DUT should be able to roam to a better access point if current
AP is having congestion/packet error.
This roam also devise a new selection logic for candidate
selection which considers channel congestion and AP capabilities.
Change-Id: I6cffbf0de059a218e971be32fbdc1a0092ceea9d
CRs-Fixed: 1090934
Active Mode Berkeley Packet Filter (Active BPF) is a new feature that
allows firmware to apply BPF even while the Apps processor is active.
There are 3 modes:
* Disabled: do not apply BPF in active mode
* Enabled: apply BPF to all packets in active mode
* Adaptive: apply BPF up to some threshold to avoid performance impact
Add WMI APIs and related logic to support configuration of Active BPF
Mode.
Change-Id: I8c0778b3fa73d148422aa103b0fc0950433fec95
CRs-Fixed: 1111400
Object manager psoc service ready api provides host (ext)service ready
data structures hence remove duplicate copy from wmi_unified_param.h
and change WMI to use psoc service ready data structures.
Change-Id: Iaec20e9b818077ed1ca58754c4b1bc6deaedd761
CRs-Fixed: 2002016
Currently, Host maintain multiple data structure at different
layers for offload related features like arp/ns/gtk etc.
Instead of using many structure use single data structure across
all layers for offload related feature (arp/ns/gtk) which is now
exposed by PMO. Hence to include PMO header's in WMI, refactor the
WMI code for PMO component by carving out PMO specific functionality
separatley.
Change-Id: I8314d5ece49bf6972fbe706d635385ae22d11b2e
CRs-Fixed: 2004523
Add multiple vdev restart command request WMI command API and
extraction API for CSA count status event to support CSA implementation
for beacon offload.
Change-Id: Ic309f592137dc725e04590dc0093f30b481ebf9b
CRs-Fixed: 2000449
Firmware requires WMI commands to be sent on different copy engine for
each MAC. Add support in WMI to use different endpoints for each pdev.
Change-Id: Ie0dfe71043275ac694362f88b625219f089b5303
CRs-Fixed: 2005214
Support to add hw_mode in init command is added by FW
to let host choose the mode to be use. Change init cmd
send API to enable upper layer to send the hw_mode selected.
Since this is new TLV in init command, init cmd send API
needs to be changed to accommodate this parameter.
Change-Id: I172d8d737425599c36666d9fec8a6cdd48085097
CRs-Fixed: 2004652
pdev_id is required to identify the pdev object on which this event is
recieved. Add pdev_id in the event extract API.
Change-Id: Ia910d42af6a9d6099da1b7781601b0320dff80ba
CRs-Fixed: 2003898
Converge on common WMI event handling for (ext)service ready
such that common PSOC object can be populated after common parsing.
Legacy (ext)service ready handlers continue to co-exist to support
legacy modules. Legacy service ready handlers can be removed once
legacy modules are also componentized and start using new object
model of PSOC, PDEV, VDEV and PEER.
To support multiple SoCs register for various psoc objects via legacy
callback registration routine during psoc probe and populate common
psoc object once WMI (ext)service ready event is parsed.
CRs-Fixed: 1110768
Change-Id: I966b8f7c775a19ac6e51ad5217a2dd0287acfada
Change all the WMI API's event buf length param to
uint32_t to adjust to event buf length param type
in the wmi_unified_event_handler().These changes are
needed to converge on the common service ready handlers.
Change-Id: I553bab579f514c356b59b003c0ec66c17e60e26f
CRs-Fixed: 1110768
Change signature of tgt_mgmt_txrx_rx_frame_handler API
and mgmt_frame_rx_callback by replacing rx params of type
void pointer with that of struct mgmt_rx_event_params
pointer.
Change-Id: Idfa54f1c9bfec22a2cf2e98740765dcd797513df
CRs-Fixed: 1103247
This patch adds support of new WMI command WMI_COEX_VERSION_CFG_CMID
for 4-wire coex configuration in non_tlv_ops.
Change-Id: I63da2c7ae99c38d297f7f13a8086611263f7fc5b
Acked-by: Daniel Kim <kimdan@codeaurora.org>
CRs-Fixed: 1081065
Hold additional reference to BSS node during node allocation, and free
it in delete response. This ensures BSS Node Freed event is sent to MLME
only after receving peer delete response for BSS node.
Change-Id: I384eac54f437000a1c09eb53751ad8b8e26617ad
CRs-Fixed: 1112381
Add pdev_id in FIPS extract params to be used to get appropriate pdev.
Also refactor extart APIs to get all data in one API and implement TLV
APIs.
Change-Id: Ib58d54ad0dcc25814e58f45e7e4a83d01549a523
CRs-Fixed: 1115213
Add TLV APIs to extract DCS intereference event. Add pdev id in
extract API used to derive pdev object.
