This change fixes the continuos splash logic that identifies the
pipes staged by bootloader. The same code flow is used in trusted ui
handover as well. Existing logic was counting the pipes twice if the pipe
is staged on both the layer mixers. This change simplifies the pipes
already staged before handover by using the pipe index to convey if
it is staged or not.
Change-Id: Idb255f2077161dc3553114ac5d04e0ef743bb5ea
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Use blend stage to get blend offset instead of z order.
Change-Id: I7924325d19dfbace0fadf4551f696fe222d17115
Signed-off-by: Anjaneya Prasad Musunuri <aprasad@codeaurora.org>
HFC feature of demura needs a skip blend plane to be set. If skip blend
plane is not set and HFC feature is requested to be enabled, driver
should skip turning on HFC demura feature. Change adds checks to ensure
that HFC is always enabled with skip blend plane staged.
Change-Id: I923359c7cb143867660b4c1e667f56ed42fa51c9
Demura HW block needs to be programmed with different sequence for
partial update use-cases. Change adds support for partial update
programming sequence.
Change-Id: I3ea38354b1120d7c545f6680562c47304cd1126b
In cont-splash use cases the bootloader's Demura configuration
must stay operational until user space takes over display control.
Introduce Demura shared memory region handling to ensure
Demura configuration data stays consistent and accessible to the
hardware.
Change-Id: I5ef20ad9286574904b3d33a4179629d5a16746cf
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Continuous splash setup checks the CTL configuration to determine and
log all planes that have been enabled for continuous splash boot.
This logic currently only checks the planes mapped to each LM on
a given control path, resulting in data planes being missed.
Update the boot plane enumeration logic to additionally check the CTL
fetch active registers to detect and log missed planes. This logic
checks against all planes found through the original enumeration path
to avoid logging the same plane twice. Note that planes found via the
fetch registers are assumed to be used across both rectangles due to
hardware logging limitations.
Change-Id: Ic1f4aaba94111fe096ba9764eeaef242beb6adf5
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
DPU has added support for noise injection into the layer stack. Change
adds support for noise layer programming and exposes the hardware block
to the user space modules.
Change-Id: Id176eea54fcdcd5d399457b14133a1ccde07299f
Add dummy layer mixer blocks to be used for dedicated
CWB.
Change-Id: Ie1fe4fa7502cf5cf4dba3f2c129257887a20b7ad
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Add new capture/tap point as CRTC property for
D-CWB feature. Update the hardware blocks and
corresponding APIs to configure D-CWB data path.
Add new hardware pingpong blocks that
are dedicated for CWB.
Change-Id: I22576df1768b50f9f47d8527f62913b01ff4d9a7
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Watchdog timer is moving from TOP to INTF. This change adds
support for movement and ensures backwards compatibility.
Vsync select only needs to specify whether or not to use
Timer 0 associated with the interface. It does not need to
select between Timer 0-4.
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Change-Id: I9d89a8cb1ea607e9fc0bdbffa0a6a9acceff7f13
Introduce support for the FP16 format and FP16 color processing
blocks. This includes support for FP16, FP16 UBWC, and inline
rotation on tiled FP16 pixel data.
Change-Id: I06a70cab5447140598682f687129d4f8662524b2
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Add necessary checks during the splash init to check
& execute the splash/ramdump buffer mapping/unmapping
only for the cont-splash use-case. This would help in
reusing the same path for LE VM setup during device assign,
which does not have any splash buffer.
Change-Id: I3ce168c530c7db4b14465efa3fd87889b5f99f5b
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Increase the maximum number of mixers per crtc to 4 to
support 4LM use case. This change also increases the number
of data path to 4 to support 4LM in continuous splash handoff.
Change-Id: I4655017dcb405fad69513bebb8fd7f848fc5873d
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add support for hardware based rounded corner part of
color processing framework.
Change-Id: I3e5f4dac6ffc759bb940215b7621ac716f255169
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add hardware register set and programming for VDC-m block.
Change-Id: I60ef27b507284521abdd10bb679a85303475ddc3
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add hardware catalog support for VDC-m block to parse
the register offsets and feature capabilities.
Change-Id: I1bfbc4b6e7e9f34738d49fecdef4b427a0ccded7
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Log hardware interface framecount during te and vblank irqs for
command and video mode panels, respectively. This will help in
debugging any missed frames.
Change-Id: Ie86f686c4cc12de6a1f31aa47d4c7a5b8a68ea55
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Fix resource and splash buffer handling in resource manager
and sde_kms to support continuous splash to be enabled/disabled
independently in multiple built-in display usecase.
Change-Id: I446ea9b08a794e2b053c37f55b31e51404bbcf71
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
SDE driver triggers the frame and waits for the
ctl_start interrupt for command mode display. This interrupt
provides confirmation that hardware has picked up the
frame. Retire fence signaling is associated with
this interrupt and it is sent at the rd_ptr interrupt
after ctl_start. Due to lut dma delay, ctl_start interrupt
may be trigger before rd_ptr or after rd_ptr. SW manages
this complexity and handle retire fence for different cases
with 500us threshold logic.
This change replaces the ctl_start interrupt with wr_ptr
interrupt by programming it to trigger at 1st write line
count. This is guaranteed to come every time and it is close
to rd_ptr interrupt. That allows retire fence trigger at
wr_ptr interrupt and simplifies the SW logic. CRTC commit
thread would be held slightly longer with this change
as the wr_ptr is always close to rd_ptr and after
ctl_start.
Change-Id: Ic47a8f82c854b4aded0d70c95af853b28a68ffd6
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This snapshot ports changes from 4.14 to 4.19 into
the msm and sde layer. Snapshot was taken as of
commit 0f8fb25421ff ("cnss2: Add device version to
SOC info structure").
Change-Id: I59b799a78319c2db6930a2a10bc38976f8c09898
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Log ping-pong current line count during ctl-start
and rd-ptr interrupt. This will help in debugging
ping-pong timeout issues.
Change-Id: I58185330fe9e8a64f48d6da60c974b23a9e68b44
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
