Adding flags to support FR of Modularization of
monitor mode for Hastings to avoid compile issue.
Change-Id: I7be63661dde17179c8eb5fb5e5fd9b2dc0c9f4af
CRs-Fixed: 3011407
Enable CONFIG_MOBILE_ROUTER SA415M Platform for Rome Genoa
and Hasting, same as SA515 Platform
Change-Id: I7f0899c562ea8447296f3ddd1b237ea0d6a1b962
CRs-Fixed: 2924075
Enable DP pending memory flushing by macro WLAN_DP_PENDING_MEM_FLUSH.
DP references of the peer will be removed once we receive PEER
unmap message from the firmware. If the firmware has failed to
send the peer unmap message (due to an assert in FW), then the
peer entries will remain the inactive peer list and will trigger
a explicit QDF_BUG() during driver unload.
Force clean the inactive peer/vdev list during driver unload in such
cases.
Change-Id: I2565cd4f1a4afea8536bcca86147d6fa028be554
CRs-Fixed: 2988733
As hardware based on CONFIG_LITHIUM feature flags enable/disable in Kbuild
file were removed in commit "f06df4c", use CONFIG_<FEATURE_FLAG> from
qca6390_defconfig file to enable DP feature flags.
Change-Id: I8051fc789c70766bb4519c345e04c278864e2f1b
CRs-Fixed: 2984207
Enable the wlan IPA events for P2P GO/CLI mode for qca6390 to avoid RX
packets get dropped due to IPA interface context is not created.
Change-Id: I1e2c5e4085874280779d8d8d07efdb1f33e6d90b
CRs-Fixed: 2853271
Do not reset CONFIG_IPA3 if target is QCA6390 to avoid mismatch between
Kbuild & qca6390_defconfig.
Change-Id: Iffe2976576a653a145a15cf798737569be116ec3
CRs-Fixed: 2946663
Enable SMMU S1 unmap config flag to do SMMU unmap of
IPA TX/RX doorbell registers as part of IPA cleanup.
Change-Id: I2e6e5312fb54841fde89db64071ded965c1c1bd1
CRs-Fixed: 2855099
HST/Genoa/Rome support TX_AGGREGATION_SIZE, need enable it.
TX_AGGREGATION_SIZE is introduced in
change: I9e49ad5218f913f116cf4472f768f572740f14df .
Change-Id: I63fc729f3daf2b1757c5eb2fb839ed22ebce359a
CRs-Fixed: 2926281
Set CONFIG_WLAN_STREAMFS depend on CONFIG_RELAY,
which can support write CFR data to the node:
/sys/kernel/debug/xxx/cfrwlan/cfr_dump0
Change-Id: I2a9b1920c55ca16277282d5430ad3f3de5c4795d
CRs-Fixed: 2902315
Remove all of the conditional compilation for pmf since this
feature is mandatory for future scope from protocol point
of view.
Change-Id: Id3a2127e9ecb343ad2a0354dcbc331c22167d7fb
CRs-Fixed: 2852630
1) Enable skb accounting for rm/gno/hst on auto platforms.
2) Remove an unused ini item name.
Change-Id: I19f8b70a409bb6485eea08fdbdf3a8e34839bf59
CRs-Fixed: 2872544
Enable the RX_DESC_MULTI_PAGE_ALLOC for qca6390_defconfig to enable the
memory allocation of RX descriptors using multiple pages instead of large
contiguous memory to fix potential memory allocation failure when system
is in the heavy memory fragmentation.
Change-Id: I611850374dce62f8c326b16f95cc162fec32c5e3
CRs-Fixed: 2852534
Make CONFIG_MAX_LOGS_PER_SEC configurable because some platforms would
like to print more information in dmesg in some situations, like FW is
crashed in some CE projects.
Change-Id: Ib12854a7254afe5ace07c616a21400e446a80d4d
CRs-Fixed: 2838214
Use the macro CONFIG_ARCH_SA515 instead of CONFIG_ARCH_SDXPRAIRIE
for SA515 projects.