Change-Id: Ie42ec1e3aec899ddc5b6b13d37dfd468ee29df7c
CRs-Fixed: 1115213
Add extract API for handling UTF event data received from the target
for both TLV and non-TLV cases.
Change-Id: I62525d7c8663fe90e0e3e76cf5286bb9dc86acd0
CRs-Fixed: 1115293
Add hw_mode_id. HW mode is received in extended service ready.
This will be used to determine FW capability to support multiple radio.
This is used on host to create multiple instantces of pdev on host.
Change mac_phy_cap extract API to get mac_phy_cap based on hw_mode_id
and phy_id
Change-Id: I9a6abdac8799d167828f13bef61b1a1d8c3e9769
CRs-Fixed: 1113888
qcacld-2.0 to qcacmn propagation.
Don't Tag Non-WoW packets as Runtime PM packets after
wow suspend. Some WMI Commands can be send in Runtime
PM context and MC thread context. Packets coming via
MC Thread Context can be tagged as Runtime PM packets
when runtime pm in progress.
Packets should be tagged in the same caller context to
avoid any race condition. Being stability issue, addressing
this issue by not tagging any non-wow commands as runtime pm
after wow suspend. This will ensure all the non-wow packets
coming after wow_suspend flag is set as non runtime pm packets
and will trigger a runtime resume.
Git-commit: 4a396d80c5cc2ded75098c61426521b9b2762c17
Git-commit: 2ee4bf4791cc5db30ec03eceaf591367deffe39a
CRs-Fixed: 1106496
Change-Id: I4e55733ad8403581aca0b49ce9442fc5591335c0
Propagation from qcacld-2.0 to qcacmn.
Several Action frame categories are not processed in host and they
are not forwarded to supplicant either, but they are dropped in host.
These unprocessed action frames are forwarded to host by FW and
wake up host unnecessarily which leads to battery drain. With this fix,
host conveys FW the disallowed action frames list at HDD startup
so that the remaining frames can be dropped in FW itself thereafter
when under WoW mode.
Change-Id: I40b49d42df94085784c8f1d8321de0ee61473ae0
CRs-Fixed: 999114
There is a regulatory requirement for Specific Absorption
Rate (SAR) whereby the phone transmit power is reduced
when it is determined that the phone is in close
proximity to the body.
Implement a vendor command interface to set SAR power
limts dynamically.
Change-Id: I0a214a2af780e9dd8c381c4e9eaa7d8cab6ef853
CRs-Fixed: 1098102
A new iwpriv command has been added to configure the period
and wlan duration for a btcoex duty cycle.
As a part of this registring the wmi_service_btcoex_duty_cycle
for WMI_SERVICE_BTCOEX_DUTY_CYCLE.
Also send_btcoex_wlan_priority_cmd registrtaion for btcoex
duty cycle command in non_tlv_ops.
Change-Id: I7f3bfdfd9804566d6d0b7cce7025e99db57d0e23
Acked-by: Basamma Yakkanahalli <ybasamma@qti.qualcomm.com>
CRs-Fixed: 1064437
Add helper routines to extract TLV params in WMI EXT service ready
event. These helper routines abstracts all TLV related information
providing APIs to extract ext serivce ready params.
Change-Id: Ic989331856ed2f9376965bdec4b658328f9e470b
CRs-Fixed: 1079237
qcacld-2.0 to qcacmn propagation
To debug the fwr stuck issue as early as possibile,
reduce the wmi max pending command threshold to 256
from 1024.
Change-Id: Ic3cbe26cca979dcaa68fca03e6fe1af397cf0c4f
CRs-FIXED: 1080761
Add TLV changes to pass DISA parameters received from
WMA and pass them to firmware for firmware
to encrypt data and send back to driver.
Change-Id: Ic6928a93f799c47518fbbad96564062f595287dd
CRs-Fixed: 1072545
qcacld-2.0 to qcacmn propagation
As Current WMI interface need both the ARP/NS configuration
in single command. To support active offload host need to
cache the ARP/NS at wma layer so host can fill the other
request and configure down to firmware complete request
(ARP+NS).
Change-Id: Ie0a57d216379817ff0ae48f4f582c9108e8ecca1
CRs-Fixed: 1067683
These fixes are made during qca8074 VP control path bringup.
Add fixes in tlv.c and enable TLV helper routines for WIN.
Fixed some inconsistencies in wmi API params by adding compiler flags.
This needs to be cleaned up so that API and params have common interface
between WIN and MCL.
Change-Id: I0821daa58df86ad0b394a7846a982a9e3577cd14
CRs-Fixed: 1063252
This change implements the Non-TLV WMI API for setting bandwidth
fairness. This WMI command was implemented as part of the recent WIN SW
release. This change ensures it is adapted to convergence code structure.
