Currently line number is not useful in the logs and to print
the line number consumes lot of memory in driver text area size.
To reduce the driver size add feature flag to enable/disable
line number logging in the driver.
Change-Id: Ie11e3425cb61edad09c0da0337d0daa18e2a56d6
CRs-Fixed: 2766244
In order to improve the Genoa DBS KPI, need to
increase the IPA tx complete ring size from
1024 to 2048. And the tx buffer count also will
increase from 1023(1024-1) to 2047(2048-1) according.
But in fact, as for wlan fw, it just only reserve
1500(1100 for 5G, 400 for 2.4G) tx desc for packets
from IPA, so some tx buffer will not used here,
which will waste memory. So to save some memory,
export CONFIG_LIMIT_IPA_TX_BUFFER for platform
configuration to limit the max IPA tx buffer count
Change-Id: Id5d4c5a220b588747f3d1981627f6253d7c3305b
For older targets thermal mitigation is supported for the apps.
In moselle there a new processor wpps on which firmware runs,
this commit adds the support for the thermal client wpps.
Change-Id: I89896dce808807486ef56b90812369f3d5f4b270
CRs-Fixed: 2757566
DBR_MULTI_SRNG_ENABLE is used to init DBR for both bands of DBS chip.
Some pltforms won't set CONFIG_CNSS_QCA6750 to n if chip isn't
Moselle. This change defines DBR_MULTI_SRNG_ENABLE if
CONFIG_CNSS_QCA6750 isn't equal to y.
Change-Id: I0cf726b542196c57d90cf38ec0db0f4ab38d3358
CRs-Fixed: 2759775
Change feature flag name due to address alignment is
required from HW design perspective
Change-Id: Ia80b6371f50db144336aeaaf2db2ecdc77ac0380
CRs-Fixed: 2748507
Take care to update the EAPOL Tx frame DA with AP mac addr if
DA is broadcast address as EAPOL BC doesnot make sense.
Change-Id: Id58b7b7971f5a7c11de0b46c6189a6e6ad1917ab
CRs-Fixed: 2745826
For SAP on DFS channel, the PCIe link down should be prevented
so that HalPhy can access DDR memory to report Radar found event.
Change-Id: Ia256d5df4d59071830d09c3f4821d73196327128
CRs-Fixed: 2740443
Update MULTI_IF_NAME while DYNAMIC_SINGLE_CHIP is not
"wlan" to support dual wlanhost driver load case
Change-Id: Id7c4e7b6e8c14fe0ba64b3187ec46f7b248058cb
Currently there are 2 places where max number of keep live pattern
are defined:
1. #define WMA_MAXNUM_PERIODIC_TX_PTRNS 6
And it can be configured by CONFIG_CFG_MAX_PERIODIC_TX_PTRNS.
2. #define MAXNUM_PERIODIC_TX_PTRNS 6
And it is hard coded value.
It is possible to have different values defined on some platform,
so we might give tgt_cfg->num_keep_alive_pattern value as 2,
but still allow more than 2 keep alive patterns adding to target,
where assert might happen.
Fix it by defining max number of keep alive pattern at one place.
Change-Id: I70ec3fa2e56a39cf8086750d966d95e41b2b75a7
CRs-Fixed: 2745443
On some cases, dp_rx_thread can not handle nbufs in time,
then a large number of packets are pending in
rx_thread->nbuf_queue, which run out of system memory at
last and failed to malloc new buffers for refill buffer ring,
fw crash is encountered. To avoid this, drop RX packets when
the pending number becomes large.
Change-Id: Ie4e001dc584821cf68253aa3a15a5fd72394c736
CRs-Fixed: 2737181
Enable PM QoS support for 5.x kernel by adopting dev PM QoS APIs to
request device structures for CPUs and then requesting QoS on those CPU
devices.
Change-Id: I9c7565b44a72145e11178fe360f413ff578142cf
CRs-Fixed: 2734025
Add configuration feature CONFIG_WAPI_BIG_ENDIAN to
enable or disable BIG ENDIAN WAPI configuration based
on device type.
This was done as newer chipset firmware expects the
WAPI seq in big endian format and to maintain backward
compatibility with the older chipset firmware.
Change-Id: I972ca89e601b706e53408b0751c265d0aa311029
CRs-Fixed: 2746749
Enable logging feature which helps to check rx ring refill failure.
Currently rx ring refill count is updated same time from multiple
places without protection, so use atomic variable for refill count.
CRS-Fixed: 2740225
Change-Id: Icd88d351cb15d0f18edf0b986e4de95dbe4e6989
Enable RX buffer pool support for QCA6750. This will be utilized
during low memory conditions.
Change-Id: I8cee1e0996c81f3c4c408a22923d5107f4d014c3
CRs-Fixed: 2731507
Module is saved in specified memory location when loading. In some
third platform, after rmmod/insmod wlan.ko for a while, wlan.ko may
fail to load due to memory fragmentation.
Split wlan.ko into wlan_resident.ko and wlan.ko. Keep wlan_resident.ko
in kernel all the while and trigger insmod/rmmod only on wlan.ko.
wlan_resident.ko contains all the module realization while wlan.ko
only contains module init/exit.
