Send unified ll_stats and get_stats request over qmi based on INI
configuration.
Change-Id: Icc43352c1ba19696148619100ee27fda4d5ffb41
CRs-Fixed: 2791043
Currently driver can handle only one radio stats event,
if the size of radio event exceeds more than the size which
can be accommodated in single WMI event in that case FW needs
to send multiple radio stats events.
Add support in host to send WMI capability to indicate FW
that host supports the multiple radio events.
Change-Id: Ifb89419715c87959095c0c88a23c8dd650d456e7
CRs-Fixed: 2783251
Currently ll_stats and get_station requests are sent back to back
from user space. The firmware time difference between these two commands
results in extra sleep and wakeup for Q6.
To avoid this extra Q6 sleep and wake, send both requests in a single
command from the driver if the firmware supports that operation. Cache
the get_station results in the driver until user space request reach
to the driver.
Change-Id: I5e6f42f9e3836ef4bf61d3d9220f8cedb775cbd5
CRs-Fixed: 2778479
Add peer assoc parameter 'peer_bss_max_idle_option' to
update the peer's Max BSS Idle option cap to FW.
Change-Id: If7fd4369bade8b289655c491849562c2357de877
CRs-fixed: 2781050
Host add support to send WFA test configs to FW using WMI command
i.e. WMI_WFA_CONFIG_CMDID.
Change-Id: Id9bdec16c69a8c16cb4ce1fac87688023c768ee6
CRs-Fixed: 2772004
Firmware advertizes the capability to allocate CMEM memory for
FST via a WMI service flag; adding the support for the same.
Change-Id: Ic33bf0584f5ce4880fdfe5abe8fd4cf2a653a06e
CRs-Fixed: 2771256
Set "action" field when send WMI_THERMAL_MGMT_CMDID
to firmware. Then driver can configure the target management action
based on different customer requirement.
Change-Id: I3da5eea0d756444ede816be5cb74407863d63781
CRs-Fixed: 2767144
Donot block wmi command sending inside #if macro.
This change is needed because WIN uses only the FW log level
setting and not the complete feature. Only the feature
should be enclosed in #if macros and not the wmi command
sending part.
Change-Id: Ia28c0487d360c1b0a54374bb237811eba6b1af41
populated fils discovery, unsolicited probe response from
vdev extension stats and populated to APSTATS.
Change-Id: I762d7f36fa45f9048cf591bde3550a415e23bdcb
Firmware expects the channel property WMI_CHAN_FLAG_NAN_DISABLED
to be set if NAN is not allowed on any channel. Firmware shall
check the flag and decides whether to enable NAN/NDP on that
channel.
Change-Id: I8e283d2cd0f83a43e04dad142b09d519ef7f0db3
CRs-Fixed: 2760348
This change allow Tx VDEV of MBSS mode to configured
dynamically by reset the VDEVs.
This change includes FW service bit parsing, checking
VDEV state of all VDEVs, sending MBSS information in
VDEV start command
Change-Id: I46b13629bd1c07be86b408d72c2967642ce8542e
CRs-Fixed: 2759229
For older targets thermal mitigation is supported for the apps.
In moselle there is a new processor wpps on which firmware runs,
this commit adds the support for the thermal client wpps.
Change-Id: Ia212cd08c000ab11d4079cc701634dd919447ae9
CRs-Fixed: 2757932
Add service bit support for channel tx and rx time in channel stats.
This service bit helps in not interpreting the default values for
tx_time and rx_time when new driver version is used with old firmware
where this tx_time and rx_time support is not present.
Change-Id: Icc7668f5842677ac6ef48176568301753e217ea7
CRs-Fixed: 2751500
Retrieve the max users per-PPDU supported in Uplink
and Downlink direction, from the fixed params of WMI
service ready ext2 event.
CRs-Fixed: 2747218
Change-Id: Ib9f9bd4313dd1955c607d4fe77b02e34761d1c20
The driver doesn't copy the current rssi threshold for the
periodic roam scan trigger.
Copy the rssi threshold value for Periodic roam scan trigger
also.
Change-Id: I6745d5d6e011299d3fee9f89785083138b330183
CRs-Fixed: 2752991
Currently, stats over QMI features can only be disabled over build flags,
which is not flexible. Hence, add a CFG ini item to enable/disable stats
over QMI.
Change-Id: If5d57d2fc781fecc8817c2da8f61a2f7977d9c77
CRs-Fixed: 2752310
FW advertises scan radio capabilities as part of service ready
ext2 event. This is an optional TLV, presence of which indicates scan
radio support for the that pdev.
