* changes:
Release 5.2.0.138N
qcacld-3.0: Add null check for qdf_ctx in hdd_configure_cds
qcacld-3.0: Add support to configure avoid acs freq list
qcacld-3.0: Remove redundant init and check in policy_mgr_skip_dfs_ch
qcacld-3.0: Advertise max BA buffer size in HE mode
wlan_ipa_w2i_cb is notify cb for IPA RX terminated
scenario and therefore it is invoked on a per-packet
basis.
qdf_op_protect and qdf_op_unprotect leads to ~100mbps
througput degradation for IPA RX terminated scenario
on MDM platforms. Thus remove qdf_op_protect and
qdf_op_unprotect on MDM platforms as a temporary
workaround to unblock releases and meet KPI. Note that
this will be revisited.
Change-Id: I1cab0581288456662ee4aa5d63df1b0f1213436b
CRs-Fixed: 2469073
Add ini gBtScoAllowWlan2GScan to support BT SCO-WLAN coex.
Using this ini can control whether allow wlan 2g scan or not
when BT SCO connection is on.
Change-Id: Ia63b1ff92e75937487827c34bca1d2e1c289962d
CRs-Fixed: 2464679
When measurement duration is given as 0 in beacon report request
driver should not send any beacon report in response and set
refused bit in action frame. Add this condition to beacon report
request processing.
Change-Id: I280824565aa5cda765151acbb67ab0d6574853d7
CRs-fixed: 2481166
Flush the reject ap list from the BLM when the user does
a explicit wifi off from the UI to ensure the user is able
to connect next time the wifi is turned on.
Change-Id: Ia8cdd6aa7e3357fc0def100cb13c6e25c1e0a62e
CRs-Fixed: 2470087
Currently in function hdd_configure_cds the driver is passing
the pointer from cds_get_context to ucfg_ipa_uc_ol_init without any
NULL check. This pointer later then gets dereferenced which can cause
null pointer dereference.
To solve this, added a null check before calling ucfg_ipa_uc_ol_init
Change-Id: Ie0d8e103c9eeac76d285c4b3870c3c4ea9172dc6
CRs-Fixed: 2462711
Currently there is no ini support to configure frequencies
which needs to be avoided for the acs channel list which
may allow SAP to come up on a channel which is not preferred.
For Example there are many legacy clients which supports
2.4GHz but don't support channel 12 and 13 (or does not have
the capability to detect country change where channel 12 and
13 is valid).
In that case, if SAP comes up on channel 12/13, those legacy
clients won't be able to connect to AP.
Hence, Add a feature flag and ini to configure the frequency
list which can be avoided during acs.
Change-Id: Id106b38228f837ba056eb916004dc012e919ddd2
CRs-Fixed: 2472004
Remove redundant initialization for local variable dfs_master_capable
and always pass check for skip_dfs_channel in policy_mgr_skip_dfs_ch.
Change-Id: Icf3ca4e297a54646114d414f1d0bd8543e59ea37
CRs-Fixed: 2482890
The default addba buffer size is set to 64 and HE supports
256 BA bitmap.
Set addba response frame BA buffer size to max BA buffer size
(256) in HE mode.
Change-Id: I74db45874997cb3f3e758c89d7e95d72c27ee13f
CRs-Fixed: 2481484
In case of WMA_DEL_STA_REQ timeout for type WMA_DELETE_BSS_RSP,
directly del_bss response is posted to lim without clearing the
bits like bss_status in wma. This can later lead to failure
in del_sta_req of the self sta and self sta peer leak in the
object manager.
Hence, set the bss_status from started to stopped in case
of del_bss failure.
Change-Id: Ic68e6b7a59959392772fc2821d31a054778fe66b
CRs-Fixed: 2478379
It just support to tx probe respnse and action frames currently. So
add this change to support to tx probe reqest frame.
Change-Id: I4899eeca80958990aff2ec5eac3226f9a37ccbf3
CRs-Fixed: 2481346
Currently the driver sends the update cfg RSO command to the
FW, which updates the channel list to which the FW should roam
to find other BSSIDs.
Before the connection is established all the channels are sent
to the FW, but after the connection is established only few
channels are present which reduces the scan time, and reconnection
time to the new BSSID.
But when the FW gets the new channel list as part of RSO after
th connection, it appends the new channels with the previous
list that it received, and hence scans all the channels when
roaming happens, which in turn consumes power, and reduces battery
life with no extra advantage.
Fix is to reject the update cfg command in the disconnected state
as whatever updates are done are cached in the driver, and are
always sent to the FW after the connection is established.
There is no point to send the updated cfg params everytime,
if the driver already sends the command just after the connection.
Change-Id: I19caf194edc1dc038abdfb5b03e69afba48ffc89
CRs-Fixed: 2469350
Move definition of HIF_CONFIG_SLUB_DEBUG_ON to driver Kbuild,
to cleanup CONFIG_MCL/CONFIG_WIN dependency.
Change-Id: I3f4abf546c5c9fe08531a14234f149a82cd14bf1
