wma_validate_handle() function already takes care of logging the
caller function name in case of any error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
Change-Id: I65f87eee08ad87579ea3cdeab0a6db2c2db02fb7
CRs-Fixed: 2833851
Introduce wma_validate_handle() with the caller function name
embedded in it to validate the WMA handle and log incase
of error. Calling functions can avoid logging in case
wma_validate_handle() returns -EINVAL. This reduces logging and
thereby memory foot print.
Change-Id: If38436a590d8b950509bde40468b9ddc3cf33e8d
CRs-Fixed: 2833040
Previous logic:
While reporting beacon reports a maxmium of
7 Dot11fIEMeasurementReports are sent in one
mgmt frame.
New logic:
Calculate the max number of frames that can fit
in one mgmt frame and add them to the report.
Change-Id: Ic413c94ea1f012a647dfd7cd21b13bc123ebfd97
CRs-Fixed: 2809395
Firmware sends peer create confirmation to detect duplicate peer
on other vdev. If the status field in the
wmi_peer_create_conf_event_fixed_param is 0, peer creation is
successful.
Add support to handle the peer create confirmation command for
sta mode. For roaming scenario, the peer will be internally
created by the firmware, so bail out after creating object
manager peer/datapath peer without sending the peer create
command similar as the current implementation.
For SAP/P2P Go mode the legacy peer create path will be used.
Proceed to do post linkstate change if status is success, else
do vdev stop and indicate failure to upper layers
Change-Id: I0abbd70dd509f2b9afa8d4d7db1774e289d1e021
CRs-Fixed: 2747870
cds_get_context() function already takes care of logging the
caller function name in case of any error.
Hence there is no need to add the error log again.
Getting rid of these unnecessary logs reduces driver memory footprint.
CRs-Fixed: 2815522
Change-Id: Ibb17fb043d6addaf0fa86aeb882178ef27535162
Since new rso ROAM_OFFLOAD_V1 path is enabled, remove
the old rso path code for wma layer related files.
Change-Id: Ie4639a6f04877aa41046706118936560200162a6
CRs-Fixed: 2808064
If FT roam with LFR2.0 enabled, pre-auth/reassociate happen in host,
PTK will be installed early after pre-auth negotiation, so need put it
after association complete, but currently we only save PTK key material
and don't install it.
Because crypto was converged and original eWNI_SME_FT_UPDATE_KEY has
been removed, move delayed installing key after association complete
notified at hdd layer, rather than in function wma_add_sta_req_sta_mode
at wma layer. And remove useless code related with original FT key
installing.
Change-Id: I3bc52b65d17342edab755f7904d743c3433f99ce
CRs-Fixed: 2768307
There is customer requirement that once wifi chip overheat,
we should switch the tx chain mask to 1X1 to cool down the
chip instead of halting the tx completely.
Add new INI gThermalMgmtAction to configure thermal mgmt action
with default 0. The valid thermal mgmt action INI value is defined
as enum thermal_mgmt_action_code. To set it to 3 -
THERMAL_MGMT_ACTION_CHAINSCALING to meet customer requirement.
Change-Id: I88b1237fae1f476ad9ff0e7b5a469ec314a42bf9
CRs-Fixed: 2765289
Add RSO logic to send roam trigger from target if along with
some optimization to move old logic in ROAM_OFFLOAD_V1.
Change-Id: I38e7fb4f8873328097df7e3a25d6c709f8d69b33
CRs-Fixed: 2765155
In LFR3 Handoff failure case, data path peer teardown is not
done prior to cdp peer delete and this causes bug_on to be
triggered during cdp peer delete.
Fix is to invoke wma_remove_peer() in vdev stop response path
with ho_failed flag set.
Change-Id: I112b2e8fe1792a967c48138113766b649ee1ba26
CRs-Fixed: 2760180
Add changes to handle transition to the 2 new states:
1. Roaming in progress: Switch to this state when roam
start notification is received from firmware.
2. Roam Synch in progress: Switch to this from RSO
STARTED state if roam synch indication event is received
from firmware. Change to this state is also allowed in
RSO STOPPED state if supplicant disabled roaming on that
vdev - to allow roam invoke to be processed.
Also query the state machine to get the roaming status instead
of using discrete flags at various layers. Clean the redundant
roaming in progress, roam synch related flags.
Change-Id: Ide20a30d9d8c20a96d8bba70367b51b8643cae09
CRs-Fixed: 2725443
Send Vdev pcl command on both connected STA vdev when sta+sta
roaming is enabled. Handle below cases:
1. When 1st STA is connected send PDEV pcl command for the
first sta. Set pcl_vdev_cmd_active false.
2. When 2nd STA comes up, Set pcl_vdev_cmd_active to true,
send vdev PCL for 1st sta before enabling roaming(disabled
as part of the connect on 2nd STA).
