The change I3d49c72a31d142ef3b14b439af2ae4cd8be059ea adds support
to append the vendor IEs received from userspace to assoc request.
But this also fixes a memleak in mbo IE handling. It's better split
these two as the feature(appending vendor IEs to assoc request)
may not be needed on all branches but the memleak fix is needed on
all the builds which support MBO.
So, revert this change and raise these as two separate changes.
Change-Id: Ia6423bb43b2ac294541c2485f5ed45d14af6553d
CRs-Fixed: 2851356
Add support for below TWT commands to be sent as asynchronous
commands from userspace:
1. TWT teardown
2. TWT pause
3. TWT resume
Change-Id: I1989fe153cc8a482a9616a7f6879de3b92ef82fb
CRs-Fixed: 2847143
In order to resolve compilation issues with kernel 5.7+, add
conditional wrappers for pm_qos_notifier functions.
Change-Id: I7d6fad84f54f62f4a8d4ed68e86a1909e2eca243
CRs-Fixed: 2849793
In moselle, the runtime suspend and wow resume sync logic has
been added without any condition, since hastings is doing APPS
side PCI bus suspend which cannot be reverted on suspend failure,
so doing this sync logic only if wake irq type is CE interrupt.
Change-Id: I07dc5a99d0661fe1ef81e7a46e7053244edf8eb6
CRs-Fixed: 2851261
There are few API calls missing for connection manager
connect, disconnect response handling.
Add these missing function calls for connection manager.
Change-Id: If3f4bf42d0979ac36a1413e5fc4176c41d5b8f8e
CRs-Fixed: 2851144
Acquire connection list lock in policy mgr before update the
entry. The "conn_index" maybe changed for a connection entry
if other connection is up or down.
Fix by acquire connection to protect the whole "update" operation.
Change-Id: I91e82e74884ef32e83e0c4105e88bafe8d99db3d
CRs-Fixed: 2848209
Subscribe for offload Tx data wdi event and process offload Tx
data packets and post into mon thread for packet capture mode
Change-Id: Ic61043b8461eed4be5e8dc8d41baca2574224a90
CRs-Fixed: 2845598
Cleanup the struct sCsrNeighborRoamControlInfo and move params in
vdev ext object.
Change-Id: If5a490c68137622838afc831a4da0e1da7fa49c4
CRs-Fixed: 2850991
Fill dot11mode and cb mode according to the
bss description and IEs in LIM layer itself.
Change-Id: I55cdeffdd55cfc1787a2929b349aea25f499499f
CRs-Fixed: 2846126
The command should not be sent when device is in monitor mode.
But it is allowed in mission mode.
Change-Id: Ic21a8244425315577e7f0b2423c4fe6c5ac42702
CRs-Fixed: 2847777
Reduce excessive logging for roaming path to reduce latency.
Also remove function and line prints in roam debug related
logging.
Change-Id: Ida6fc55886c944126720f8bdd4b944765426ccc6
CRs-Fixed: 2847773
Unsafe channel list event does not change the current channel list.
Hence there is no reason to set the channel list again in wiphy and
inform the kernel. Thus, do not send regulatory event for unsafe
channel list.
Change-Id: I68d60fb412b4664430a9cdefa354fac4070bba7a
CRs-Fixed: 2788194
TWT HDD callbacks are registered dynamically when each TWT
command is received from userspace and unregistered while
sending response. This design was in place considering the
existing TWT commands are synchronous and multiple back to
back TWT commands will not be received. But now the TWT
commands from userspace can be received asynchronously.
So register the TWT callbacks statically during start modules in
wlan_hdd_twt_init().
Change-Id: I7dd9333c330a90fca421a2cc2574b2db76536e96
CRs-Fixed: 2830644
Add support for below TWT setup additional parameters:
Minimum TWT wake interval
Maximum TWT wake interval
Minimum TWT wake duration
Maximum TWT wake duration
Make the TWT setup command handling as asynchronous.
Send QCA_NL80211_VENDOR_SUBCMD_CONFIG_TWT event to
userspace when add dialog complete event is received
from firmware.
Change-Id: Ia56bbecd04e0c02a55dc1a7f43ee533a85f82f1d
CRs-Fixed: 2842895
Add legacy pointer in connection manager context to use for RSO
and other connection manager legacy operations.
