WMI_MGMT_RX_REO_FILTER_CONFIGURATION_CMD is used to the configure re-order
criterion for incoming management frames. Add WMI layer support for the
same command.
Change-Id: If1498fd4fbccd86e7d54d9eac268868b36523d06
CRs-Fixed: 2960472
When MGMT Rx REO feature is enabled, FW will be sending MGMT Rx REO
parameters TLV as part of WMI_MGMT_RX_EVENTID for the frames that require
reordering. Add APIs to extract the same.
Change-Id: I57b132927cf413384d680b5778bfe6a2e2737adf
CRs-Fixed: 2960471
When MGMT frames are consumed by the FW, FW sends MGMT Rx FW consumed event
to the Host. Add WMI layer functionality for this event handling.
Change-Id: Id95f41a717b88589e861781e1111b17dc90475be
CRs-Fixed: 2959118
Add functions to parse and extract wmi smart monitor
event received from target.
Change-Id: Ic18e3134b684c5f8e12839e997d628909a7e27c9
CRs-Fixed: 2969247
When obss scan is enabled, FW will trigger scan periodically by
a timer. If a scan was triggered, FW need to access host memory
for data transfer. Occasionally, suspend may happen during one
scan, then FW is unable to access host memory and fw will crash.
So disable the obss scan before suspend.
Change-Id: Ie507da929a3701473cb57888e96e702e34d4c95a
CRs-Fixed: 2927239
For some targets, FW expects WMI_REQUEST_UNIFIED_LL_GET_STA command
always over QMI irrespective of WOW state. FW will crash if this request
is sent over WMI on those targets. Currently there is no direct way for
the host to identify this requirement by FW. So FW may crash when this
WMI_REQUEST_UNIFIED_LL_GET_STA stats request is sent over WMI.
To resolve this, add service bit support for LL_GET_STA request over QMI.
With this change the INI parameter send_ll_and_get_station_stats_over_qmi
becomes obsolete and corresponding code will be removed.
Change-Id: I43f2827a0b1cae6e75f1224f452f8277d53736b2
CRs-Fixed: 2847483
Move ctrl_path_twt_stats related functions to appropriate source
and header files.
CRs-Fixed: 2871393
Change-Id: I7043259c102e5aee6cbb13260ce2bb0c53c17853
Firmware has added support for control path stats
infrastructure. Add wmi support to prepare wmi tlv buffer
and send WMI_REQUEST_CTRL_PATH_STATS_CMDID. In the response
path, add support to handle WMI_CTRL_PATH_STATS_EVENTID and
extract the tlv.
Change-Id: I930a44187af29adfda8acd90d0e41cff5fc94603
CRs-Fixed: 2856370
Add new API to handle the logic of sending the WMI command,
WMI_SET_TPC_POWER_CMDID. Create the struct to hold this new
transmit power information.
Change-Id: Ibc7c6109176577f56d149baf87022de557e84445
CRs-fixed: 2841781
Currently, Stats request commands are sent over qmi right from the
target suspend request is sent to FW. This is leading to a crash in
FW since it is trying to access PCI when it is in suspend state.
To address this, send stats request over QMI only after the ack is
received for the target suspend command.
Change-Id: Id7a79d52740916f66476bf911e571c0ff466c7d3
CRs-Fixed: 2838737
Introduce wmi_validate_handle() with the caller function name
embedded in it to validate the WMI handle and log incase
of error. Calling functions can avoid logging in case
wmi_validate_handle() returns -EINVAL. This reduces logging and
thereby memory foot print.
Change-Id: Ie0a6a84ffad6e5cf2da8f547c7209dc77cdf5729
CRs-Fixed: 2838960
Currently, FW diag logs, management frames and stats responses are
processed in worker context. Because of this, there is a possible
out of memory scenario when there are huge number of diag events
waiting in work queue.
To address this, process diag events in a separate worker thread and
set the limit for the number of diag events that can be queued in
work queue.
Change-Id: Ie6e5b905a3b591cf724cd6b024bec0612f9e2e0c
CRs-Fixed: 2818013
Skip wmi sequence check during SOC stop and enable after
initializing wmi handle. It is required to skip sequence check
during soc stop as the endpoint flush is preceding CE flush.
CRs-Fixed: 2813341
Change-Id: Ieb821483e9786471d033773dc2365ab456345f83
Send unified ll_stats and get_stats request over qmi based on INI
configuration.