Change-Id: Ib9984c43b91b105bfb4687a7591f4fab509febc4
CRs-Fixed: 1060577
Add changes to allow coexistence of WIN/ MCL TLV implementation
through use of CONFIG_MCL flag and change of MACRO names.
Change-Id: I6868c288a43fd3afb19c84b8a9d4ef0dfbee5c94
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
Compilation fixes made to compile TLV on WIN code base.
Also, Previous gerrits used WMI_NON_TLV_SUPPORT for all
compilation fixes of WIN vs MCL, using CONFIG_MCL and
CONFIG_WIN wherever it is found appropriate to keep it
consistent with other modules.
Change-Id: I1c129d736746556210c46f3122e2739d233e1d6b
Acked-by: prgandhi@qti.qualcomm.com
CRs-Fixed: 1008872
qcacld-2.0 to qcacmn propagation.
oem data request len size should be of 4 byte instead of
1 byte.
Add changes to correct len size in wmi unified API.
Change-Id: I9b377420c50ff1160964f94be5eaa0072df0f63d
CRs-Fixed: 1013488
Fix the occupied channel list that is being passed from CSR to
WMA to WMI to firmware.There is a conversion happening in
WMA from channel number to frequency which is the root of the
issue.
Change-Id: I8a2f8c9d31897b38086df26ebd386ec59d0f3540
CRs-Fixed: 1039020
More detailed logging needed for mgmt frames
Add vdev_id, frame type, subtype, and channel to logs by defining wrapper
function around logging macro and calling it from send_mgmt_cmd_tlv
Change-Id: I0c8c26e3194d97be7d903f64c5c5909c2d4b9799
CRs-Fixed: 1011346
Initialize bad peer tx control data structure in WMA,
send down the initial configuration info to fw and
configure the peer status update setting in the tx_rx module.
CRs-Fixed: 975526
Change-Id: Ib380e10a0b343b6a8f9c2c0bf6d6dd602d2601c5
Dwell time can be modify based on channel congestion per scan
request.
Add changes to enable firmware to use scan control flag and select
dwell time optimization algorithm based on ini values.
Change-Id: Iea3de57c1b7d087442e4b8984b4184d24bb8c930
CRs-Fixed: 994443
1.Logging of all WMI activities(commands, tx complete, events)
is adapted for WIN.
2. WIN and MCL continues to use existing approach of memory
allocation and it is managed using feature flag in common code.
3. Use debugfs for WMI event debugging.
example to read buffer through debugfs interface -
- Navigate to WMI directory under debugfs (/sys/kernel/debug/WMIx)
- It will display elements/files for all command/event buffers
- "cat wmi_command_log" (desired buffer name)
- Output will display something like this:
CMD ID = 16001
CMD = d 0 d8c6de24 e1cf
CMD ID = 16001
CMD = 8 0 0 0
CMD ID = 16001
CMD = d 0 d8c6de24 e1cf
CMD ID = 16001
Change-Id: I26895b480b9eaa400183c4667b9ac6980939cab9
Acked-by: Pratik Gandhi <prgandhi@qti.qualcomm.com>
CRs-Fixed: 1019979
Add host support for WMI POWER DEBUG command to control mac_core power features
for run time debugging.
Change-Id: Ifc810b24222507f1445a84a54caa8aee5e815b38
CRs-Fixed: 1007598
Replace the WMI command WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID
and event WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID with
WMI_PDEV_SET_MAC_CONFIG_CMDID and
WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID respectively since
the former are obsolete. The new WMI commands and events
additionally carry the pdev id.
Change-Id: I77eab3ead005bbb7f951ce7e077cd661813cb628
CRs-Fixed: 989502
Replace the obsolete WMI command WMI_SOC_SET_HW_MODE_CMDID with
WMI_PDEV_SET_HW_MODE_CMDID and event WMI_SOC_SET_HW_MODE_RESP_EVENTID
with WMI_PDEV_SET_HW_MODE_RESP_EVENTID respectively. These new WMI
commands and events additionally carry the pdev id and all mac id
references are replaced with pdev id.
Change-Id: If2a3f93dcd1947eedce8d4eac8ed936166f7e078
CRs-Fixed: 989502
Replace mac_id with pdev_id for WMI pdev commands and
vdev start response handler to support multi-radio in
converged firmware. In order to maintain backward
compatibility with old fw, host needs to check
WMI_SERVICE_DEPRECATED_REPLACE service id in service
bitmap and needs to fill pdev id or mac id accordingly.
Change-Id: I7e6b40b4c0bd20e967dc0a383b480068e256486f
CRs-Fixed: 994415
WIN platform uses non-tlv implementation for host to
target wmi commands. Add support for non-tlv
implementation in common wmi layer.
Change-Id: I1f832695b0d41b521be6b18df0cad31aae11b6c9
Acked-by: Kiran Venkatappa <kiranv@qti.qualcomm.com>
CRs-Fixed: 1005778