Change-Id: Iaeb6d810293cc000de8d6ec1df5cd985cef0c317
CRs-Fixed: 2727941
Dynamic rx aggregation feature depends on the context
id which is obtained from the packet context block.
This context id is invalid when this feature is not
enabled, and hence can lead to out of array access/write
leading to memory corruption.
Fix this issue by not using the context id when the dynamic
rx aggregation feature is not enabled.
Change-Id: Ie551217409b0f5aa2f704f9c617949e0d42a74d0
CRs-Fixed: 2742653
To support "no dbs intraband MCC" feature for LITHIUM target, enable
FEATURE_NO_DBS_INTRABAND_MCC_SUPPORT flag in Kbuild.
Change-Id: I2f94d99fae0ec31dd8e5056397e59be3478b7540
CRs-Fixed: 2739080
Enable the sanity check for rx descriptor nbuf
even for the perf build.
Also enable the rx rings history.
Change-Id: Ib127029009d0657ea51d3592af6a42f3de210c16
CRs-Fixed: 2739120
Enable handling to drop the raw Rx frames as both driver and stack
is not expected to handle them.
Handle invalid FISA flow index which is out of valid FISA flow_id range,
This can happen if we are looking at wrong or invalid TLV, in such case
it is OK deliver frame without FISA aggregation.
Change-Id: I746d4ad1ea5ba6d60cbadddb55803626abfb2868
CRs-Fixed: 2733978
Add macro ROAM_OFFLOAD_V1 for new code and implement below functions
for connection manager roam part:
csr_handle_roam_state_change() roam offload state related handler.
Filling WMI_ROAM_SCAN_RSSI_THRESHOLD cmd parameters related process.
Change-Id: I0351155ca5a3d68ade6568c7527c5708582ccf1a
CRs-Fixed: 2730826
Rename file name and modify function names to keep it inline
with sysfs attribute name 'stats'
Change-Id: Iffc390d4865977f9eff72a6a4bcf708c014f482e
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'range_ext'
Change-Id: Icf7ebbbcf1b8b219e64d1c9b98f1946069f91322
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'wlan_dbg'
Change-Id: I7d0e7b67afa701abd64efb62012c218ee4ab158d
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'fw_mode_config'
Change-Id: Ia389fa8807bbd0e58de58c503d9f3bbbef9ec707
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'scan_config'
Change-Id: I6621cbe5571541d073072ef9e0348d771fd3bc4a
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'radar'
Change-Id: If13effc45323f5a286d8aeb7a8e27848cb3e618b
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'tx_stbc'
Change-Id: I274c1405fab7385202431b48d65603c38783222b
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'tdls_peers'
Change-Id: If6aa504dccd22ce0ccff11f3d73ffb1eedb5895c
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'sta_info'
Change-Id: Ibb13c1496ea1dd5bc3b024b99414ac8d72db3be6
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'temperature'
Change-Id: I8f31d59be9954d3ffe1ff7c11d16dd24b9e2644d
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'monitor_mode_channel'
Change-Id: Ic207d6e29c14a0b33ed4982d533a78729d32a4ba
CRs-Fixed: 2731064
Rename file name and modify function names to keep it inline
with sysfs attribute name 'channel'
Change-Id: I9c73e572bdb80edc3431180448dffd9843d6a720
CRs-Fixed: 2731064
ICNSS2 platform driver is used for moselle and adrastea which uses
IPCI and SNOC PLD layer, respectively. Add support to enable both
for ICNSS2 based to target flag.
Change-Id: I06fbacade99b09c9ea7347aa28e10968eaeedaa8
Prevent wow if TDLS is started, allow wow if TDLS link disabled. This
feature is enabled only if lithium plaform isn't drv supported.
Change-Id: Ie66d62cb139fe9a1d292925a78f2dd861f16ef69
CRs-Fixed: 2716922
This reverts Change-Id: I11164995061ee057dfcb3abaef2af2f2d33bfd23.
We need the override configuration in defconfig file. The reverted
change actually disabled the override mechanism. Revert this
change so that the override config will take effect.
Change-Id: I0ffcdcb112e4054dbc2961ba414371fbe5a9e1c3
CRs-Fixed: 2714158
Some of the post processing tools need high resolution timestamps in the
build tag to differentiate WLAN driver modules in the same build. Add
current time with nanoseconds rounded to the first 6 digits, which is
microseconds. Also fix the 'date' command format.
e.g. date -u +'%F %T.%N %Z'
2020-06-25T17:40:43.919224370 UTC
Change-Id: Ie2a8af4dad2aead5738a4c710a201fe9674999f7
CRs-Fixed: 2719008
Enable compilation of the connection manager roam files with
Kbuild changes.
Add new API to store and retrieve the firmware scan channels at
mlme. Also add initial support to post SET_PCL command through
lim, so that it is not sent before ROAM init command.
Add changes to restrict connection of the 2nd STA to
channels on the other band of the 1st STA connected band.
This is done by filling only the allowed band channels in
the scan filters for the 2nd STA connection. If only
1 STA is active, it is allowed to connect on any band.
Add header gaurds for missed header files:
wlan_cm_tgt_if_tx_api.h
target_if_cm_roam_offload.h
Change-Id: Id2bce12b9663ed635ea46164169b088461aab870
CRs-Fixed: 2720341
