In WLAN ON/OFF stress test, due to system memory fragment, it's hard
to dynamiclly allocate contiguous memory for DFS huge memory which
is greater than 64K. Normally memory allocations of order of 4 and
upwards are not recommended by memory team. So use static memory
allocation for DFS.
ROME and Hastings already changed, this change is for Geona.
Change-Id: I33aa3efd378518491f06b496344ed3034c4978d9
CRs-Fixed: 2851914
Enable CONFIG_MOBILE_ROUTER SA415M Platform for Rome Genoa
and Hasting, same as SA515 Platform
Change-Id: I7f0899c562ea8447296f3ddd1b237ea0d6a1b962
CRs-Fixed: 2924075
Enable flag FW_LOG_PARSING for Genoa so cmd like dl_loglevel
can be sent to firmware.
Change-Id: I6fcecb6198907e56c94e5d8211ac0ea0ecadb7fc
CRs-Fixed: 2983102
HST/Genoa/Rome support TX_AGGREGATION_SIZE, need enable it.
TX_AGGREGATION_SIZE is introduced in
change: I9e49ad5218f913f116cf4472f768f572740f14df .
Change-Id: I63fc729f3daf2b1757c5eb2fb839ed22ebce359a
CRs-Fixed: 2926281
Remove all of the conditional compilation for pmf since this
feature is mandatory for future scope from protocol point
of view.
Change-Id: Id3a2127e9ecb343ad2a0354dcbc331c22167d7fb
CRs-Fixed: 2852630
1) Enable skb accounting for rm/gno/hst on auto platforms.
2) Remove an unused ini item name.
Change-Id: I19f8b70a409bb6485eea08fdbdf3a8e34839bf59
CRs-Fixed: 2872544
Use the macro CONFIG_ARCH_SA515 instead of CONFIG_ARCH_SDXPRAIRIE
for SA515 projects.
Change-Id: If4d7d62a64c509fa69c2c59890ffaaf7b763e01c
CRs-Fixed: 2832357
GENOA FW doesn't support WMI_REQUEST_LINK_STATS_CMDID. So, add this
change to disable link layer statistics for GENOA chip. This change
also fixed compilation issue without WLAN_FEATURE_LINK_LAYER_STATS.
Change-Id: Ib800c9717908767e390ccc234c577a5300f82cf2
CRs-Fixed: 2805832
Removed all the API realted to FEATURE_WLAN_RMC
as well as related SME/WMA code.
Change-Id: Id471ccabcfd183fbcc7ff4e4953991f9e1551526
CRs-Fixed: 2686364
Disable/enable some feature based on CONFIG_MOBILE_ROUTER,
which should be as same as hasting & rome
Change-Id: Ib0ba2d51e6dc869477226ae452e4439c255d1ee5
CRs-Fixed: 2646429
Currently CONFIG_WLAN_WEXT_SUPPORT_ENABLE is unconditionally enabled
in many defconfigs, including the default defconfig, but this leads to
build failures when WEXT is not configured in the Kernel. So update
the defconfigs to enable CONFIG_WLAN_WEXT_SUPPORT_ENABLE only when
CONFIG_WIRELESS_EXT is enabled in the Kernel.
Change-Id: Iecfd4e899c2b09c489547dd1a8ff70f71983853f
CRs-Fixed: 2620792
QCN7605 has 2 set of shadow registers, WCSS block and PCIe block.
As PCIe shadow register are at power domain boundary, enabling
PCIe shadow register for QCN7605.
Also PCIe shadow register falls below 512KB, no need to use register
windowing which is required to get it access from IPA FW.
Change-Id: Ic0bbc2de4c3e32c4fb6453d273f0f29d19f3537c
CRs-Fixed: 2623851
CONFIG_CRYPTO_COMPONENT is supposed to be enabled for all devices,
so enable it for Genoa as well.
Change-Id: Icf37a9052c329e362460342fe44d8fe70c5bb1ed
CRs-fixed: 2597797
The PKTLOG function broken with Genoa caused by
2857937, so add the needed macro back to avoid
crash issue while PKTLOG enable.
Change-Id: I3f9621830dcad415868fdee5fbeef8fdb86604b0
6 GHZ has introduced new set of frequency based APIs. Also there is
conditional usage of 6 GHZ band. Add configuration items for these.
Change-Id: I22703989ec7e6711af640f1f9d0afded46026b8a
CRs-Fixed: 2513098
The member of type_specific_data is not valid for ROME module. Add macro
protection for type_specific_data in the ath_pktlog_hdr to avoid offset
error when getting the msdu id info during processing pktlog TX info.
Change-Id: Icb8b95cef9a32732116522e4fc3b39067ff36037
CRs-Fixed: 2522277
Featurize DHCP indication for SAP and disable it
for QCN7605 as this feature is broken for HL
Data Path.