3. For second STA force dbs connection when
enable_dual_sta_roam_offload ini is enabled. Set the channels
of the 1st connected STA band as invalid and remove these
channels from the scan filter.
4. On disconnection of 2nd STA connection, clear the vdev
PCL sent for 1st STA and then send PDEV pcl command.
Also make changes to send set PCL command after roam init
is done before RSO start is done at firmware to avoid assert.
Post set pcl command from sme/csr through lim/wma/wmi to avoid
the above condition.
Disable roaming on the vdev before sending set PCL command to
avoid roaming on undesirable band & channels.
Change-Id: I6bd869015b7248fe5c5c90b6e2fa0174995be197
CRs-Fixed: 2725360
Enable compilation of the connection manager roam files with
Kbuild changes.
Add new API to store and retrieve the firmware scan channels at
mlme. Also add initial support to post SET_PCL command through
lim, so that it is not sent before ROAM init command.
Add changes to restrict connection of the 2nd STA to
channels on the other band of the 1st STA connected band.
This is done by filling only the allowed band channels in
the scan filters for the 2nd STA connection. If only
1 STA is active, it is allowed to connect on any band.
Add header gaurds for missed header files:
wlan_cm_tgt_if_tx_api.h
target_if_cm_roam_offload.h
Change-Id: Id2bce12b9663ed635ea46164169b088461aab870
CRs-Fixed: 2720341
Replace obsolete WMA_LOGA() macro with wma_alert().
In some error cases, usage of wma_alert() is incorrect and
hence use wma_err().
Change-Id: Ife02033c4f981c31f5e6b165d5e8961e2ce1f9d8
CRs-Fixed: 2716176
Truncation will happen when assining an association id over 256
to the u8 'aid' of struct wma_txrx_node.
To avoid such issue, change the type of 'aid' in struct wma_txrx_node,
from u8 to u16.
CRs-Fixed: 2713427
Change-Id: If360c017700aadaf9f2d3216601a011704f68180
chan_freq and mhz variable represent the same thing so use chan_freq
instead of mhz.
Change-Id: I4162504562c30ece71f5ebc465b1af3a048b01b2
CRs-Fixed: 2696795
Removed all the API realted to FEATURE_WLAN_RMC
as well as related SME/WMA code.
Change-Id: Id471ccabcfd183fbcc7ff4e4953991f9e1551526
CRs-Fixed: 2686364
During tdls peer delete, wmi command WMI_PEER_DELETE has been
send but later on from driver wmi command for peer update is
send without checking for peer reference before sending to fw.
Fix, to check for peer reference before posting the cmd to fw.
change-ID: I216d1ad726af3369c227ae566e22949cadb8300c
CRs-Fixed: 2667811
While sending tx frame WMA_IGTK_KEY_INDEX_4 is used to get the
igtk key, but the WMA_IGTK_KEY_INDEX_5 is also valid igtk key index
and thus if igtk index passed is WMA_IGTK_KEY_INDEX_5 the get igtk
always fails.
So during set key store the igtk key index and use the same to get
igtk key.
Change-Id: I5c3baf1231472e7d9aeb2f762285befc9100c858
CRs-Fixed: 2661204
Currently QDF_MAX_NUM_CHAN/POLICY_MGR_MAX_CHANNEL_LIST aren't aligned with
NUM_CHANNELS, these unalignment may cause some potential OOB access.
So replace QDF_MAX_NUM_CHAN/POLICY_MGR_MAX_CHANNEL_LIST with NUM_CHANNELS
to keep unified.
Change-Id: Ib6c81a3979f2fd29ba1ec678f018a6704b599385
CRs-Fixed: 2644066
Handle send delba indication from DP. It will help DP to
do aggregation tid management.
Change-Id: I18455107ef8d042644efc8ce549a104612eec05c
CRs-Fixed: 2637485
Presently vdev delete is sent to firmware 1st and the object manager
vdev delete is deleted after all the references are released.
With this change the vdev delete is sent to firmware when all the
references are released and the vdev delete is sent to firmware via
the object manager vdev delete notification.
Change-Id: I67bea0d2b2a0d2d9eb4602e5d0b8bbdcafdd4d26
CRs-Fixed: 2618278
Send vdev param command to FW for STA vdev to set the packet
capture mode. Send the command only if packet capture support
is enabled.
Change-Id: Ifed2431882b1f7d2869771e812daa5bcd5dc17e9
CRs-Fixed: 2619314
After deauth/disassoc, roaming is triggered by the firmware and
if roaming failure occurs before handoff is started, then
firmware sends the WMI_ROAM_EVENTID event with deauth reason.
Currently unspecified reason is sent to the upper layers for
every emergency deauth roaming failure.
Extract the reason code from the deauth/disassoc frame sent by
the AP, received in WMI_ROAM_EVENTID.
