In PM resume with CWB concurrency usecase, crtc pointer in
conn->state is NULL since drm_mode_config_reset operation is
performed on pm_resume. This change relies on conn_mask in
new_crtc_state for primary connector retrieval and also adds
get_num_lm_from_mode callback to DSI for LM count retrieval
from dsi panel topology. Existing get_mode_info api cannot
retrieve the topology info because mode->priv_info is NULL.
This occurs as WB encoder is added in the drm encoder_list
before primary encoder, introduced as part of commit d28ebf05f4
("disp: msm: sde: populate WB display encoder list before dsi").
Change-Id: I55358fd88ab778bd81475cf3628be13335de1cb5
Signed-off-by: Jayaprakash Madisetty <jmadiset@codeaurora.org>
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
The connector detect function is currently implemented as a
callback from the framework, and creates a context before
calling the detect_port_ctx MST callback. This change updates
the callflow so that the framework calls the new detect_ctx
function in the MST case. This removes the need for creating a
new context before calling further downstream functions.
In addition, references to the mst_connector_get_info
function were replaced by connector_get_info to avoid
redundancy.
Change-Id: I224d09e77fad4b6925a42b1bc912a05e3e4d060a
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
Move esd check to write pointer wait instead of during
write pointer timeout. With this change display will avoid
improperly signaling a retire fence and allowing two flushes
to happen within a single vsync in cases where ESD failure
is happening.
Change-Id: I6fbd76a2f6b47d3237039f66a3b1edd1f72a0a1d
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Add a new connector property to allow DC dimming feature to set
dimming backlight LUT. This change also adds a connector event
for client to register for backlight info needed for digital dimming
feature, including OS brightness, OS brightness_max, panel_backlight,
panel_backlight_max, and scale factors from ABA and LTM features.
Change-Id: I78f713fb2b965ca24effd973b4dfa9ff07a852f8
Signed-off-by: Ping Li <pingli@codeaurora.org>
Mode information apart from the fields in
drm_mode_modeinfo that can trigger a modeset like
dsc-nondsc, video-cmd are defined in sub mode.
For each mode in connector->modes there can be
multiple submodes.
Change-Id: Ib8697d3fa4ea5261d9ac4943b1a4149e22c4da2f
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
This change adds logic to determine dsc switch based on
the connector property "CONNECTOR_PROP_DSC_MODE" and
performs seamless DSC switch if there is any change in
DSC configuration. The connector property is populated
in msm_sub_mode based on which suitable mode is selected.
Change-Id: Ifc4931f16dfb814781bc1d72b103e09103e6bfee
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
Some panels require a fixed step rate for a particular mode.
This change allows DSI panels to specify a single supported
step rate for each nominal fps rate which SDE will enforce
during atomic check of AVR parameters.
Change-Id: I049415449bc88ccd396fced16d4534251eac3a06
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add AVR step support so SW can trigger a late frame and instead
of immediately triggering, HW will perform the update at the
start of the next step interval. This allows for a fixed SW
vsync timeline to be maintained in userland, eliminating the
usual drift from the actual HW vsync caused by a late frame.
This change adds AVR_STEP support via a DRM property.
Change-Id: I4cf8a296989805f134c2165a3bed0b050bb09c96
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Add a new connector range property and a new entry to the panel
capability blob to publish the list of supported RFI frequencies.
In addition, add the required functions to set, validate and update
DSI bit clock rate value to trigger an internal seamless mode switch
and reconfigure DSI clock and PLL.
Change-Id: I7d19cc369f8c5528709f2f20a51ef02180ebdea4
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Declare the continuous splash pipeline setup to userspace by filling
in the DRM states for all plane, crtc, encoder, and connector objects
in use. This information will be treated as an 'informative' state,
and will be cleared at the start of the first commit to maintain
the DRM methodology of DRM clients being the only controller of
the pipeline. This ensures any configuration provided by userspace
is accepted and applied, even if it may already align with the setup
done by continuous splash.
This DRM state configuration is done via manual modification of the
DRM object states. Modification via the exposed DRM UAPI functions
is not possible due to no drm_atomic_state object linking the DRM
pipeline objects together.
Change-Id: I67650e05aafbb4e799cf60939f0595bc3786fc6e
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
Expose panel mode from kernel to SDM with SDE connector property
CONNECTOR_PROP_MODE_INFO and set panel mode from SDM to kernel
with SDE connector property CONNECTOR_PROP_SET_PANEL_MODE for
avoiding private change in upstream code in QGKI kernel.