CRS-Fixed: 2746769
Change-Id: I5a0231c54375e9f00c85f0ad92839e2fa6c79f39
Special vap type is used by scan radio solutions.
Indicate special vap type to FW through
vdev create WMI command.
CRS-Fixed: 2746724
Change-Id: Ie5e4b059306c5c80d93dba0ebb4810b3e570878f
Add service ready parameter to update the capability for Preamble Puncturing
Tx support from target. Add WMI support for configuration of Punctured
band setting from Host.
Change-Id: If5714c162356c35c7c385c4596043c0bc671be9a
Save BTM BSS termination timeout value and BTM MBO assoc
retry timeout value coming from FW through
wmi_roam_trigger_reason_tlv_param tlv.
Save Blacklist reason, Source of adding AP to BL, timestamp
which indicates the time when AP added to blacklist and
Original timeout value in milli seconds when AP added to BL
coming from FW through wmi_roam_ap_info_tlv_param.
Change-Id: I0a328814e77c7d2452672f43c855d2c1b8646b66
CRs-Fixed: 2744255
Add WMI support for WMI_TWT_SESSION_STATS_EVENTID. This event
contains stats for a given TWT session.
Change-Id: Ieca2b6845fd2ec32ccdfb1021611bed07379d365
CRs-Fixed: 2609951
Save info related to WTC BTM roaming coming via
wmi_roam_trigger_reason_tlv_param.
Change-Id: Iec089ba48b2ff30c09838119144b2b0f0abf9e65
CRs-Fixed: 2740598
In 32-bit systems, currently there is possible oob access in
send_stats_ext_req_cmd_tlv() is preq->request_data_len is
uin32_t max and len is also of type uint32_t.
Fix possible OOB access while sending ext stats request message
to firmware by validating the requested data length against the
difference between wmi max message size(WMI_SVC_MSG_MAX_SIZE),
size of the wmi command fixed param and wmi tlv header size
WMI_TLV_HDR_SIZE.
Change-Id: I769c9a6b7c0e0f76e2ec1070cac6c69768816454
CRs-Fixed: 2724256
Add 'tx_flag' param to wmi_mgmt_params structure for configuration
to use incorrect key for encryption of mgmt frame.
The 'tx_flag' param is primarily added to provide additional
test configuration options for mgmt frames.
Currently it only has support to encode the mgmt frame with
incorrect key for PMF protected connection.
Change-Id: Id894c735c4c612a75506a33938372c3fa2e7f24a
CRs-fixed: 2690147
Add new channel bonding pairs as well as frequency
pairs for 40, 80 and 160 MHz with the support of
three new 5.9 GHz channels 169, 173 and 177.
Add new API reg_modify_chan_list_for_5dot9_ghz_channels
to enable/disable these new channels based on
INI value and service bit.
Change-Id: I8598e705ba4047e96e7167661ba70d4236cde251
CRs-Fixed: 2696211
FW sends a disconnect request to HOST while roaming failure
through event WMI_VDEV_DISCONNECT_EVENTID per vdev id.
Process WMI_VDEV_DISCONNECT_EVENTID and issue disconnection.
Change-Id: I0d3d2ddf0cab65eecbfc7676e9b21f2cc19971e2
CRs-Fixed: 2731954
Pdev parameter WMI_PDEV_PARAM_SR_TRIGGER_MARGIN is added to configure
the safety margin which will be used in calculating the acceptable
interference level for PSR based Spatial Reuse operation.
Add the host abstraction for the same parameter.
CRs-Fixed: 2729664
Change-Id: Iae542d4f7de23520ee00719e721d81e32737a191
Define a new vdev param to set corresponding bit to enable/disable
a particular NAN feature.
Currently, Framework configures NAN DW as 4 seconds when the
device is in sync role and the screen is off. But customers might
want this to be 512ms always irrespective of screen off/on.
Send the vdev param on NAN vdev by setting the "bit 0" to 0 to
indicate firmware to ignore framework configured DW value and
consider the firmware default value.
Change-Id: Idcbdae94bd6a96fbbe15ec103a0aa558cdfcd572
CRs-Fixed: 2721980
Add WMI LOG for set peer parameter for debug
purposes like set peer_nss, peer_nss_160
CRs-Fixed: 2726041
Change-Id: Ib1a3d22cd101b76efc07121fc333d303b1a26377
Add interface changes for WMI_VDEV_BCN_LATENCY_EVENTID which
is sent by firmware to indicate the latency IE received from
connected AP in beacon.
Change-Id: Ia6cec01be89f13885b011414f0d77f64c6eb05ee
CRs-Fixed: 2723226