Change-Id: I461a38e8a8e60fa26b2ace3f54a6f8208f00838d
CRs-Fixed: 2611473
Add support to fallback the PMKID generation from firmware to
wpa_supplicant.
In FIPS Enabled case, for roaming Firmware sends PMKID
request to host as firmware is not supposed to do crypto
functionality with FIPS enabled. Once the roam candidate
selection is done in the firmware, it sends the
WMI_ROAM_PMKID_REQUEST_EVENTID. After receiving this event
the host driver triggers an event to wpa_supplicant using
NL80211_CMD_PMKSA_CANDIDATE for PMKID generation. Then
wpa_supplicant responds with PMKID to host using
NL80211_CMD_SET_PMKSA. And host updates the wmi pmk cache
and indicates the firmware via WMI_PDEV_UPDATE_PMK_CACHE_CMDID
wmi command.
Change-Id: I7d33a2b92f97260fa5a7e742b6f877adc7eced55
CRs-Fixed: 2512955
Currently many layers store the datapath handles i.e.
pdev and vdev handles and use them for passing as an
argument to the CDP APIs. This gives way to possible
race conditions, where the datapath handle provided by
the outer layer might be a stale pointer, which in turn
leads to unexpected results.
Remove the storage and usage of all the datapath handles
from the layers currently using them.
- cds_context
- vdev objmgr
- pdev objmgr
Change-Id: Icf24bd3792af203d1a06e153f0badd6e7405559f
CRs-Fixed: 2602199
Send vdev param command to FW for STA vdev to set the packet
capture mode. Send the command only if packet capture support
is enabled.
Change-Id: I014acfc5d97a2bf00831259b9811b3c5bc7610a1
CRs-Fixed: 2528554
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
Also remove the ops which are used to store
and retrieve such handles, that no more needed.
- register_peer
- clear_peer
- change_peer_state
- peer_get_ref_by_addr
- peer_release_ref
- peer_state_update
- get_vdev_by_sta_id
- register_ocb_peer
- get_peer_state
- get_vdev_for_peer
- update_ibss_add_peer_num_of_vdev
- remove_peers_for_vdev
- remove_peers_for_vdev_no_lock
- copy_mac_addr_raw
- add_last_real_peer
- is_vdev_restore_last_peer
- update_last_real_peer
- peer_detach_force_delete
Change-Id: I5134ca882f5fcf0e5941317e48712717eddb58fe
CRs-Fixed: 2541708
When CONFIG_WLAN_FEATURE_11W is disabled, compilation of lahaina still fails
in a few areas. Even though CONFIG_WLAN_FEATURE_11W should be always be
enabled now, add appropriate fixes for the compilation issues in the event
that CONFIG_WLAN_FEATURE_11W is disabled.
Change-Id: I1743678df6b66a63160795374de7969f313f55d9
CRs-Fixed: 2601362
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in WMA layer.
Change-Id: If70fc5cb01f2a0123030c92410e126ce8078e1c6
CRs-fixed: 2593526
Currently cdp ops are given pdev/vdev/peer
handle as its arguments which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_data_tx_cb_set
- txrx_mgmt_tx_cb_set
- txrx_mgmt_send_ext
- txrx_pdev_attach_target
- txrx_pdev_detach
- txrx_vdev_attach
- txrx_vdev_register
- txrx_vdev_detach
- txrx_peer_create
- txrx_peer_delete
- txrx_peer_delete_sync
- txrx_fw_stats_get
- txrx_get_vdev_from_vdev_id
- txrx_pdev_set_ctrl_pdev
- txrx_pdev_attach
- txrx_get_vdev_mac_addr
- txrx_pdev_post_attach
- txrx_pdev_pre_detach
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: Ib8b0b1edd63e7c3f8813b11ca26b50ec121fe255
CRs-Fixed: 2541459
Presently, during Subsystem Restart(SSR) the object references
are not released cleanly, invoke stop adapter during the SSR
to have common functionality between the netdevice going down
and SSR.
Change-Id: I2980379022f62ef27dea92868c8033c087544d50
CRs-Fixed: 2587443
Cleanup peer id from the callers of cdp APIs from
where the peer ID was passed, and use mac address
instead to identify the STA.
Change-Id: Ie6dcae77e959439a71c11b1a2fa0daddcaa6e719
CRs-Fixed: 2529822
The ANI level determines how well the device is coping with interference
in the wireless environment. Add support in the driver to query the ANI
level from the firmware and populate it for userspace entities to use.
Change-Id: I54934f670aa11737e11eca4d64e12f9dffb4f430
CRs-Fixed: 2554674
target_if F/W event handler is moved from wma to cmn part per
MCL/WIN converge requirement.
Change-Id: I583059190827c9aed8d8089412a4cfac92ddf4c9
CRs-Fixed: 2554859