Change-Id: I0629dad9399967cc1118ac02ce30597076ca367d
Signed-off-by: Lei Chen <chenlei@codeaurora.org>
Drm panel pointer is no longer available in the drm connector.
This change stores the drm panel in the sde connector.
Change-Id: Ia7ed35d1f0914c45e34f15b02c8a3d8c32292ee6
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Move away from the private and private_flags fields from drm_mode,
as it is being deprecated in latest kernel version. Instead, Add
msm_display_mode as a wrapper to be used in downstream to store these
parameters. Also, store msm_mode in connector_state to be accessed
in commit path.
Change-Id: Ia5bdebe75f00aa15fb7db4dc3a0d50c30894a95c
Signed-off-by: Orion Brody <obrody@codeaurora.org>
This change moves the backlight update operation from
drm bridge enable to connector post kickoff.
When timing engine is enabled with programmable fetch
enabled, the timing engine will start counting from
the prog_fetch_start point (which is somewhere in VFP).
It’s a grey area from that point to the actual panel
vsync and SW should not trigger DMA command during that
time.
During display resume, sometimes the INTF timing engine
do not get enabled completely at the first vblank irq.
The backlight update cmd transfer trigger as part of the
drm bridge enable can also take place at the same time,
that may cause DSI cmd transfer failure.
Change-Id: I2722d3c23012ef0e7bcc7f728ec5658318ce4e60
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Currently, in SST mode, sink edid is read once after hpd
and reused on subsequent mode enumeration calls. But in
MST mode, there is no caching and the driver re-reads the
edid from the sink on every get_modes call for each monitor.
Each read takes more than 500ms causing unnecessary delays
during MST enumeration.
This change reads the edid once per hpd and uses the
cached data on subsequent calls.
Change-Id: I27545a44b9f9bd40000dde60735815f9c47fa54c
Signed-off-by: Sudarsan Ramesh <sudarame@codeaurora.org>
In current implementation qsync min fps is single value.
It is same for all the list of supported dfps list.
Added support for new dt entry dsi-supported-qsync-min-fps-list
corresponding to the fps supported in the dfps list
dsi-supported-dfps-list.
Change-Id: Ifd5309c2f51865a3c0d9fadb65cbcd291b6ef42b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
The change adds a new mode property allowed_mode_switch. The new
property is a 32bit bitmask that indicates the modes each mode
can switch to. This change is required to pass the driver mode
switching capabilities, so that user mode can reject any mode switch
that is not supported by the driver.
Change-Id: I76d1733a07a6d57487ba9f461055270d7e60e060
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
When DRM property objects are created, the DRM framework attaches a
dellocator which can eventually free the object when the last reference
is removed from it. The framework can only do this before the driver is
registered. If a property is created after the registration then the
framework is unable to attach a deallocator causing a memory leak during
tear down.
The current DP driver creates a new colorspace property whenever a
new dp connector is initialized. It creates a base connector at probe
time prior to registration. But then it also creates new connectors,
post registration, whenever a new MST dongle is attached to the
topology, causing memory leaks.
This change limits the property creation to the base connector and
attaches the same object to MST connectors to avoid memory leak.
Change-Id: Ib97dc7aac260b4f3f96c1097f58bd276c68501f8
Signed-off-by: Rajkumar Subbiah <rsubbia@codeaurora.org>
The panel regulator votes are added by default during
dsi probe to make sure sync state driver doesn't disable
these regulators for cont_splash use case. These regulator
votes need to be removed when cont_splash feature is
disabled. Add a new connector API to handle this.
CRs-Fixed: 2734419
Change-Id: Ie54c8f246877a042afacddaeae8b90440652116f
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
This change removes the fb_kmap debugfs node along with kernel
mapping of writeback framebuffer. It also replaces dma_buf_kmap
calls with dma_buf_vmap.
Change-Id: I2fbee7fa5922071f6805d8e6df540ce87056bc0b
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change implements a new feature to read the cmds response
of the panel from sde connector interface. Sde connector opens
debugfs interface for all the connectors those have support for
cmd receive operation.
Sde connector init module creates rx_cmd debugfs file at
/<debugfs-root>/dri/0/DSI-1/ for DSI-1 connector.
