Once the radar is found, identify the affected sub 20 MHz channels in the
current channel. From the position(s) of the sub 20 MHz subchannels, find
the nearest valid puncturing pattern.
If a valid puncturing pattern is found, find the corresponding reduced
bandwidth new channel for the legacy ( <= 11AX) devices and send CSA. At
the end of CSA, do a vdev restart so that the 11BE devices see a new
puncturing pattern.
And If not found, then fallback to the default behavior of changing channel
using Random channel selection.
Change-Id: I41e6206f310722bc3dacc9ce8d024f679ff1af3e
CRs-Fixed: 3386022
In very noisy environment and with 6 GHz co-located AP, scan
database size of 300 might not be enough.
So increase the size to 500.
Change-Id: I26077b2ab0d24f73a7c8e29990504d5b284eccf4
CRs-Fixed: 3395834
Remove WLAN_ENABLE_AGEIE_ON_SCAN_RESULTS macro as BSS age
is calculated using NL80211_BSS_SEEN_MS_AGO
Change-Id: I5473f9cea216df4968a43551875b0385605f616f
CRs-Fixed: 3391078
Add critical update feature code. If BSS parameters change
count (BPCC) is changed, the value of cu_flag returns from
function lim_check_cu_happens is true. It can try to update
the critical update IEs code logic per cu_flag.
Change-Id: I39445a75e747e6e00a29be726fd447b9fbc7fb17
CRs-Fixed: 3296181
Current code does not use the SSR host log collection API.
Fix this by adding SSR host log collection API usage.
Change-Id: I364bd6281e886e8c50dfd6f45f78fb98e822f962
CRs-Fixed: 3339953
When component dependent functions calling from higher
modules or any other components, it uses ucfg APIs pattern.
Calling ucfg dependent APIs is acceptable for higher modules
like HDD, OSIF but for another components like DP to avoid
using ucfg APIs here, implementing component APIs for existing
ucfg APIs to other components like NAN, vdev_mgr in DP
component module.
Change-Id: Ia5431c7de7fc944aacf5c8a328072a8ec31e8f3f
CRs-Fixed: 3351496
Create sysfs file for direct link unit test command to
generate traffic from LPASS.
Add ini to enable direct link unit testing.
Change-Id: I5b143bc6751eedb1a65cd836ea738744b72cc2cc
CRs-Fixed: 3365576
Enable the feature CNSS HW Secure Disable only when
CONFIG_CNSS_HW_SECURE_DISABLE is enabled.
Change-Id: Ib0e01360f8ee9390290487c097c3d821f17485f8
CRs-Fixed: 3360826
Fix issue that driver doesn't report puncture cap to kernel and hostapd for
undefined MACRO.
Enable a new build flag CFG80211_RU_PUNCTURE_SUPPORT when kernel code
contains nl80211_put_ru_punct_supp_bw.
Change-Id: Ib375c248065b4899f2d336155b1f71a5359e6fb7
CRs-Fixed: 3356751
Currently wlan_mlme_configure_chain_mask API sends many
pdev set param commands separately to firmware.
Combine all pdev set params of wlan_mlme_configure_chain_mask
send to WMI to reduce number of transactions.
Also replace target wmi pdev params with host wmi
pdev params to fix existing broken layering
violation.
Change-Id: If0b7bce9a7c87d0f07e7a9f1d2cd80139f027308
CRs-Fixed: 3151438
Enable the WAR to handle incorrect setting of first msdu
in mpdu flag for an mpdu with more than 6 msdu.
Change-Id: I7f7219828f2787b889a26092476bd76b97dee149
CRs-Fixed: 3363780
Add AFC common include path to regulatory include path.
Enable AFC feature for sdxlemur.
Change-Id: I6b936b3f6443868f05cf86351bcf31d24d65bbbc
CRs-Fixed: 3154178
set CONFIG_DP_TX_COMP_RING_DESC_SANITY_CHECK for Def build to
enable TX completion ring desc sanity check.
Change-Id: Ia9cd28f6bcce234d0e7bf7f621cc33208479e899
CRs-Fixed: 3349744
Observed NAPI of REO2SW1 hard to complete caused by slow CPU/schedule
on REO2SW1, hence IRQ of REO2SW1 keep disabled during the polling which
impact other MSI as well in single MSI case, until hit REO2TCL timeout
and crash.
The fix is complete the dp rx NAPI poll and re-enable the irq if the
irq disabled for long time.
Change-Id: Iad53b39c8b8d6a99a9006149e7579f8dc3c93e39
CRs-Fixed: 3134851
Adds support to parse and save t2lm ie from beacon or
probe response in t2lm database
Change-Id: Ieea735200ab0ae120c01b632687a82ca972459dc
CRs-Fixed: 3337174
Add initial version of QMI files that are used for
communication between WLAN host driver on APSS and
WiFi driver on LPASS.
Change-Id: If7352490d73457479e85958b90066f9c397bb310
CRs-Fixed: 3328378
For kiwi_v2 target increase the value of max MLD dev contexts
to three. Define WLAN_UMAC_MLO_MAX_DEV with the new value in
kiwi_v2 defconfig file.
Change-Id: If9f86cbf5c98f69b9f56b0e4226fcf26f2b663c3
CRs-Fixed: 3337651
Disable CFR/EPPING/NAN/more_tx_desc/OEM DATA and
RSSI_MONITOR/APF/P2P_DEBUG/P2P_LISTEN/SPECTAL_SCAN
Update wlan_hdd_debugfs_offload.c for APF compile error.