Change-Id: If4d7d62a64c509fa69c2c59890ffaaf7b763e01c
CRs-Fixed: 2832357
With perf kernel config file, it usually will not
set CONFIG_DEBUG_FS=y, which will cause implicit
declaration of function 'hdd_debugfs_process_mib_stats'
such compile error. And MIB STATS feature also depend
on debug fs, so enable it as long as CONFIG_DEBUG_FS=y
Change-Id: Ice1ddce07eb5eb251e766d3952ca15b00321b3b2
CRs-Fixed: 2829413
ext-wow feature never supported/tested on MCC, and there
is no known customer using this feature, so compile it out.
Change-Id: I3c79ebecd5b2a44cfa9339748bf8e94f596e71bd
CRs-Fixed: 2680331
Based on multi-clients test experiment, when AUTO SA8155+HST
works as SAP connected more than 8 Ref STA clients, it requires
increase in TX descriptors to burst traffic to each Rx device,
or flow control happens to stop host tx queue frequently for
missing TX descriptors, can't get high throughput.
Change-Id: Ie2adbdd3bfece323d51d5e96fef6001c4e39c3f4
CRs-Fixed: 2703765
This reverts Change-Id: Iaf86c9da2a9946aac09867b5c46dcc79f1b5c37e.
That change fails build for GKI variant.
Change-Id: I6cd7322870023d245fe9d20250ceb0b5d738d214
CRs-Fixed: 2701642
Add support and use IS_ENABLED in code, if CONFIG_IPA3 config as
loadable kernel module.
Change-Id: Iaf86c9da2a9946aac09867b5c46dcc79f1b5c37e
CRs-Fixed: 2701642
To enable 11d feature, CONFIG_TARGET_11D_SCAN should be configured
independent of host 11d scan or target 11d scan.
Change-Id: Ieb5b3ff4217682fcc887aaaa1a22ec23cee33109
CRs-Fixed: 2679788
Removed all the API realted to FEATURE_WLAN_RMC
as well as related SME/WMA code.
Change-Id: Id471ccabcfd183fbcc7ff4e4953991f9e1551526
CRs-Fixed: 2686364
Currently CONFIG_WLAN_WEXT_SUPPORT_ENABLE is unconditionally enabled
in many defconfigs, including the default defconfig, but this leads to
build failures when WEXT is not configured in the Kernel. So update
the defconfigs to enable CONFIG_WLAN_WEXT_SUPPORT_ENABLE only when
CONFIG_WIRELESS_EXT is enabled in the Kernel.
Change-Id: Iecfd4e899c2b09c489547dd1a8ff70f71983853f
CRs-Fixed: 2620792
1) Add optional code compilation for Dynamic ACS(DCS) module.
2) Add Kbuild option(CONFIG_DCS) to control whether DCS code
should be compiled.
Change-Id: Ia594db21fef43a8ef6e90afb4191f50ba42f74b7
CRs-Fixed: 2604529
Fix insmod Genoa wlan module failure for:
wlan: Unknown symbol wlan_set_vdev_crypto_prarams_from_ie.
wlan_set_vdev_crypto_prarams_from_ie is defined in
wlan_crypto_global_api.c
UMAC_CRYPTO_OBJS := $(UMAC_CRYPTO_CORE_DIR)/
wlan_crypto_global_api.o \
ifeq ($(CONFIG_CRYPTO_COMPONENT), y)
OBJS += $(UMAC_CRYPTO_OBJS)
endif
The crypto component is always required after convergence
between WIN/MCC, hence just unconditonally set
CONFIG_CRYPTO_COMPONENT := y in Kbuild.
Remove CONFIG_CRYPTO_COMPONENT := y in defconfig of each wifi
chip: default_defconfig, qca6174_defconfig, qca6390_defconfig.
Change-Id: Id0abe80673d59d9274401f1304b5ce1d906624eb
CRs-Fixed: 2596124
CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY may be not set yes, if only
CONFIG_ROME_IF is set pci in external file. Because it is set yes
only when CONFIG_HIF_PCI set yes, however, CONFIG_HIF_PCI set yes
after it. For example, in file default_defconfig, CONFIG_HIF_PCI
set to yes on line 465, however line 311 checking CONFIG_HIF_PCI
to enable CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY. So, line 314 can't
be called, CONFIG_WLAN_TX_FLOW_CONTROL_LEGACY is not set yes.