Format for DSI command transfer:
echo "command bytes" > /<debugfs-root/dri/0/DSI-1/rx_cmd
byte-0: the length of received buffer
byte-1: data-type
byte-2: last command. always 0x01
byte-3: channel number
byte-4: flags. MIPI_DSI_MSG_*, must be set to 0xa
byte-5: 0x00
byte-6 and byte-7: command payload length
byte-8 to byte-[8+payload length]: command payload
Example:
echo "0x01 0x06 0x01 0x00 0x0a 0x00 0x00 0x01 0x0a" > rx_cmd
The command receive operations are allowed only if controller
(ex. DSI controller) is in active state.
Read the value of panel response:
cat /<debugfs-root>/dri/0/DSI-1/rx_cmd
returns the value of this command.
nothing - failure, xx xx - success.
Change-Id: I912b65d606e248c7a886d219f4363bf7766ee7b6
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Register for getting a blocking notified call when the display cooling
device mitigates. Update the current brightness to the thermally allowed
level.
Change-Id: I20945a20751646e6d9bbf8bb7e7039c6ce43c306
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Currently, compression info passed to resource manager is not
valid in atomic check phase. Also in current design allocation
of msm mode info object is from stack which is huge and causing
stack overflow in continuous splash use case. This change fixes
these issues by moving mode info object to heap allocation.
Change-Id: Ifaf39b3ae59c942da5c00b82c73cb97cdaf500d3
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
If DPU hardware supports demura feature, install the connector
properties related to demura feature.
Change-Id: Ieaddfc695e9f57e3c45e2bc0bd2c2e103f895ba8
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Add colorimetry data block parsing to SDE EDID parser so that
we can eliminate usage of the same information parsed in upstream
EDID parser.
Change-Id: I53692bb90eeee1f8a865da54ce0e8932c381489a
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This is needed to replace usage of upstream EDID parser
to satisfy GKI requirements.
Change-Id: I1e4043bd8e95b2ff71e7e4b05706cbeb9c66b03d
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Add VSVDB parsing support to sde edid parser. This is required
for HDR10+ support. Currently the parsing is done in the upstream
edid parser. This shall be removed in a subsequent change.
Change-Id: Ibd3a31e12bba68e14e278e0e478656453eb111ac
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
This change programs dither based on user mode input data and
reprograms the dither when device comes out of power collapse.
Change-Id: I83be20c8eb2dc2221cc57cd2395f6512338ff6ef
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change enables display drivers code compilation
for lahaina target and current location of header files
is replacing the header files in usr/include/drm directory
before installing display specific header files. This change
ensures both the drm and msm_drv header files are exported
to user mode clients.
Change-Id: If6fc347598b902e670b7206dbcb82fe0740b3984
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This snapshot change adds downstream support
for drm 5.x+(msm_lahaina branch) linux kernel.
Change-Id: Ia691c95da155a00e449c91a2f1a5b20a8e71aed4
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add changes to support avr mode config update during
prepare commit which happens before gpu fence wait
for the input buffers.
Change-Id: Ib2cb5b7e1f10501914c003f6cf066b85048f79d4
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Add support to enable one-shot mode during qsync
update. This feature ensures the frame drops can be
reduced due to delayed software flush for the
current commit. Also, add changes to disable the qsync
feature post commit.
Change-Id: Icb158853f52284bcf8fa641e5f62200c5460b660
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Add the colorspace property for DP controller for MSM. Also, change
the default method to send the colorimetry information to the sink
from MISC bits of MSA to VSC SDP packets if the sink supports it. This
helps to avoid dynamic switches between the packet types for sending
the colorimetry information during BT2020 and DCI-P3 use-cases.
Change-Id: I7ddf879a187b023fcf7404d64028e4d19b031119
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
The drm_panel defined in sde_connector was not used, so
removed it.
Change-Id: I70a94f11ebd60362d25e37a256f46d3d4942089d
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Create a data structure to maintain available hardware resources
and track capabilities. This data structure is used to send
the current available resources and caps information to
connector ops get_mode_info, get_modes and validate_mode to
process the display mode.
Change-Id: If38fc628ee5ab4729821f88c0050ab45375187b8
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Primary and secondary displays should have first priority
when reserving lms. Static reservation can potentially block
higher resolutions for the required displays. This patch gets
the layer mixer requirement for primary or secondary display
if available. It reserves those layer mixers dynamically
for the respective display when connector is registered.
Change-Id: Id69dac4c72d6b20008049f4aeb71c0f97d0a426b
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
