and pass it up
to IPA driver.
IPA is not able to handle bank id on a per-interface basis, and
hence set up same bank id for both TX pipes.
Change-Id: I69632a5e4e2ae115ef9131d5579822b82c001fca
CRs-Fixed: 3289537
Debug framework for tracking the SMMU mapping and unmapping of
skb buffer when IPA offload is enable and IPA_SMMU_NBUF_TRACKER
is define.
CRs-Fixed: 3255423
change-Id: I8966097945b33cb866f4642b98b3d1a4beabfad7
cdp api is getting call from dp layer.
Fix is to call correct dp api from datapath file.
CRs-Fixed: 3279426
Change-Id: I142910276d76c600e5d79289270bbfe156bfab1c
When EasyMesh feature is enabled, ARP replies from WDS node are
getting dropped by the AP, as there is no proper way to find the
DA_PEER with given WDS mac address.
Fix is to get the peer mac address for wds node based on ast entry.
CRs-Fixed: 3265158
Change-Id: I5ea890ce37dfde89d067b471417ba7aeb8c5d6f5
Create a new API to update wdi hdr type for IPA and Fix
the return type for cdp call.
CRs-Fixed: 3246990
Change-Id: Ic8adb1f46bfeda6598a01ffdda27339cfa04ee9d
Change macro IPA_WDI3_RX_TWO_PIPES to IPA_WDI3_VLAN_SUPPORT to represent
the feature supported under this macro
Change-Id: Ie1e387d641052cd5690c63f0c1216f4852544605
CRs-Fixed: 3250264
In IPA offload, both tagged and untagged traffic cannot be handled with
a single rx pipe. Hence, add support for 2nd RX pipe for tagged and
untagged traffic respectively.
Change-Id: I77ff633327696f66df42fb592492321c1591646b
CRs-Fixed: 3226021
As part of IPA offload support for WCN7850 chipset, properly define
TX ring indexes into soc->tcl_data_ring[] and soc->tx_comp_ring[]
used by IPA.
In the change, use wlan_cfg_get_rbm_id_for_index() to get correct
rbm values for WBM2SW ring used by IPA.
Change-Id: Ie5b6743c1cb2adfa156735fc84dc1429a67f833a
CRs-Fixed: 3246038
To support WDS feature in IPA driver, WLAN needs
to update the ast entry for any new rx packet, and for
end-nodes connected via repeater to root.
CRs-Fixed: 3226348
Change-Id: I7383b12f18e7c70ec06499d66130667eca033131
With IPA WDI version 3.0 including HST, HSP and even HMT,
GSI is the implementation instead of IPA uC. As a result,
desc_format_template filed in pipe setup info is not used.
Hence clean up the unnecesssary setup for desc_format_template.
Change-Id: I51f87d9e22951c6a621c11984ed5e7084990c5c0
CRs-Fixed: 3231623
After enable and disable of both radio, If second radio is enabled
then the instance_id from wlan driver is passed wrongly to IPA driver
which is in leading to initializion of first radio on IPA driver side.
Fix is to take the instace id based on psoc id and set the prod and cons
pipes based on instance_id instead of IPA given handle.
Change-Id: I26f4f3fbd23284e79a380d212ad07aceac50f053
CRs-Fixed: 3179306
Currently in some case we are receiving non error packets on REO2TCL
ring, which is causing issue.
Fix is to set DEST_RING_MAPPING_0 to SW1 for REO dest ctrl
register, So that non error packets with reo_destination_indication
with 0x0 in the reo entrance ring will be routed to SW1 ring.
Change-Id: I67f78f35e7dba899943307902d99d0325a60498f
CRs-Fixed: 3150186
2x_pdev changes are include for support new IPA API's
and change the existing API's argument to support new
parameter which is ipa handle, create a new API to get
the IPA hdl from IPA component in DP
Change-Id: I3d2b378620dbd1e64d295623534126e0eebc2d28
Currently the MAX_REO_DEST_RINGS is used to iterate reo dst ring. If the
MAX_REO_DEST_RINGS is more that no. of reo dest ring initialize, the
print is seen on console as hal_ring_hdl will be null for extra
iterations.
Add fix to use correct variable to iterate reo dest rings
Change-Id: Ibcb44dda49696a7bb029b49ce3d50acd8741590a
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
Currently, wrong address is given to insert session_id in
meta_data.
To fix this, Passing pointer variable instead of address
to the pointer so that meta_data is filled correctly.
Change-Id: I019d73dc728fb214fd7c06a5027f0507ab4822a1
CRs-Fixed: 2959923
While Rx buffers are getting umapped from net rx context if IPA
pipes are enabled at same time from MC thread context this is
leading to race condition and IPA map/unmap is going out of sync.
To fix this introducing IPA mapping lock and IPA mapping need to
be handled with lock held.
Change-Id: I9fa71bdb6d4e4aa93fc795cc5dd472a181325991
CRs-Fixed: 2945063
It's regression of change: qcacmn: Fix smmu fault for tx buffer unmapped.
Only 1 tx buffer is smmu mapped for IPA with it.
During STA-SAP tethering, when IPA access 2nd tx buffer, smmu fault
happens.
Remove qdf_assert_always since it already exists in
__dp_ipa_handle_buf_smmu_mapping.
Change-Id: Ife8ed17d85a8bcfc507c312001af4b905c9b3a27
CRs-Fixed: 2937435
Depreciated IPA APIs are currently getting compiled.