Change "ifeq ($(CONFIG_HIF_PCI), y)" to "ifeq ($(CONFIG_ROME_IF),pci)"
to avoid it.
Change-Id: Id324cdb99d6ee2d20bc00e698836c3ea4c5e0a05
CRs-Fixed: 2496110
On HST, only enable LFR3
On Rome, only enable LFR2
This change is for auto platforms
Change-Id: I67bd5877060621e756668e925031fd134bc1a0c2
CRs-Fixed: 2544840
Enable direct buffer rx component in Kbuild since spectral scan gen3
based on this feature.
Change-Id: I8d44b35ca0d334917b3c052cc8ab4e47db34e4a1
CRs-Fixed: 2505676
Insmod failed for:
wlan: Unknown symbol ol_cfg_set_tx_free_at_download (err 0)
wlan: Unknown symbol ol_txrx_soc_attach (err 0)
The 2 functions are only implemented on legacy platform like
Helium.
Fixed by copy config from default_defconfig to
qca6390_defconfig.
Change-Id: I5e8838c6653571507e6143c28ad6a0f7e7b228e9
CRs-Fixed: 2535963
Some target chipset support fw stats version 2, but we didn't enable
it in some configure file. Enable it in these configure files which
depend on chipset.
Change-Id: Ief8b87bdb466a1838e6a61928f0154868f0ff220
CRs-Fixed: 2524266
6 GHZ has introduced new set of frequency based APIs. Also there is
conditional usage of 6 GHZ band. Add configuration items for these.
Change-Id: I22703989ec7e6711af640f1f9d0afded46026b8a
CRs-Fixed: 2513098
The member of type_specific_data is not valid for ROME module. Add macro
protection for type_specific_data in the ath_pktlog_hdr to avoid offset
error when getting the msdu id info during processing pktlog TX info.
Change-Id: Icb8b95cef9a32732116522e4fc3b39067ff36037
CRs-Fixed: 2522277
Enable IPA3 in qca6390 for sdxprairie platform. The IPA
over gsi and smmu are also enabled to make IPA workable.
Change-Id: I5ce6b22dcc4a6678deb6a5ac2d712fb82b6c5bf3
CRs-Fixed: 2496838
Featurize DHCP indication for SAP and disable it
for QCN7605 as this feature is broken for HL
Data Path.
Change-Id: If1db649131d887a2aab18461187403b4b9a2c5b4
CRs-Fixed: 2496032
Currently ext scan is enabled by default in driver which
is increasing driver size significantly and ext scan
is not getting used anymore.
Disable ext scan with feature flag CONFIG_FEATURE_WLAN_EXTSCAN
to reduce driver size.
Change-Id: Id0fdeae6e6b71f53d3b73322aca659254d52cec8
CRs-Fixed: 2491452
Enable following special 4 ports concurrency for Auto HST
platform.
(SAP+STA) (2.4G MAC SCC)+(SAP+STA) (5G MAC SCC).
Change-Id: I6ab34606a98c1e4a670de63e12e54f2becd4d1d4
CRs-Fixed: 2457713
The functions hdd_sysfs_create_adapter_root_obj() and
hdd_sysfs_destroy_adapter_root_obj() are declared but not
implemented if CONFIG_WLAN_SYSFS is not defined but
CONFIG_FEATURE_BECN_STATS is defined. Do not enable
CONFIG_FEATURE_BECN_STATS if CONFIG_WLAN_SYSFS is not defined.
The monitor mode should not be supported by sdxprairie arch.
Change-Id: I583af70dfdba8f14e4967c805672ecd8a17640d1
CRs-Fixed: 2481850
CONFIG_CHNL_MATRIX_RESTRICTION should not be defined by default.
CONFIG_CHNL_MATRIX_RESTRICTION should not be defined by HST.
Change-Id: I36154976c4e106d9910977b5990f796b889eaf82
CRs-Fixed: 2476488
