Currently, we do not have support for 'he_ltf' command. But we need
this command for certain IOP testcases. Add support for 'he_ltf'
command.
Change-Id: I296b18762aaa52da80a5755c5bcca8dbd12d9b13
CRs-fixed: 2118948
qcacld-2.0 to qca-wifi-host-cmn propagation
If no SSID are passed to NL80211_CMD_START_SCHED_SCAN cmd,
interface spec requires that an active scan is not needed.
Therefore a passive scan is now requested by cfg80211_sched_scan_request
for this case.
Change-Id: I1b1b9232ffb9d8d5c0bc9a1d75145d39c9fe9e6b
CRs-Fixed: 902092
Initialize pdev_id for PDEV stats request and response event.
Add param to set pdev stats request timer.
Change-Id: I11f648070cd39f026129d1cf3aa13bf296d25e6e
During host invoked roaming, set
WMI_ROAM_INVOKE_FLAG_NO_NULL_FRAME_TO_AP
flag so that FW will not send NULL data frame while doing transition.
CRs-Fixed: 2046964
Change-Id: I043c3d2431e4da5af36fb710bd36a520550abbd3
Populate tx frame count and mac clock frequency to the
wmi channel info event object.
CRs-Fixed: 2114541
Change-Id: I6180e377d576409705e57d7aa9172141965f79ad
Currently LCA Disallow (Last Connected AP) bitmap is hardcoded
to be enabled only for PER roam scan.
Add Background Roam Scan also to the LCA Disallow bitmap set from
host to fw.
Change-Id: I4878350ef772f168ba909fd8b30cf2aa31f68fcc
CRs-Fixed: 2109974
Extended service bitmap is used by FW to indicate supported services
bitmap for services excedding the current limitation of 128. Add support
to save and use this bitmap to check services supported in FW. Also,
change exisiting services bitmap to be dynamic allocated buffer to
optimize the buffer used to save the bitmap.
Change-Id: I24a0321bc1a06ee3aedf1c6acbc379e907bbd464
CRs-Fixed: 2103617
Add new Bad RSSI threshold offset for 2G to 5G roam and flags
to roam_offload_scan_rssi_params and fill them in the WMI cmd TLV
to pass it to the firmware.
Change-Id: I78876f5104e67280b1342ec0957d0162edbaf502
CRs-Fixed: 2105894
Fill the roaming parameters wmi_roam_bg_scan_roaming_param and
send them to firmware to be consumed for the background roaming
at bad RSSI
Change-Id: I08786141d28f8459aad27aaf53816ec4cdec7f08
CRs-Fixed: 2082906
Add support to fetch min and max tx power from target for
a given set of mcs, nss, chainmask, bw, and other rate flags.
Change-Id: Iafe082db81503a52bdc704d4b71d86d23788fddb
CRs-Fixed: 2061802
qcacld-2.0 to qcacmn propagation
Add changes to support PNO scan in connected state to find better Ap's
based on rssi threshold, band and rssi preference.
Change-Id: I0744297cc5269f0fe37613247c911102e293d8e9
CRs-Fixed: 2000342
For DBDC/DBS cases, each radio will have a separate MAC
address. FW will provide the list to host in ready
event. Handler has been added to extract the list.
Change-Id: I6da96ae02a1f30995e3953358677090b84fc57c4
Few pdev params are populated as unavailable param in the TLV layer.
Some of them are now enabled by the target. Populate the right pdev
param enum as per the definition in the converged WMI header.
Change-Id: Ia06498da9023f53035abde31c3aef2749f6b65b9
CRs-Fixed: 1115239
Add timestamp parameter in scan event received from FW to aid
in calculating dwell time and overall channel switch time in
off-channel operations.
Enable foreign channel exit event inorder to be notified
by FW through the scan event.
Change-Id: I4ba028756ee7db35f6528c0554b09c73087184a7
CRs-Fixed: 2056330
Add required WMI commands to communicate support of
EXT NSS Signaling between host and FW. Also, if
EXT NSS Signaling is supported the use new WMI to
communicate the required information between host and FW.
Change-Id: If3e1ef11a55f8fbdffddb3b10963878a6a2ca415
CRs-Fixed: 2089043
Currently only action category is specified to be dropped/allowed
by fw. Add support for action id bitmask per category.