Change-Id: I8ede890b0b821cec5f03f2ede535f34d8883638d
CRs-Fixed: 3332742
Enable NAPI schedule latency histogram stats in debug mode
which helps to debug the NAPI shcedule delay issues.
Change-Id: Idc58a5c2eab6fcb9ac55ab04cf083982d0aed003
CRs-Fixed: 3318049
The feature raises a pulses at specified interval in TSF time domain.
The pulses can be used to determine driver level latency between hosts
as they are operating in same TSF time domain.
Add ini "g_tsf_accuracy_configs" to configure parameters for TSF accuracy
feature to customize GPIO pins and interval.
Change-Id: I49609d5beba8043ac2ecc086e97b01d1e0b2d3f6
CRs-Fixed: 3277992
Enable the feature to drop the packets which are
arriving from PMAC on which monitor vdev is not running.
Change-Id: I2a5056f40e961102d01b5776577bd11a551a780d
CRs-Fixed: 3319409
Introduce the feature to hide SSID in the logs.
To enable this feature, set CONFIG_WLAN_TRACE_HIDE_SSID to y.
If this feature is enabled, SSID 'my_ssid' will be printed as
'*' in the logs.
Change-Id: I97ef84ecdcbfd1b36b7874cfc30760f5fda5df14
CRs-Fixed: 3294520
Current code has wlan_coex_public_structs.h in qcacld, when it should
be in qcacmn due to convergence of the COEX feature.
Fix this by moving the header file to qcacmn.
Change-Id: Id45c85e0ff492d149cac71c8c0ca5443b879ef15
CRs-Fixed: 3289250
In kernel 5.15 and above a new member is introduced in
station_parameters structure to move link specific variables.
This change will port the driver code to make it compatible.
Change-Id: I3a1a05961bb5e747d946ffa8314319f898ef7b97
CRs-Fixed: 3304240
Currently, files related to spatial reuse are compiled
based on 11AX feature flag instead of SRP feature flag
and OBSS_PD feature is disabled always.
Fix is to avoid dependency of spatial reuse compilation
on 11AX and conditionally compile spatial reuse based on
SRP feature flag and Enable OBSS_PD feature based on 11AX
feature flag.
Change-Id: Ia5a882f7c842c3c2979da9b73139c59af765d23c
CRs-Fixed: 3306965
Add below two enhancements for SAP
1. Spatial Reuse enabled in single MAC concurrency
2. Set bit HESIGA_Spatial_reuse_value15_allowed in SRP IE
Change-Id: Id2d3d04ae1b3b9a2e6d84f30749b577bc7b79061
CRs-Fixed: 3305447
Move 11be_rate sysfs entry implementation from HDD EHT main body
to separate source files and define WLAN_SYSFS_EHT_RATE feature
flag accordingly in Kbuild.
All sysfs implementations shall be built only if CONFIG_WLAN_SYSFS=y.
Hence correct dp_tx_delay_stats and the closing endif.
Change-Id: I84aa7fc34aeff932bb51800e70c4c3611bf0d627
CRs-Fixed: 3309689
For kiwi target, there is no MSDU_START tlv, and hence
the tlv information has to be obtained based on MSDU_END.
Enable this flag, which is used for monitor mode frame
processing for KIWI target.
Change-Id: I160133a92b5f8b79573717b53f248c24935a67eb
CRs-Fixed: 3304764
Currently implemented change for COAP causes to append
header files to INCS even if CONFIG_WLAN_FEATURE_COAP
is disabled. This leads to compilation hard stop due to
overflow of argumnets to shell.
ie, by moving COAP related code under feature flag can
help to reduce shell arguments when COAP is disabled.
Change-Id: If1f8334229a601f7415cbad876a7c9e0fcfb1370
CRs-Fixed: 3299853
Add WLAN_FEATURE_SR to enable/disable
Spatial Reuse support which is futher
dependent on 11AX support.
Change-Id: Iaa6f2a50c073eb279f967b6820bf5551bf100e3f
CRs-Fixed: 3301884
This re-introduces the orignal patch which shutdowns WLAN in system
suspend prepare.
Orignal patch Id1f5172a7fc1792c83c8c1c20127de815f7e4980 is reverted by
Ic82db9dc0ca9d6686df99926335af27abc61cdb5 for deadlock issue.
However, deadlock between cnss_pm_notify and unregister_pm_notifier is
not caused by Id1f5172a7fc1792c83c8c1c20127de815f7e4980. So restore it
and add flag to enable/disable feature shutdown wlan in system suspend.
Deadlock issue is caused by "up_write(&cnss_pm_sem) is invoked before
down_write(&cnss_pm_sem) in function cnss_pm_notify". The issue can be
fixed by changes I533c373b85f554fbcceb562d9f56c6b88e5155bb and
I7768fdbeb1fa8cd6ef3b260eb0aafb231aeed324.
Change-Id: I25e4398a8d3b1a52cf7bc554af74d123ec797c6e
CRs-Fixed: 3287742
Enable feature to get TSF timestamp by reading scratch registers instead
of getting it via WMI.
Change-Id: If910b54b3c56499af0967312cbcc4654e09b43fe
CRs-Fixed: 3287540
Currently the Vdev Ref Leak functionality prints holders of references
every 10 seconds, resulting in only two prints before a device crash.
Fix this by reducing the timeout macro from 10 seconds to 4 seconds.
Change-Id: Icc1046a5678d4b224c2bc715d27fed092836e269
CRs-Fixed: 3292752
