Use pointer and allocate dynamic memory for msm_mode_info
in _sde_crtc_check_rois instead of object to reduce the
stack memory size.
Change-Id: Ida8fc7e2b94e19b3c791dcda55a465a4107ef976
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Signed-off-by: Jeykumar Sankaran <quic_jeykumar@quicinc.com>
This change disables hw-fencing for the last commit before
vm transition. This avoids configuration issues if hw-fencing is
disabled in the incoming VM.
Change-Id: I573b7d1665f8cef442168bd0ab83a4b2b6cebbb6
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
Add check in layer mixer to avoid odd values as HW does not
support it.
Change-Id: Ifddd2047c81a016b774712ee52cfceca83374e6d
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
This change adds a wait for input spec fence to bind
before registering for hw fencing wait on it.
Change-Id: I5453547c29672e39a95b91197983075e3b61d1eb
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
When destination scaler feature is enabled along with demura,
the crtc w/h will be lesser than the deumra layer w/h as it is
based on the panel w/h. Remove the invalid validation of
demura layers against crtc w/h to allow this usecase.
Change-Id: I5afd0407382a1bce458c97fcf8d571f5e7c0774f
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Add crtc checks to ensure the crtc width is always even number,
so there is no loss while dividing by num_mixers. Add checks in
dnsc_blur to ensure the src is always greater than the dest.
Change-Id: I876f19aa20857dc9ed2649c9cb7569348e7d5fd3
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Log the vblank timestamp during vblank callback. This will be
useful in calculating the precise difference between the vsync
while debugging. As part of the change, remove the vblank
counter logging in sde_crtc as it floods the logs with 4 entries
for each vblank request.
Change-Id: I6b532ad657581fb2a34318541acbd81a44858819
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
This change adds support for triggering output
hw fence upon programmable line count.
Change-Id: Ie4b8252e4f9a448a8c11d17696b9bb0ded81b04b
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
This change disables hw_fences when a mode switch
from video to command mode or command to video mode
is ongoing.
Change-Id: I6f99226b59b381c6d2ff34a85753f8608080f546
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
Starting mdss 9.0, dpu supports triggering
the frame fetch through hw-fencing. This change
adds support for this hw-fence feature.
Change-Id: Icc7d0b69fc2a51103d14612f5ac89b44a47ed826
Signed-off-by: Ingrid Gallardo <quic_ingridg@quicinc.com>
Signed-off-by: Christina Oliveira <quic_coliveir@quicinc.com>
This change collects the OPR, MISR values. If the values are
different than the previous then notify to client with custom event.
Change-Id: I2546439be1f665d90e6505d65283d28096bf7cdd
Signed-off-by: Akshay Ashtunkar <quic_akshayaa@quicinc.com>
Toggle LLCC SCID for each consecutive LLCC write
operations and force read allocate when NSE bit
set.
Change-Id: Ice473cb126b627056b7346f142bc84c120e05f0b
Signed-off-by: Amine Najahi <quic_anajahi@quicinc.com>
Avoid various possible nullptr dereferences.
Addresses various issues highlighted by static analysis.
Change-Id: I36d34d610b37bf2799a7e34cd1de8b909b5c0ae4
Signed-off-by: Nisarg Bhavsar <quic_bhavsar@quicinc.com>
Check the precise vsync feature bit in sde hw catalog features
bitmap for checking the precise vsync feature and remove the
obsolete has_precise_vsync_ts variable.
Change-Id: I1f0cfabe5dcf387358548e8ff5ea0d65d4d7cecf
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Currently a boolean variable is used to track if the system
cache feature is enable for a particular SCID.
This change converts it to use a feature bit instead.
Change-Id: I8461fd9fb837b871c4ac5c67a9ab7613aadea7bb
Signed-off-by: Amine Najahi <quic_anajahi@quicinc.com>
Currently, when doze mode is enabled the encoder off work
worker is started 1 ms after idle power collapse because of
aggressive idle-pc feature. This causes the system cache
worker to start after the clocks and vsync interrupt are disabled.
