Expose the number of RC hardware blocks to handle multi-display
use cases where RC feature needs to be enabled only if there
are sufficent RC hardware blocks available.
Change-Id: I37fe3ee4ac72894d9d51e832551d3fc19c0354b8
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Delayed work items may touch HW registers. If these work items
run while HW is not owned by this VM it will lead to invalid
access. This happens in video mode as HAL does not disable idle
power-collapse in this mode. It can also happen with ESD status
if lastclose or TUI transition failure occurs.
Although there is a contract with user mode to turn off certain
features, kernel cannot rely on it to always do the right thing.
Prevent potential crashes from certain corner cases by
cancelling all delayed work items when the HW ownership is
transferred.
Change-Id: I08da17f2ce72bf2fddf71924c3e8edd2e2715be8
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add changes to modify the phys_enc->in_clone_mode variable
post wb_reset_state since this is a shared variable used
during atomic_check and atomic_commit. In current issue case,
wb_atomic_check has set in_clone_mode to true in commit N,
and in commit N-1 CWB is being disabled and re-sets the
in_clone_mode variable to false causing pp_done timeouts in
primary in commit N.
Change-Id: I8159bbdb5622a351d76bdc4dba75d48df20f4365
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
In PM resume with CWB concurrency usecase, crtc pointer in
conn->state is NULL since drm_mode_config_reset operation is
performed on pm_resume. This change relies on conn_mask in
new_crtc_state for primary connector retrieval and also adds
get_num_lm_from_mode callback to DSI for LM count retrieval
from dsi panel topology. Existing get_mode_info api cannot
retrieve the topology info because mode->priv_info is NULL.
This occurs as WB encoder is added in the drm encoder_list
before primary encoder, introduced as part of commit d28ebf05f4
("disp: msm: sde: populate WB display encoder list before dsi").
Change-Id: I55358fd88ab778bd81475cf3628be13335de1cb5
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
During idle power collapse, dim layer dirty flags are
stored in sde_crtc_state which might be invalid if state
swap occurs. This change adds revalidate mask in sde_crtc
structure to revalidate after coming out of idle power
collapse.
Change-Id: Ie2f34a794896a3f8e729ef7d1f3ae35340123257
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change avoids upstream drm issuing drm_atomic_commit in
drm_fb_release which is leading to artifacts on screen or
atomic_check failures due to atomically unstaging each fb
from plane_state and committing remaining planes on hardware.
a) This patch moves the state operations for setting crtc to
connector state to a helper api.
b) This patch clears any dim_layers present in the crtc_state
as part of null commit.
c) This patch removes any framebuffers attached to a drm_file
in msm_preclose whose refcount is not managed by composer kill
inadvertently and issues null flush to hardware in such cases.
d) This patch handles msm_preclose as part of msm_release
operation since legacy feature is not supported
for msm_driver.
Change-Id: Ib2068d74d4b23b73b7c84544858c9f6bb6adfa67
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change removes exposing Demura CWB tap point capability
to userspace.
Change-Id: I7be24a2004ce489fca76593cdb9f75e8b52d4461
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
max_dp_dsc_count needs to be updated to total dsc count
only if dsc_switch_support is present. Updated
allowed_dsc_reservation_switch just after connector_init
before max_dp_dsc_count value is modified.
Change-Id: I878cde62b4940c629293eba0a3794f4dc2996b4f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds allowed_dsc_reservation_switch to determine if
dsc seamless switch is supported for DP. Also, based on the
flag, it determines and populates the required number of
available resources for DP.
Change-Id: I9cd7219a50d352369c5bc8386ce7dc25c30b80b6
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change sets a flag to true if a mixer is a virtual mixer.
Virtual mixers will skip setting up mixer ops and debug register
dumps as their range is not valid. Since mixer ops are no longer
guaranteed to be set, add null checks before using these ops.
