For 4 core CPU system, Tx access can be made lockless by associating
one Tx ring per CPU. Three Tx DATA rings and one SW2TX command ring
can be used for sending data to Tx.
Change-Id: I6e38cad52dffa4e46ff2b736cd6b949d061fa2a4
Enable SW2TCL_CMD ring for data on QCN9000, QCA8074 V2/V1
and IPQ6018 targets.
Enabled 4th Tx ring for data enqueue to HW.
Transmit completions for packets from CPU0 and CPU3 are routed to
WBM2SW Completion ring 2.
WB2SW completion ring2 is mapped to CPU3.
Change-Id: Ied4c4704e1f8623e909ad45c547a611de26c7ec5
Memory optimization of unused TX rings by not configuring rings that are
not being used. Configure 2 rings for host in the case of IPA, instead
of configuring 3. If IPA is disabled then configure only 1 set of TX
rings for host.
Change-Id: I251606c728f3020a13e45e8c8386970c8a641f0a
CRs-Fixed: 2530572
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Change cmn_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I5716a87cad56b1dfe8dd56f193bbb6ff923a6af1
Add a check to drop unicast frame being sent to same originating
VAP after hmmc conversion of IGMP control packets
Change-Id: Ic25812a7848af793075a0cb483100ebcf59d85b2
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles, if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles, if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539811
Change-Id: I3080df033d6411d7078a322224b914bda2fddc0e
1. Remove vlan tag in tx and enqueue to hardware.
2. Add vlan tag in rx after peer-vlan_id lookup.
Change-Id: I932202540ac03cabdd20ffd4849fe759ea8a7abb
Make change to remove void pointer usage in DP cal client
instead use cdp opaque pointers.
Change-Id: Ie966ebb7b6bb937d4ee1d6dce3b040804e61ac37
Crs-Fixed: 2484412
Add code to remove void pointer usage for hal_srng
and use opaque pointer dp_hal_ring_t instead.
Change-Id: I6907f7376d7fe3c9180b8795bd96f49fead2ec64
CRs-Fixed: 2484404
Add code to use cdp_vdev instead of void pointer for
API dp_tx_send_exception and dp_tx_send_mesh
Change-Id: I63ca5a62c2a8cd6feb906181702888814650dfce
CRs-Fixed: 2480836
Tx completion stats should be counted per wbm ring on tx completion
and not globally. Similarly, rx stats should be counter per reo ring.
Change-Id: I1e4af0d38b23e60de78ca03316861db08ff0811a
Move WDS feature specific APIs out of common code
as these features are WIN specific. Keep the usage inside
common code under feature specific flags.
Change-Id: Id907a5e22c27fc47e8314449e154525684a27e85
The following changes are made
-Yield dp_rx_process if poll time exceeds
-Yield dp_tx_comp_handler if poll time exceeds
-Interrupt statistics to track various interrupt contexts and
corresponding interrupt masks
-Add poll times histogram buckets to NAPI stats
Change-Id: I8c7a6bbbb97c7b3dd1dde6ac3a97113c433086a2
CRs-Fixed: 2423879
Delay counters per TID have been implemented for following types:
1. Linux stack to hw enqueue delay
2. HW enqueue delay to tx completion delay
3. TX interframe delay
4. RX interframe delay
5. RX frame delay from ring reap to networking stack
Change-Id: I836596cbd878a43955c18b4981cb5b7b43d4df5e
VOW stats is an extension of regular stats to capture
all drops per TID. Delay counters per TID are also
included.
Change-Id: If6087f37b32cf9ae4bb405190a358ad3c9750dd2
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
remove all legacy TDLS code and switch to using the FEATURE_WLAN_TDLS
feature flag since that more accurately describes the code being
protected.
Change-Id: Ieef785844bd25b06604167eae2f52e39717f502f
CRs-Fixed: 2395694
Avoid memory fragmentation that happens during
attach-detach flow.
- Reuse transmit allocated static pool memory across soc up/down.
These memories are allocated during soc attach.
- Reuse DP source ring memory, DP soc context, DP pdev context
across soc up/down.
- Reorganise structure members of DP soc and DP pdev so that
we can zero out structure members across soc up/down
- Add cdp soc init/deinit and cdp pdev init/deinit that
will be active across soc up/down
Change-Id: I5732453f617bdc16995fda916b645c41845c3ecb
Add support to process HTT completions sent by FW for multicast/broadcast
frames sent in TQM bypass
Change-Id: If3fca3384156ce93f719bf15ef14b98ea4974f92
CRs-Fixed: 2301453
Currently peer reference is used with out taking any ref count.
In parallel context execution on different core peer reference may
be cleaned up in peer unmap event. So take ref count while using
the peer reference and decrement after done with it.
Change-Id: I02ca172cbdc4309fabd3bbbad00940826662bbd3
CRs-Fixed: 2301963
"(" character should not appear in macro parameter list. Remove
this illegal character to avoid compiling error.
CRs-Fixed: 2239574
Change-Id: Ie50feb5dacda52edb0b1a4fcdfd516e909c7bda8
Based on requirement from customer we have re-organised
AST specific and WDS specific code under different compile
time flags.
Change-Id: Icbb0dff7c2e7a2239d82c296468fa8d3e4f53021
On Firmware auto recovery , txdesc resources
might not be freed if f/w has not sent the
completion. Freeing those buffers in pdev
detach
Change-Id: I7d62258347f1fc9566fc8230564bcaf458ea4cc4
dp_tx_send_exception is an exception path that transmits frames
through FW by setting DP_TX_DESC_FLAG_TO_FW
Change-Id: Id6abfcd2bf060c4fe3aaca91634f3be501530a7e
CRs-Fixed: 2176814
Sending all frames to firmware will have high throughput impact.
Queue mesh frames also to TCL/TQM and send cloned frame to firmware
only if meta header information is changed to update meta header
information. Increased meta info size as per new ext2 header.
Change-Id: I89ff27994477a5637979a9cd6a397286144b2535
CRs-Fixed: 2162643
Tx ME descriptors used for Tx Multicast enhancement are not freed
in pdev detach path causing memory leak. Fix this by freeing
them in pdev detach path.
Change-Id: I902e7a829495871e3d0013a9942f86c02bbba80e
CRs-Fixed: 2168524
Add a division factor for number of tx completions to be accounted for in NAPI
budget. Fix the data type of budget to int to account for negative values.
Change-Id: I620af5537c5c1cdf3161da3a3c053a2c8bf777e8
CRs-Fixed: 2092526
Send peer create to NSS only when peer map comes for connected peers.
When peer map comes for WDS peers only update WDS peer specific entries.
Change-Id: I32d785180bcd1dae2703d40b55f4536685f10439