Change-Id: Icc43352c1ba19696148619100ee27fda4d5ffb41
CRs-Fixed: 2791043
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: I5e6f42f9e3836ef4bf61d3d9220f8cedb775cbd5
CRs-Fixed: 2778479
Host add support to send WFA test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID.
Change-Id: Id9bdec16c69a8c16cb4ce1fac87688023c768ee6
CRs-Fixed: 2772004
Donot block wmi command sending inside #if macro.
This change is needed because WIN uses only the FW log level
setting and not the complete feature. Only the feature
should be enclosed in #if macros and not the wmi command
sending part.
Change-Id: Ia28c0487d360c1b0a54374bb237811eba6b1af41
populated fils discovery, unsolicited probe response from
vdev extension stats and populated to APSTATS.
Change-Id: I762d7f36fa45f9048cf591bde3550a415e23bdcb
To get the pmf beacon stats from firmware, host sets
WMI_REQUEST_PMF_BCN_PROTECT_STAT bit in stats_id param of
WMI_REQUEST_STATS_CMDID command. Firmware supporting pmf beacon
protection stats responds host with stats in wmi_update_stats_id
event.
Hence add support to get PMF beacon protect stats from firmware.
Change-Id: I99efd94ce5367da1312f60251ce7106997dd8bc8
CRs-Fixed: 2705084
To send received raw event buffer to event handler
Send without processed buffer to registered event with buffer
type WMI_RX_RAW_BUFF
Change-Id: I2a401e2e7afbfd8f32d4bd521d184ed9ddcdb264
Currently, stats over QMI features can only be disabled over build flags,
which is not flexible. Hence, add a CFG ini item to enable/disable stats
over QMI.
Change-Id: If5d57d2fc781fecc8817c2da8f61a2f7977d9c77
CRs-Fixed: 2752310
FW advertises scan radio capabilities as part of service ready
ext2 event. This is an optional TLV, presence of which indicates scan
radio support for the that pdev.
CRS-Fixed: 2746769
Change-Id: I5a0231c54375e9f00c85f0ad92839e2fa6c79f39
Add support to populate 11AX wireless modes advetised in ext2 service
ready message. To support older FW that do not advertise this, use
existing host workaround to populate these in host itself.
Change-Id: I3b3b280672592c858bd3f6f0e368909a16bd30ee
CRs-Fixed: 2650136
In order to enable/disable the OBSSes whose transmission can be treated as
SR opportunity for SRG and Non-SRG based Spatial Reuse, add the required
WMI support. Also, add the Host abstractions for the following
- WMI_VDEV_PARAM_ENABLE_SRP
- WMI_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT
CRs-Fixed: 2684157
Change-Id: Ib3e919766436ca4d4e7f9242b642ba309dbf9a47
Add support for processing the start scan response
WMI event. FW provides the necessary information to
segregate FFT bins to pri80, 5 MHz and sec80 in
160/165 MHz. Also, cfreq2 and the channel width is
provided to FW via WMI command.
CRs-Fixed: 2672081
Change-Id: I666b6c18a63d5d01117aa9cbd611691c6f8b2793
To be able to configure SRG BSS Color Bitmap and SRG Partial BSSID Bitmaps,
add the required WMI support.
CRs-Fixed: 2665817
Change-Id: I141abe24dd34cab92f45b230b385500902d01416
WMI_WLAN_PROFILE commands support for tlv path.
Add WMI profile enable and trigger commands in tlv path
Change-Id: I10f867b181b559b82c097d6a61236f2145549238
This patch adds the function to extract and parse the wmi events
WMI_VDEV_AUDIO_SYNC_START_STOP_EVENTID and
WMI_VDEV_AUDIO_SYNC_Q_MASTER_SLAVE_OFFSET_EVENTID. These events are
required for ftm time sync feature.
Change-Id: Ib17da82b7a8abfcff5d18125a0ba0e5249d6bf54
CRs-Fixed: 2615452
This patch adds the support for forming tlv commands
WMI_AUDIO_SYNC_TRIGGER_CMDID and WMI_AUDIO_SYNC_QTIMER_CMDID.
CRs-Fixed: 2607605
Change-Id: Ifaf2b43b60cf604d79d5649b27632422850a0d61
