Aux cable is detected as unsupported sometimes due to it being
detected as cross conn. Increase hph cross conn threshold to 350mV
so that it detects fine.
Change-Id: I87e4bd36f80d7cd62e06c76acf9c9d06bb6f148a
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
HPH PA pull down control is set to force ON instead of auto
due of which saturation/noise is observed in headset
playback at highest volumes. Set pull down control
to Auto to fix this issue.
Change-Id: I465588f46b04bbb32d84f76b8b5bedd2ef21bd2a
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
When current source mode is enabled, comparator auto
zeroing should be turned ON by HW. As rouleur codec HW
doesn't do this automatically, add this support
in SW to set the auto zero enable before FSM enable
and reset to auto once FSM is enabled.
Disable surge protection before ADC measurements
and change HPHL and HPHR thresholds while
identifying cross connection for proper
accessory identification.
Change-Id: Ib775de0f0bdb6c655a3c0eb4775276acfbca1e84
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Current source mode in rouleur does not work
properly leading to issues in button interrupts
and fake electrical removal interrupts.
Enable pull up mode instead of current source
mode to fix these issues. Modify the headset
max vref voltage to 1.7 volts and micbias
calculation logic.
Change-Id: If3e4a2fdcf080b07fe3c363b6eb6115f101b91f4
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Update PDM watchdog interrupt sequence for rouleur
codec. Add HPH PA gain registers in regmap and update
defaults. Update mic bias register bits and rouleur
version for ADIE RTC to work.
Change-Id: I1bbb41efcdd9a0a8b38fcd4beadbd5d639a4b858
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Update HPHL and HPHR sequence to avoid clicks and pops
by setting the LDIV and RDIV values in HD2
coefficients and increasing ramp time.
Change-Id: Ib47d14255a098511393b4b75392854c8b34dc0d3
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add rouleur codec support in bengal machine driver
to create codec entry and invoke mbhc hs detect
functions for respective codecs. Correct the logic
for headset detection pull up current and
volatile registers for digital part of rouleur codec.
Change-Id: I22545dc796c215c1501e883796546c97d8ca8698
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
