The PCM_RATE bit field in LPASS_TX_CDC_TXn_TX_PATH_CTL
ranges from 0 to 6.
In the current implementation of tx-macro, the value
read is mapped directly to the sample rate instead of
the indices. Change is to correct this.
Add the delay based on pcm_rate in va-macro as well.
Change-Id: I6cb7e58e71f2a25356608611f1dfed83171706f6
Signed-off-by: Soumya Managoli <smanag@codeaurora.org>
During sound card register init call, if swr pdev
is not initialized yet respective soundwire port
config is not updated to soundwire controller device.
In macro drivers, update swr pdev into macro private
data prior to platform device add.
Change-Id: Ifa67471cfc7a10b102b573df6285e598bb0b5e5e
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
In bolero-cdc and tx, va, wsa and rx macros, move schedule_work call to
add the child devices to the point later to where the parent
initialization gets completed.
Change-Id: Iaa07329a25020dde21d9249c3848bb7fcf7d816a
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Auto suspend timer for core vote is triggering before read write complete.
Move the auto suspend of core vote to post read write operation.
Change-Id: I758cf57bde4e0b56320ef18f6f17adc655fc8fcb
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update clk_div setting for low power decimations based on
decimation rate instead of lpi flag.
Change-Id: I6e445618af4bf159f3d88a7bc5d07a403a06c1ab
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Move the enable and disable of wakeup capability of
swr_tx gpios to clock setup to disable or enable it
in all required usecases.
Change-Id: I9fb76926d8520c382e7f19777190357c50f98994
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
On bolero 2.1, SVA switch is not retain at VA_CLK
when switch between handset and headset mic sva.
Update the clock release logic during swr power event.
Change-Id: I62b492dcbff4b4f3249d1a6b3b792690b5b5c27c
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Do not register afe event listener for shima and make
tx swr gpio as wakeup capable.
Change-Id: I4d805c2b65e6c424c1c215431caa75f6181a16e8
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
When switching TX_CLK to VA_CLK, there could be some
IRQ missing with current design. Switch the clk in bolero
to avoid the corner case.
Change-Id: I9a8b15ade3358c7276356a0f6555b541651d85a5
Signed-off-by: Meng Wang <mengw@codeaurora.org>
This reverts commit 68cbba47d0 as this
causes AMIC SVA issue.
Change-Id: Icb08cec87b108243fc9660a519c332c1f3ffb48d
Signed-off-by: Meng Wang <mengw@codeaurora.org>
When switching TX_CLK to VA_CLK, there could be some
IRQ missing with current design. Switch the clk in bolero
to avoid the corner case
Change-Id: Iec5cac16e026e4e46646894c546f1acb3fce4fa8
Signed-off-by: Meng Wang <mengw@codeaurora.org>
This reverts commit 68cbba47d0 as this
causes AMIC SVA issue
Change-Id: I0e66c97dfc9499c30942ce2e3a123be58833eac8
Signed-off-by: Meng Wang <mengw@codeaurora.org>
When switching TX_CLK to VA_CLK, there could be some
IRQ missing with current design. Switch the clk in bolero
to avoid the corner case.
Change-Id: Iec5cac16e026e4e46646894c546f1acb3fce4fa8
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Use number of bits set in active_ch_mask to calculate
active channel count. This fixes improper update of
channel count if same kcontrol is issued more than
once.
Change-Id: I84dc33ad5b6dbfc3babf5bbfeab1e2e71af5983b
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
This reverts commit 68cbba47d0 as this
causes AMIC SVA issue.
Change-Id: I0e66c97dfc9499c30942ce2e3a123be58833eac8
Signed-off-by: Meng Wang <mengw@codeaurora.org>
As shima has hw conn to get inband interrupt while lpi enabled,
there is no need to register for event listener via afe.
Skip register for event listener for shima.
Change-Id: Ib15ae005a6920d0b2a584a86e896880bda21052e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
HW vote and unvote is currently called from multiple
clients leading to synchronization issues
during SSR/PDR scenarios. Synchronize all the vote requests
by using digital codec resource manager.
Change-Id: I7e63f69ab5d761a3bb4c7ce70bbef2e8bfd76cfb
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
(cherry picked from commit 31aa875405)
This reverts commit d02c7efb35.
and commit 61f235e5bd to avoid AOP
related issues.
Change-Id: I0b8b44bc5cca6bef6bc18c228f08a9c585c79c1c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Restore change to retain audio_hm voting and
ensure AOP hang issue not seen by masking interrupt
wakeup of swr pinctrl pins.
Change-Id: I51bf36d6d6b0999abf10a4bc94cce900d1adf1d5
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
For island SVA usecase, ensure register for
AFE in-band interrupt.
Change-Id: I24e6dfadfaa38919114000fb09a7906264020cd9
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add a pre ssr up event in all macros ,where GFMUX reset
to done before set the dev_up flag to true.
Change-Id: I77229ccd0ed68aac841146a89fe7f76961260aea
Signed-off-by: Prasad Kumpatla <nkumpat@codeaurora.org>
Update SOC_SINGLE_SX_TLV to SOC_SINGLE_S8_TLV to make codec
driver compatiable with upstream driver.
Change-Id: I4061b015d715978f3b294ad630f53b64bf66c2b7
Signed-off-by: Meng Wang <mengw@codeaurora.org>
HW vote and unvote is currently called from multiple
clients leading to synchronization issues
during SSR/PDR scenarios. Synchronize all the vote requests
by using digital codec resource manager.
Change-Id: I7e63f69ab5d761a3bb4c7ce70bbef2e8bfd76cfb
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
For bolero 2.1, amic connect on any SWR input.
Update API to check amic usecase.
Change-Id: Iced7df39b0dbaf83e77a72536e55223d3bda2289
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
During multiple PDR usecases, due to sync issues
port collision interrupt is observed.
set wsa state to device down before cancelling the ocp
workqueue and bail out from the workqueue when wsa state
is set to device down.
Change-Id: Ibefb338c1d6d2901b8773928fa2c0c48b51ac6f7
Signed-off-by: Prasad Kumpatla <nkumpat@codeaurora.org>
For bolero 2.1 with SWR_TX in va macro, update SVA fixes.
Change-Id: I250df0fe476bc2c0439ab491a17dea2e7ac18707
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
If va_macro_tx_va_mclk_enable returns error,
va macro autosuspend will not be called.
Add autosuspend before return.
Change-Id: Iea3728fab2d240514ca4a7e02ef535edce977ee8
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Enable and disable FS_CLK gen at every
mclk enable and disable call to handle
fs_clk gen count.
Change-Id: I87e1cf112a48029cf0d6e7227fcc5167e973fdad
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
For bolero 2.x, update dmic clk_div to use 1.2M
instead of 600k if non-island usecase.
Change-Id: Ia057283c164de576cfd05f4c64f6db24db589ead
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Glitch is coming sometimes during amic record.
Correct sequence to resolve the glitch.
Change-Id: I3c062632229826f6fe32e2f1ea9e07381c21d902
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check soundwire clock source before clock switch to avoid
redundant soundwire device suspend for the same clock source.
Change-Id: I613789b23c171959a60c9a059a30b3f1494f3dfa
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