This change independently enables clocks and interrupts during
system cache work thread to decouple it from the encoder
off work sequence.
Change-Id: I8ed172b0e7c5c8e4e270e768434301d972e90eb9
Signed-off-by: Amine Najahi <quic_anajahi@quicinc.com>
Add line insertion support for sspp, this is used to support
display with external splitter. Line insertion logic checks
the difference between screen logical height and physical
height. If any difference is observed adds dummy and active
lines on screen.
Change-Id: Ieec322273df000a53fb39e05174c2d67c3c2da81
Signed-off-by: Rajesh kv <quic_kvrajesh@quicinc.com>
Avoid various possible nullptr dereferences
and check validity of index before accessing
arrays. Addresses issues highlighted by
static analysis.
Change-Id: I5abfbc8c4cacb56e9decc3a6339ab0fa3a63b606
Signed-off-by: Nisarg Bhavsar <quic_bhavsar@quicinc.com>
LLCC usage is currently limited to static display
configuration. With these changes, LLCC will be
enabled for always-on screen with Video mode.
Change-Id: I54cbb6f0aa6380819ca00e02ac8ffd1c01d07ede
Signed-off-by: Govinda Rao K S <quic_gkarikur@quicinc.com>
This change avoids null pointer dereference in different APIs.
Change-Id: I01eba9d64fa4ba2fd81f7f39f586867e22d66771
Signed-off-by: Narendra Muppalla <quic_nmuppall@quicinc.com>
* quic/display-kernel.lnx.5.10:
disp: msm: sde: avoid error during fal10_veto override enablement
disp: msm: update copyright description
disp: msm: sde: configure dest_scaler op_mode for two independent displays
disp: msm: dp: updated copyright set for 4nm target
Revert "disp: msm: sde: consider max of actual and default prefill lines"
disp: msm: sde: Reset backlight scale when HWC is stopped
disp: msm: dp: avoid duplicate read of link status
disp: msm: dsi: update vreg_ctrl settings for cape
disp: msm: fail commit if drm_gem_obj was found attached to a sec CB
disp: msm: dp: updated register values for 4nm target
disp: msm: sde: update framedata event handling
disp: msm: dsi: Add new phy comaptible string for cape
disp: msm: sde: software override for fal10 in cwb enable
disp: msm: update cleanup during bind failure in msm_drm_component_init
disp: msm: sde: dump user input_fence info on spec fence timeout
disp: msm: sde: add null pointer check for encoder current master
disp: msm: dsi: enable DMA start window scheduling for broadcast commands
disp: msm: sde: avoid alignment checks for linear formats
disp: msm: reset thread priority work on every new run
disp: msm: sde: send power on event for cont. splash
disp: msm: sde: always set CTL_x_UIDLE_ACTIVE register to "1"
disp: msm: use vzalloc for large allocations
disp: msm: sde: Add support to limit DSC size to 10k
disp: msm: sde: add tx wait during DMS for sim panel
disp: msm: dsi: add check for any queued DSI CMDs before clock force update
disp: msm: sde: correct pp block allocation during dcwb dither programming
disp: msm: sde: avoid setting of max vblank count
disp: msm: sde: add cached lut flag in sde plane
disp: msm: sde: avoid use after free in msm_lastclose
disp: msm: sde: update TEAR_SYNC_WRCOUNT register before vsync counter
disp: msm: dsi: Support uncompressed rgb101010 format
disp: msm: sde: update idle_pc_enabled flag for all encoders
disp: msm: sde: flush esd work before disabling the encoder
disp: msm: sde: allow qsync update along with modeset
disp: msm: dp: avoid dp sw reset on disconnect path
disp: msm: sde: consider max of actual and default prefill lines
disp: msm: ensure vbif debugbus not in use is disabled
disp: msm: sde: update cached encoder mask if required
disp: msm: sde: while timing engine enabling poll for active region
disp: msm: enable cache flag for dumb buffer
disp: msm: sde: disable ot limit for cwb
disp: msm: sde: avoid race condition at vm release
disp: msm: dsi: set qsync min fps list length to zero
disp: msm: sde: reset mixers in crtc when ctl datapath switches
disp: msm: sde: update vm state atomic check for non-primary usecases
disp: msm: sde: reset CTL_UIDLE_ACTIVE register only if uidle is disabled
Change-Id: If480e7f33743eb4788549f853ba05e744ecb38d3
Signed-off-by: Narendra Muppalla <quic_nmuppall@quicinc.com>
This change enables demura tap point capability in cwb.