Change-Id: Idfe7e1e2b893dadbbe6756d69d0c4ca4fa6ae4ce
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Allow input fence status read only when crtc kickoff is in
progress to avoid race between status read and fence destroy.
Change-Id: I3402bfcb38940628f09f645a3cee31f821daeae9
Signed-off-by: Andhavarapu Karthik <kartkart@codeaurora.org>
In dual display usecases, during pm suspend/resume,
commit is scheduled only on primary crtc thread. If idle
timeout value is very short such as in LP2 mode, it might
result in race condition due to idle pc off work getting
scheduled on its crtc thread. This change adds kickoff in
progress flag to handle such cases as crtc frame pending
count is only updated after rc kickoff.
Change-Id: Iebb331d914b23cc5eeadfeb2a488891e88b3202a
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
During wait for commit done failure cases in the current
code in video mode and command mode(posted start), global
atomic state for current crtc state will be assigned NULL
during state swap which will lead to crash while using
drm_atomic_crtc_state_for_each_plane API. Also in such
timeout cases, border color staging and kickoff being
done without any vblank wait might lead to inconsistent
state because of configuration overriding from the next
commit. Since the timeout is observed at the end of commit
cycle, only soft reset should be done here and remaining
in the next commit cycle.
Change-Id: I0d42dc27035f4f79394aeec347d797c99ed76e5f
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
During one of the DP timeout usecases, flush doesn't take
effect due to vid vblank wait failure. As a result, smmu
faults are observed because of fetching the previously
staged planes. This change adds ctl reset in the same
DP atomic commit context to recover and avoid
smmu faults.
Change-Id: I2f9aceca56e27f140607317f7596d6fe0d908af8
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
This change adds pending ctl recovery mask in sde kms
structure to check if there are any ctl paths pending
for recovery and stages only border fill during such
conditions to avoid device crash. Below is the issue
sequence observed during the crash:
1) On one of the ctl path, flush didn't take effect and
flush bits are still pending.
2) It was a NULL flush and last good flush on that
interface has DMA2 pipe staged along with other pipes.
3) Different ctl path re-uses the DMA2 pipe (attached to
ctl path in #1) causing wr_ptr timeout followed by
ppdone timeout.
Change-Id: I07eb9f2fe41f59963dc27655c551c05abe240392
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
This change adds a fix to correct indexing logic while
parsing frame data buffers and resets the count correctly.
Change-Id: Ic5a20ecd7093423ea293432c9492eb920acdd6f4
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Use blend stage to get blend offset instead of z order.
Change-Id: I7924325d19dfbace0fadf4551f696fe222d17115
Signed-off-by: Anjaneya Prasad Musunuri <aprasad@codeaurora.org>
While in clone mode, allow connector ROI property to be set without
setting CRTC ROI property. Currently, both these properties must be
set or else an error is reported.
Change-Id: I516c27a3d31c8d31b967e4c8577f57f1b8b7e327
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change reprograms planes and crtc as part of the post enable
power event so that the first commit sequence after this event
does not have to reprogram these.
Change-Id: I2403337b95c70d2a3104aefcc647afa66f4c69a6
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add support to send a data packet of info, written to
predefined buffers, providing information about each submitted frame.
Add required UAPI definitions for frame data buffers and event
notification.
Add support to read ubwc statistics from hw, based on defined rois.
Change-Id: I51f279de98ae4e2a02b0df6943d334764011d5db
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change exposes whether or not inline rotation threshold
should be taken into consideration or skipped based on
skip_inline_rot_threshold property.
Change-Id: I4108f6ae86039815d28836bfa0e184737aaddd8a
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
This change moves the code of updating the qos lut for qseed3
to each plane after updating the scaler configuration. This
avoids using stale values for qos settings.
Change-Id: I2c55a98e1ba9790d596c55160933cd5afd2388e5
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Due to lock sequence inconsistency between sde_crtc->spin_lock and
sde_kms->hw_intr->irq_lock can cause deadlock, to avoid this possible
deadlock this change uses different spin lock for frame events.