Change-Id: If1db649131d887a2aab18461187403b4b9a2c5b4
CRs-Fixed: 2496032
Currently there is no ini support to configure frequencies
which needs to be avoided for the acs channel list which
may allow SAP to come up on a channel which is not preferred.
For Example there are many legacy clients which supports
2.4GHz but don't support channel 12 and 13 (or does not have
the capability to detect country change where channel 12 and
13 is valid).
In that case, if SAP comes up on channel 12/13, those legacy
clients won't be able to connect to AP.
Hence, Add a feature flag and ini to configure the frequency
list which can be avoided during acs.
Change-Id: Id106b38228f837ba056eb916004dc012e919ddd2
CRs-Fixed: 2472004
qcacld-2.0 to qcacld-3.0 propagation
This change adds support for driver supported TCP
delayed ack to increase TCP RX performance in
third-party platform which does't support kernel
TCP delayed ack feature.
TCP delayed ack is dependent on count and timer
values. Whatever is achieved first will trigger
sending TCP ack.
This feature can be controlled through ini values.
gDriverDelAckTimerValue - timer value in ms
gDriverDelAckPktCount - delayed ack count
gDriverDelAckEnable - enable/disable feature
Change-Id: I8105bbb90965295b5a4aefeb00d344a90155974d
CRs-fixed: 2414224
Use WLAN_FEATURE_DP_BUS_BANDWIDTH to instead of MSM_PLATFORM for better
reading.
Change-Id: Iaed4f77b09b80ca8872a69c832491598db021232
CRs-Fixed: 2423299
Enable CONFIG_HOST_OPCLASS to include supported
operating class feature in host driver for genoa.
Change-Id: I44d6a3aa7c1c3372186532f7ff1f4353aba41350
CRs-Fixed: 2429681
Do not use MCL in the macro. Use feature name to define macro.
This is for CONFIG_MCL_REGDB cleanup.
Change-Id: I12af832d81815277ec6014ff5047bf960f01534a
CRs-Fixed: 2411995
The CONVERGED_TDLS_ENABLE feature flag was originally introduced when
the TDLS feature was being componentized so that one could select
either the legacy implementation or the componentized implementation.
That componentization activity has concluded and the legacy
implementation no longer exists. To align with the current usage
switch to exclusively using the FEATURE_WLAN_TDLS feature flag since
that more accurately describes the code being protected.
Change-Id: I2cdb4c6ddba22c5b1d29e87403e5e1c87ce5cbfe
CRs-Fixed: 2395728
To reduce hard coding in the driver, add the following build config
options with defaults to the Kbuild:
* CONFIG_WLAN_MAX_PSOCS
* CONFIG_WLAN_MAX_PDEVS
* CONFIG_WLAN_MAX_VDEVS (supercedes CONFIG_SIR_MAX_SUPPORTED_BSS)
* CONFIG_WLAN_PSOC_MAX_VDEVS
* CONFIG_WLAN_PDEV_MAX_VDEVS
Change-Id: I14fce4bf34eb511214ad0b31be72336a2620b960
CRs-Fixed: 2393150
Flag WLAN_FEATURE_NAN_DATAPATH was added to protect NAN Datapath
related code, while WLAN_FEATURE_NAN_CONVERGENCE was added to
protect the converged code inside NAN Component. Since the
original NAN Discovery related code has now been moved inside
NAN component and NAN Datapath cannot exist without NAN Discovery,
keeping these flags separate doesn't make sense. Combine these
two flags with WLAN_FEATURE_NAN flag which is the original NAN
feature flag.
As a cleanup of NAN code, combine all NAN related flags with
WLAN_FEATURE_NAN flag.
Change-Id: If98ecaace17f8724e9c28325ef61e721f42e1d8f
CRs-Fixed: 2377375
Enable FEATURE_WLAN_FT_IEEE8021X and FEATURE_WLAN_FT_PSK for Genoa as
targeted kernel version is 4.4.
Change-Id: I599be887b0021e7f53622c840dc76d5e3b47376a
CRs-Fixed: 2359886
Featurize MCL only WMI APIs by compiling them as a separate source.
It enables profiles/configs to selectively compile the WMI APIs
based on whether the feature is required or not.
Featurize WMI APIs and TLVs that are specific to MCL -
- DSRC
- NAN
- P2P
- PMO
- roaming
- concurrency
- STA
- Generic MCL specific WMI (STA)
Change-Id: I3b005b8f60491c7d27cf221b7505116e1b9c1a38
CRs-Fixed: 2333916
wbuff is a module which maintains a pre-allocated pool of
skbs for each registered module and allocates skbs when
requested.
Change-Id: Ia4d13479d8a1342227a2ecbaf29cc7a89bc5e30b
CRs-Fixed: 2313446
P2P Listen offload is not a requirement for Genoa, hence featurize
P2P listen offload code to save memory foot-print for Genoa.
Change-Id: If50c784bb4cd6daac513a0654364e78cd636c9d3
CRs-Fixed: 2304554