Change-Id: Ie2e98ca721659c8151feeb36ff44244184ed5672
Signed-off-by: Yuchao Ma <quic_yuchaom@quicinc.com>
This change updates framedata event and ubwc stats API to
align with userspace handling and expectations.
This change adds the empty irq event handler required to register
the frame data event.
This change also adds handling to the crtc event notify to provide
the payload pointer directly, required for the buffer object,
ensuring pointers are not mismatched while sending drm events.
This change also updates the ubwc roi plane property to process the
uapi defined roi.
Change-Id: I209f2b7418a0ec33aa0488119eb3fdb8ae94e8ba
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
This change adds Detail Enhancer LPF blend support from MDSS 9.0.
Support is added for qseed block in both SSPP and Destination Scaler.
Change-Id: Ic8e3732059498a156f51fb93c5fd6638bd731c57
Signed-off-by: Narendra Muppalla <quic_nmuppall@quicinc.com>
Use #if IS_ENABLED() instead of #ifdef for configurations as vendor module
guidelines.
Use #if IS_ENABLED(CONFIG_XXX) instead of #ifdef CONFIG_XXX to ensure that
the code inside the #if block continues to compile if the config changes
to a tristate config in the future.
The differences are as follows:
1.#if IS_ENABLED(CONFIG_XXX) evaluates to true when CONFIG_XXX is set to
module (=m) or built-in (=y).
2.#ifdef CONFIG_XXX evaluates to true when CONFIG_XXX is set to
built-in(=y) , but doesn't when CONFIG_XXX is set to module(=m).
Use this only when you're certain you want to do the same thing
when the config is set to module or is disabled.
Change-Id: Ia806b9b01ad8414d0e4de027a382cb68e7fb4a6a
Signed-off-by: GG Hou <quic_renjhou@quicinc.com>
During the first commit, crtc state will be duplicated from the
crtc state populated with splash data. In this case, crtc will
already be set to active, but active_changed will remain cleared.
This will skip the power on event being set during complete commit
phase. This change checks for the cont. splash enabled before
sending the power on event.
Change-Id: I9964317d96468213e9abe9b029e64aa2981fb359
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
pm_runtime_get_sync increases the usage_count refcount immaterial of
success/failure of the call, leading to invalid refcount on failures.
Use pm_runtime_resume_and_get instead, which takes care of reducing the
refcount on failure cases before returning from the function.
Change-Id: Ib96050d5d7ecbd717e58b8a0dde2d03312444e15
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
Add support to parse and configure QoS values for offline writeback.
Expose a writeback connector property to allow user-mode to set
the usage type of the writeback block - WFD, CWB, offline-WB.
Change-Id: I864f79c4896ec757ac2d8b0f57a6a5775d164f21
Signed-off-by: Veera Sundaram Sankaran <quic_veeras@quicinc.com>
As per HW recommendation, FAL10_VETO_OVERRIDE register can
be programmed to disable FAL10 in alternate to disabling
uidle at the sspp level as disabling UIDLE controller will
only disable DPU traffic shaping and will not stop the
system from entering FAL10 state. This change programs
FAL10_VETO_OVERRIDE register during uidle disable and also
sets CTL_x_UIDLE_ACTIVE register to always one to avoid
race condition between different CTL paths.
