Currently, MAC address update is supported only when interface is down.
Because of this framework needs to issue interface down and interface
up to update the MAC address. Interface down and up will lead to VDEV
delete and VDEV create commands to the FW.
To optimize Host-FW interactions during set MAC address, add support
to update the MAC address without bringing the interface to down state.
Change-Id: I76afa8f8c2504e8271bf689392d526f994afff0a
CRs-Fixed: 3063201
Add support to send qos null frames received from firmware on
STA interface to mon interface based on config value. The config
value get update based on vendor command set by user.
The packet filter check in ucfg_pkt_capture_process_mgmt_tx_data
moved to target_if_mgmt_offload_data_event_handler. So that we
will not allocate any buffer if filter is not set.
Change-Id: I426b340c5a65711ada971062af95ae039d18d0bd
CRs-Fixed: 3076241
New files are added in qcacld-3.0 to have cld
specific (e.g. roaming) MLO manager changes. But the inc
directory path is not added to INC list in Kbuild and
it's causing compilation issues while compiling the
source file wlan_mlo_mgr_roam.c
Change-Id: I2801a3a5fd04dac7e35fca3a43017bb1d6fd2b10
CRs-Fixed: 3095730
Enable monitor mode for WCN7850.
Enable the interrupt based processing in monitor
mode for WCN7850.
Change-Id: I6f8c6951794d0754977fa0d45086a95df25a13e6
CRs-Fixed: 3095456
Currently there is no provision to get the calibration failure
information from the driver. Because of this it is getting difficult
to debug the calibration failure issues.
To simplify the calibration failure issue debugging, add support to
parse calibration failures events in the driver.
Change-Id: I6d831804cca259862fea3e8bb4af33d556138d43
CRs-Fixed: 3078926
Enable TX AST index search for HMT STA which is more efficient
compared with older source address search.
Change-Id: Ie5ebf4199ada959ebd33351929cf642c21657c51
CRs-Fixed: 3084026
Kbuild change to
- Disable timer irq for CE in WCN7850
- Disable status ring timer WAR in WCN7850
Change-Id: I59a247bf14450c5e1ec194c505f3a00eb5f3619f
CRs-Fixed: 3075871
Add path of final version (E3.0 R38) of cleaned up HW header files
with comments removed and appropriate copyright added.
Change-Id: I5b65141d68672da6368f71132ad583ed1fc3db53
CRs-Fixed: 3076670
Add the support for the feature of Full Power Down while
in low power mode.
For this feature, it need to power down wlan chip when
suspend, and power up wlan chip when resume, so need to
change to call wlan driver shutdown and then power off the
wlan chip instead of calling wlan driver suspend when do
suspend, and changing to do power on wlan chip, download
wlan firmware, and calling wlan driver reinit instead of
calling wlan driver resume when do resume.
Change-Id: I293647175c151da0fd6628345f98ea65c83b1bb3
CRs-Fixed: 3061366
In some scenario, it is required to receive every ARP/NS packet even
it is not to solicit address itself. So add this vendor attribute
configuration to enable/disable ARP/NS offload on fly.
On some platform, if target suspend to WoW mode, APF filter will drop
such ARP/NS packet in the front, so prevent runtime suspend happen
if disable ARP/NS offload. System suspend still allow in consideration
of potential power impact.
It only support on STA/P2P-Client mode device, and this configure is
optional, while default behavior is ARP/NS offload enable. It will
restore to default behavior if interface being closed.
Change-Id: Icd49e230024bc1ce51519cd9fafee9bc9f79f382
CRs-Fixed: 3058494
Enable config flag to use multiple tx and tx completion
ring pairs for qca6490 when IPA is disabled.
Change-Id: Iafa6df504d7be55cbc5a233d6975963f0e118df5
CRs-Fixed: 3059736
Cleanup WMA HWMODE and WMA HWMODE List
as the same functionality is already taken
care by policy manager
Change-Id: I5dc1342422e70737111f882013ed3a6351a85336
CRs-Fixed: 3064739
For beryllium, use sw_exception bit to indentify is it FW
reinjected frame or not, if sw_exception bit is marked, then
skip FISA for these kind of frame.
Change-Id: I6ca74c244c366641a7bcfddff2834550b1e5b472
CRs-Fixed: 3056157
Enable the below datapath MLO features in Kbuild
- DP_USE_REDUCED_PEER_ID_FIELD_WIDTH
The above feature reduces the width of peer_id from
peer_metadata, thereby reducing the size of the peer
object array.
Change-Id: I58533c241a40184129786f11a47f3722cf005a61
CRs-Fixed: 3059637
Since the code under FEATURE_HAL_DELAYED_REG_WRITE_V2 has been
removed and cleaned up, removing the build flag from Kbuild.
Change-Id: I66072af952877881fb700869ae4774e4f1a388cc
CRs-Fixed: 3056477
Monitor mode code has been restructured into 1.0 and 2.0 directories.
Update Kbuild path to reflect the same.
Change-Id: I59e79decd269a394b21c30e0685015e6ff16e772
CRs-Fixed: 3027215
Add support to offload icmp feature to fw in case of
suspended state to avoid high power consumption.