Change-Id: I208af7827532740104afbb3d0e9b8dda3a8b2d47
CRs-Fixed: 2072125
In WMI/WMA, data from event buffer from FW is used without
sanity checks for upper limit in multiple places. This might
lead to a potential integer overflow further leading to buffer
corruption
Add upper bound checks for max limit of event buffer (1536)
in all affected places to prevent the potential integer
overflow
Change-Id: Ic9194a27c4a4c63fc68ff7fc61165a53e66ca4f4
CRs-Fixed: 2095545
qcacld-2.0 to qcacmn propagation
Add support to include only selective IEs in probe requests in
order to improve user's privacy.
Change-Id: I59cf4181f60f5b4cd87a32fbcf29160d87ca59c8
CRs-Fixed: 1105495
FW implementation is updated to add more fields in chan info event.
Update host implementation to extract these fields.
Change-Id: I4935f3aa1c2e87d27a13a29651db8d8835cb4f91
CRs-Fixed: 2090787
Enable WMI PDEV parameters to configure per TID AMPDU and AMSDU in TLV implementation
Change-Id: I12982e78f880bf9bf8858aaa99aa416d7f775c17
CRs-Fixed:2089935
Add a field ldpc_rx_enabled to vdev start parameters so that
this information can be propagated from the upper layers to
WMI and further to firmware.
Change-Id: I25fd148f77d86eb646a0e40fef6ac99c4fbcdf22
CRs-Fixed: 2023893
qcacld-2.0 to qcacmn propagation
Randomize probe request's source address and sequence number to
improve user's privacy.
Change-Id: I265f15476f1a23a268f159a44b6a3e4243fb9068
CRs-Fixed: 1105081
Use sme session id in send_set_ric_req_cmd_tlv() as vdev_id, otherwise
it causes target assert when WMI_ROAM_SET_RIC_REQUEST_CMDID is sent to
firmware.
CRs-Fixed: 2037815
Change-Id: Ic3cb08fc62b3ca006abb78ce3b5d5fa028935783
Add support for rssi based assoc rejection from a bssid and
Try to connect to this bssid only after time interval indicated in
Assoc reject or when rssi has improved by margin indicated in Assoc
reject.
On connection send OCE rssi reject BSSID list to firmware so that
firmware will avoid connecting to these BSSID until RSSI improve or
delta interval has elapsed.
Change-Id: Ic14f85894a4a2f47bcdde9ce977c7b92aeaf8fce
CRs-Fixed: 2076654
Fix the number of buffers being passed in ROAM_INVOKE command
to the firmware. Fill it only if there is a valid beacon or
probe response being sent to the firmware
Change-Id: I0f569b847091bb9eb92a92de949c90ace0ab51fe
CRs-Fixed: 2077075
Fix implicit conversion from enumeration type 'A_STATUS' to different
enumeration type 'QDF_STATUS'
Fix implicit conversion from enumeration type 'QDF_STATUS' to different
enumeration type 'A_STATUS'
Fix implicit conversion from enumeration type 'WMI_START_EVENT_PARAM' to
different enumeration type 'WMI_HOST_START_EVENT_PARAM'
Change-Id: I1d8c7781baaaf6461273298e8eb82ff841d3c8fc
CRs-Fixed: 2063149
HT cap bit map is different for tlv and non-tlv based firmware.
Convert target cap to host cap bitmap to abstract out the differences.
Change-Id: Ia803efa3a895c7faa159d8051277d2a926b365a5
Populate tx params tlv that includes information related to power,
chainmask, bandwidth mask, preamble type, frame type etc to the mgmt
and offchan tx WMI fixed param
Currently, we send the command with TX params valid set to zero always
and hence target does not look for the TX param TLV. This change
implements API to populate TX params TLV that facilitates configuration
of parameters per TX frame be it data or management frame
If the TX params valid is set to false, target decides the values
to use for each of the mentioned TX parameters
Change-Id: I90a1b5e1c9bf0a54a907876ed3629c2d627b3c98
CRs-Fixed: 2070454
The length of buffer used to send wmi roam scan filter cmd is not
properly calculated and thus the length is less than the actual data
to be copied.
Fix it by properly calculating the length of the buffer.
Change-Id: I6a3baa5ca5560d2d04f9bd41a709a37abc1b95a9
CRs-Fixed: 2072057
TX management retries is configured by host through pdev param sent
to the target. Populate pdev param enum to support configuration
of management retries during TX
Change-Id: I3f8b976ef089a0455481923ce18147f167733b14
CRs-Fixed: 2073391