To fix this, adding linux kernel version check
Change-Id: I2288db34c09d60047c67a5df9081de08a6c2f62b
CRs-Fixed: 2927413
The status of the IPA SMMU MAP/UNMAP operation is stored in the
result field of the mem info structure that is passed to the
IPA driver. Currently, this field is not checked for MAP/UNMAP
failures; when IPA HW accesses such a buffer for which
mapping is not correctly setup, it will lead to SMMU faults.
Check the result and assert(on failures) to avoid such issues.
Also, check if the physical address passed to the IPA driver is
non zero value.
Change-Id: Iec0702bdf4a07ea37e1213a33dc970028da654df
CRs-Fixed: 2928744
Currently a set of IPA2TCL and WBM2IPA rings is used for
IPA TX data path. Issue is when wlan is configured as
SAP-SAP DBS mode, slow 2G traffic will consume much more
TX resources and thus 5G traffic will have starvation,
which leads to severe degradation of DBS KPI.
Therefore separate IPA2TCL (SW2TCL2) and WBM2IPA (WBM2SW4)
rings are added to support alternative IPA TX pipe for 2G
traffic.
Change-Id: I4b648d0bcacbcde0b9b0a824516c1f06e3b0c7ad
CRs-Fixed: 2750079
Check the return status of the IPA api that creates or
releases the smmu mappings of the tx/rx buffers. If the
api returns a failure then assert.
Change-Id: I755765c7c35c901341279eefbc8087d0dce0494c
CRs-Fixed: 2898353
Currently struct ipa_wdi_conn_in_params occupies 1588 bytes and putting
it on the stack is rather expensive, which could potentially lead to
stack corruption.
Fix is to reduce stack usage in dp_ipa_setup by dynamically allocating
struct ipa_wdi_conn_in_params on the heap.
Change-Id: I8f71f44906a5c95f37627f7573b57b7825daaa7e
CRs-Fixed: 2852027
WLAN HW can still access the IPA tx doorbell address post
disable pipes if there are any pending tx completions which
could result in a NOC error.
Fix is to reset the WBM2SW ring HP addr to shadow addr in
DDR before pipes are disabled.
Change-Id: I52900eb34530388487923a887354ef8839d8c728
CRs-Fixed: 2846421
Account for the Tx buffers allocated for IPA during
init. Add this memory to the overall Tx nbuf memory
allocations. Ensure that the nbuf size is taken from
end pointer to head pointer of nbuf.
Change-Id: Ie3a46c7e7674f3f2e1bf9e0791a7eb53d4bb0b21
CRs-Fixed: 2831015
When driver doing ipa rx buffer smmu mapping,
qdf_spin_lock_bh is used to protect rx descriptor pool,
but might sleep function is called by API ipa_is_ready.
This causes kernel panic about sleeping function called
from invalid context as following call trace:
Call trace:
___might_sleep+0x204/0x208
__might_sleep+0x50/0x88
__mutex_lock_common+0x5c/0x1078
mutex_lock_nested+0x40/0x50
ipa3_is_ready+0x2c/0x60
ipa_is_ready+0x24/0x38
dp_ipa_handle_rx_buf_pool_smmu_mapping+0x2dc/0x6d0 [wlan]
Move the ipa is ready check function call outside of spin lock.
Change-Id: I5d3a79dff8a045791834733514a40f7c1ccb0d8b
CRs-Fixed: 2839292
REO remap register direct writes as part of SAP stop could
result in a NOC error if the UMAC is in low power state.
Fix is to use shadow register writes for REO remap and
WBM HP registers.
Change-Id: Ie515c3d28f4ccdd99a3757808f1ab6c5cf373e3d
CRs-Fixed: 2813105
wlan Tx completions doorbell is rung after IPA pipes are disabled
To fix this, Check if tx completions are pending before disable IPA
pipes.
Change-Id: I1903e593cd6a546a277979073f0a9ba62b681644
CRs-Fixed: 2796989
Add apis to map generic registers to shadow region. Existing
logic includes mapping only srng based regs to the shadow
region.
Add support to map REO control regs and WBM2SW2 rel
ring HP reg address to the shadow region in case the direct
reg writes in IPA enable/disable autonomy fail due to UMAC
block being in a power collapsed state.
Shadow reg mapping for these regs is provided to FW during
init. Add stat shadow_reg_write_fail to track shadow reg
write failure and shadow_reg_write_succ to track successful
shadow writes.
Change-Id: I04790765a3de80047689657e2cad0b73123440b9
CRs-Fixed: 2790321
A htt message arrived after ipa context is freed as part of
deinitialization which was dereferenced by event handler
assigned to pdev->ipa_uc_op_cb, resulting in crash.
To fix this, during deinit pdev->ipa_uc_op_cb is deregistered
and assigned NULL before freeing up ipa context.
Change-Id: I8125cb104a538e88cda93960f7443129fabd850a
CRs-Fixed: 2793295
Add API to do IPA Tx buf SMMU-S1 unmapping and register it
with cdp ops for Hastings, also assert if map/unmap failed.
Change-Id: I4071b5fccd84c3c97b9dccc40c6f798d70993189
CRs-Fixed: 2792170