Change-Id: I51b1184dfa1069c87653099b95b992b277721daf
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add VM ownership checks before accessing the HW through the debugfs
path in sde crtc/encoder/connector modules to avoid illegal access.
Change-Id: I4ff8f29353835d263beb2091bdeec40125addbf8
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Report the AVR_STATUS which indicates if there's a pending
trigger when Adaptive Variable Refresh feature is enabled.
This allows SW to detect whether the old frame is repeated
or if the new frame was taken when the trigger is very
close to Vsync.
Change-Id: I6b04482e5c4c3bb92bad426c529c1fd3612d41c3
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Fix dlkm compilation errors that are due to the use of -Werror
flags used by the build system.
Change-Id: I5e1e9bc63c1361d73e4930aab123212717872ecb
Signed-off-by: Tatenda Chipeperekwa <tatendac@codeaurora.org>
Calculate line_time once during modeset and allow
each plane to use it instead of calculating for each frame.
It also simplifies the line_time calculation for
command mode display.
Change-Id: I94ce29eec94bfdbee9016fbf93378661ebf79c03
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
HFC feature of demura needs a skip blend plane to be set. If skip blend
plane is not set and HFC feature is requested to be enabled, driver
should skip turning on HFC demura feature. Change adds checks to ensure
that HFC is always enabled with skip blend plane staged.
Change-Id: I923359c7cb143867660b4c1e667f56ed42fa51c9
Encoder is disabling planes and unstaging layers from layer mixer. Some
of the crtc features are dependent on the plane being staged. Change
adds api that encoder can call on crtc to stop the features that are
dependent on source pipes.
Change-Id: I4d875155ceb8f66acfe6ce0096141ca7253bb140
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
When states are duplicated ensure that payload addresses are not copied
for range overloaded properties. Allocate the memory and copy the
payload so that each state has its own heap pointer.
Change-Id: I0fb8941f69216a48f73aba9b59338ace9916e179
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Extrapolate the Demura plane configuration from the Demura DSPP block
on cont-splash boot, and pass this information to DRM clients via a
CRTC property. This will allow user-space to be aware of all plane
reservations, and avoid plane mangling in multi display use-cases.
Change-Id: I6d216f555fcddbd19c18b6209dc830c21f6be5a4
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Expose overall DSPP and DEMURA counts on CRTC object to allow
DRM clients to make better policy decisions.
Change-Id: I59d795cafc829e8b2fe6a3f2fe597c7d5925105d
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Declare the continuous splash pipeline setup to userspace by filling
in the DRM states for all plane, crtc, encoder, and connector objects
in use. This information will be treated as an 'informative' state,
and will be cleared at the start of the first commit to maintain
the DRM methodology of DRM clients being the only controller of
the pipeline. This ensures any configuration provided by userspace
is accepted and applied, even if it may already align with the setup
done by continuous splash.
This DRM state configuration is done via manual modification of the
DRM object states. Modification via the exposed DRM UAPI functions
is not possible due to no drm_atomic_state object linking the DRM
pipeline objects together.
Change-Id: I67650e05aafbb4e799cf60939f0595bc3786fc6e
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Recent investigation shows that color processing properties are
incorrectly being cached in validate. This can result in unwanted
color processing properties being applied if a previous commit
failed or was validate only.
Add color processing properties to sde crtc state instead of marking
them dirty in color processing driver. When atomic commit is called
properties from state will be marked as dirty and applied.
Change-Id: If231a1f028e4cbd0b50eb0a947f4d58f94390a0c
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Currently, power on and off are being triggered prematurely.
This changes moves both calls to the end of enable and disable
functions to better align with events. It also creates a common
function to simplify event notifications.
Change-Id: I0291747a84991deb139552b2bff476a6436d5409
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