Change-Id: Ibc665f53d77aebb3f248fedbdffd1cfe86492b25
CRs-Fixed: 2845980
Currently there is no sanity check for connected profile
which may lead to NULL pointer access.
To address above issue, add sanity check for connected profile
in association completion handler.
Change-Id: I2ed3d65287f4ea23cdf9c6c630b5e97e2c42c6be
CRs-Fixed: 2847694
Currently, host driver is checking for concurrency while handling
the pre_cac request. pre_cac adapter won't be deleted until SAP is
stopped. As a result the second pre cac request for the same SAP
will be dropped due to this concurrency check.
To avoid this, Don't check for pre cac concurrency if the pre cac
adapter is already exists.
Change-Id: I780c6310cf819da1a2f5c7c93590ccb1b544e7a4
CRs-Fixed: 2848736
In pmo_core_configure_dynamic_wake_events vdev reference is acquired
and its not released leading to the reference leak, leading to
vdev destroy timeout.
Release the vdev reference to resolve the issue.
Change-Id: Idd3bcb366f211e037ede278c91d6bcefd4165651
CRs-Fixed: 2850076
Subscribe for Tx data wdi event and process Rx data packets
and post into mon thread for packet capture mode
Change-Id: I1a2930110bebc152db32cb2c1f1bc1120fc29755
CRs-Fixed: 2845597
Subscribe for Tx data wdi event and process Tx data packets
and post into mon thread for packet capture mode
Change-Id: Id4c231ce8f32c45f579289b37cb810581c6ab31b
CRs-Fixed: 2845593
Remove hdd_objmgr_get/put_vdev api and use new
hdd_objmgr_get/put_vdev_by_user api to take reference of vdev with
component dbg id.
Change-Id: Ic0174a02e7d8d74506b03e04a4ae0aa7f28dad5e
CRs-Fixed: 2846706
Currently host driver does not free the memory for radio stats
if there is a timeout which may lead to unexpected behavior.
For example if there are multiple radio stats events from fw
and if it receives only one event and does not receives next
events in that case host allocates the memory for the channels
received in the first event and does not free this memory in wma
as it expects remaining events, since remaining events will not
come host gets timeout in hdd and memory in wma is not freed.
when host issues next command for the ll_stats it receives the
response for this command and as memory is already allocated for
channel stats for the previous event it combines this new response
with the old response which results in unexpected response to the
userspace.
To address above issue, add mem free logic to free the memory for
channel stats at wma.
Change-Id: I6735f8c282c4205c11548aabe3c8e269e81e4e54
CRs-Fixed: 2813478
Make CONFIG_MAX_LOGS_PER_SEC configurable because some platforms would
like to print more information in dmesg in some situations, like FW is
crashed in some CE projects.
Change-Id: Ib12854a7254afe5ace07c616a21400e446a80d4d
CRs-Fixed: 2838214
HW assist is a FW feature and it is enabled by default. But there is
no provision to disable/enable this feature based on requirement.
To address this, add INI param to enable/disable HW assist feature
in FW.
Change-Id: Icdc4a842be4d5c6991a785ee270f61ba87fcfe79
CRs-Fixed: 2841346
Configure TWT SAP PDEV count using CONFIG_WLAN_TWT_SAP_PDEV_COUNT
and SAP STA count CONFIG_WLAN_TWT_SAP_STA_COUNT for QCA6490
Change-Id: I74ef054d9cb64ccf66d7e1e788a8cc75aec70cb9
CRs-Fixed: 2843660
Currently, active NDP sessions are tracked on the platforms
where NAN concurrency handling is supported by host through policy
mgr. Roaming is disabled when an active NDP session is present and
re-enabled when the last NDP session is teardown. But this tracking
is not supported on legacy platforms(which don't advertise either
WMI_SERVICE_NDI_DBS_SUPPORT or WMI_SERVICE_NAN_DISABLE_SUPPORT) as
policy mgr based tracking is not available.
So, disable roaming when the first NDP connection happens and
re-enable when the last peer is departed from HDD APIs in such
legacy platforms.
Change-Id: I6309af12eab9222dc34a79566f7830b7763826de
CRs-Fixed: 2846541