Change-Id: I9c55f5da2037cb8c448cc978eac0a04608a93650
Signed-off-by: Yashwanth <quic_yvulapu@quicinc.com>
Large allocations using kzalloc can lead to timeouts. This updates
the allocation calls accordingly to use vzalloc to remove
requirements on contiguous memory.
Change-Id: I86fa0ae13277d97477210a082703514df792d8a9
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
This change avoids setting of max vblank count in crtc
enable if accurate vsync timestamp feature is disabled.
Change-Id: I6d8299359f581a162a7412da8c9b673e3aeae041
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
When a new connector is added or removed an a crtc because
of clone mode enable and disable update cached encoder mask.
Currently since cached encoder mask is not updated properly
vblank frame counter is returning wb encoder frame counter
right after clone mode disable on wb encoder.
Change-Id: Ieff9dfbf0c7df3688fb1b6f9d3f3614345b494c2
Signed-off-by: Prabhanjan Kandula <quic_pkandula@quicinc.com>
This change reinitializes the sde_crtc->mixers when CTL
datapath switch occurs during mode set and RM allocation
of CTL hw block is changed. This initialization is required
for CTL_LAYER programming to trigger on the new CTL allocated
from RM.
Issue case:
1. Primary Display is using CTL_0 and it is reserved.
2. Secondary Display is using CTL_1. On suspend, RM adds
CTL_1 into the free list.
3. External Display is powered on, RM allocates CTL_1 hw blk.
4. Secondary Display is powered on, RM allocated CTL_2 hw blk.
5. External Display is suspended/unplugged, RM adds CTL_1 into
the free list.
6. When any mode_set(say fps switch) occurs on secondary, RM
allocates new resources and CTL_1 is allocated.
sde_crtc->num_mixers is non zero, so all the layer programming
happens on CTL_2, but CTL_1_FLUSH bits are programmed causing
hw timeout issue.
Change-Id: I5f1f52b7673740c48b249ab4d36e80b7a1d3db96
Signed-off-by: Jayaprakash Madisetty <quic_jmadiset@quicinc.com>
This change sets CTL_UIDLE_ACTIVE register whenever uidle
is enabled and resets it only when uidle is disabled.
Change-Id: I0393d1585df4fdb79a844d04df62ac9eda949232
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
When downscale blur feature is enabled, calculate the mixex and crtc
width and height using the dnsc_blur's src width & height. Update the
sde_crtc_get_mixer width/height functions to return the correct size
based on the features enabled.
Change-Id: I52dd88cc52e1ca5cb37e381e92e0e3032e7b090f
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Commit ddac29b ("disp: msm: Pass the full state to crtc plane and connector
atomic functions") pass full state to crtc, plane, and connector atomic
functions and retrieve drm_crtc/plane/connector_state within the atomic
function.
This change puts macros in the callers of atomic functions to handle API
changes between kernel version 5.10 and version 5.15.
Change-Id: I8e710e33f0a149bbfaa54820a7174a05810e2da4
Signed-off-by: Bruce Hoo <bingchua@codeaurora.org>
Add a custom cache_enable property in writeback connector to allow
user-mode to control the cache setting on a frame basis. Configure
the hw and activate/deactivate the llcc based on the property. The
custom property is added based on the availability of the system
cache for writeback.
Change-Id: I812b31955eb36c75c33ac279b56502a13f7cdcbf
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add support to enable writeback block to use system cache for writing
the output buffer. This is useful in cases where output is routed to
primary source pipes with 2-pass composition. The implementation is
modelled based on existing pipe based cache configuration.
Change-Id: I2b9a96c5b42eb5727d11ca0f337aeeb4e69362c9
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
The interface resolution can be different from crtc/layer-mixer WxH
when certain features like destination scaler are enabled. Use the
sde_crtc_get_width/sde_crtc_get_mixer_width functions throughout
to get the correct crtc/lm size based on different features enabled.
This will help in validating/configuring lm & plane correctly.
Change-Id: I45de5844bf7465a3389cf723479c5449a835fb0a
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