Change-Id: I3ff19d71eac530c75be57e6b52b975e755ff2a53
CRs-Fixed: 3042452
wma to target_if convergence code is guarded under the feature
flag ROAM_TARGET_IF_CONVERGENCE and it's is enabled currently.
Remove the flag usage and remove the deprecated code(else part)
also.
Change-Id: I6973d9c366ec6a9c6164dd19f6f4775dd3ebf5f0
CRs-Fixed: 3049942
Add a sysfs to display DP stats on console. Sysfs file
displays requested stats on console and wlan logs.
Change-Id: Ifd56d1bf6f578a4ce3f1d963040e6d3cd138c64a
CRs-Fixed: 3035860
Provide below APIs for easy mesh.
API to get the current frequency of the given VDEV.
API to get acs status of the given VDEV.
API to get cac status of the given VDEV.
API to get/set bandwidth of the given VDEV.
API to get band information of the given VDEV.
API to get connected STA count of the given VDEV.
API to get BSSID of the given VDEV.
API to get SSID of the given VDEV.
API to set channel of the given VDEV.
API to get/set cac timeout of the given VDEV.
API to get/set country code of the given VDEV.
Change-Id: Ia0bd201ad8155a66a4a8c5517f6fa43f3f358505
CRs-Fixed: 3027192
Fix few missing attribute in below connectivity events:
QCA_WLAN_VENDOR_DIAG_EVENT_TYPE_EAP_RESPONSE
QCA_WLAN_VENDOR_DIAG_EVENT_TYPE_ROAM_SCORE_CURR_AP
Also send the roam candidate info properly to userspace.
Change-Id: Ia9c4f095316adf8f40294f1e119cad648749bb72
CRs-Fixed: 3037650
KERNEL_SUPPORTS_NESTED_COMPOSITES := y is used to enable nested
composite support. The nested composites support is available in
all GKI & QKI kernels beginning with
5.10.20, but unfortunately is not available in any upstream kernel.
When a QKI kernel is used the flag is not set explicitly on the
kernel sources. Current logic sets the flag for GKI kernels only.
So extend the logic to set the flag for QKI kernels also.
Change-Id: I96aa36628aaf66f194c14f8883674da205220117
CRs-Fixed: 3041134
Enable ROAM_TARGET_IF_CONVERGENCE to enable the
wma to target_if roaming convergence code.
This is a temporary change and shall be reverted by
removing the define ROAM_TARGET_IF_CONVERGENCE usage and
the legacy code(i.e. code present in else part).
Change-Id: I840573b4699f23b7633b8049741a57a0dda975a7
CRs-Fixed: 3039950
Add new files for connect/roam logging. Add changes to
initialize the logging buffer.
Make changes to support enqueue/dequeue log.
Define enums for MAIN_TAG, Sub TAG, category.
Add structure definitions for logging buffer.
Change-Id: I1d283fcf464da90d4f5533214d480ddda156ec27
CRs-Fixed: 3013486
Currently driver don't have any feature flag for connection
roaming ini config and it directly tries to read the connection
roaming ini file, on some of the platforms if this ini file is
not present it returns failure message but some of the platforms
results in timeout which results in unexpected behavior.
To address above issue add a feature flag to read connection
roaming ini config.
Change-Id: Ica4159533e46ca5cc2048bf50eab2290bf5ae7d5
CRs-Fixed: 3035148
Network package timestamping is optional for TSF feature,
to make it configurable, add a new build flag
WLAN_FEATURE_TSF_PLUS_SOCK_TS.
This flag will be set only when CONFIG_WLAN_SYNC_TSF_PLUS
is enabled and CONFIG_WLAN_SYNC_TSF_PLUS_DISABLE_SOCK_TS
is not.
Change-Id: I413e85fadf93264cd41c2739b6d870aa08d60efb
CRs-Fixed: 3027378
In order to support four STA default interfaces
to be created and up after driver loaded, it
requires setting bmiss_offload_max_vdev=4 to
Hastings fw. So export this variable to be
configurable and can be modified if in need.
Change-Id: I25db5dd72de7d45c6be682891abba711edaf20dd
CRs-Fixed: 3030148
Currently max vdevs are defined as 6 in osif. Increase it to 9
in case of 11be.
Change-Id: If64306cfc55690d7523ee910074064051a1b1d78
CRs-Fixed: 3027377
Add support for CFR feature for adrastea target. A new feature
flag CONFIG_WLAN_CFR_ADRASTEA is introduced for this purpose.
Also adrastea do not support enhanced CFR so when only
WLAN_CFR_ENABLE and WLAN_CFR_ADRASTEA are enabled, some
compilation issues are seen as CONFIG_WLAN_ENH_CFR_ENABLE is
not set.
Fix these compilation issues as well as introduce a new feature
flag to add support for CFR in adrastea.
Change-Id: I52bc235c4d271004698163897c15721023410017
CRs-Fixed: 2705119
Use CONFIG_CNSS_OUT_OF_TREE to control if CNSS family drivers are
built from in-kernel-tree source or out-of-kernel-tree source since
the exposed header files will be in different paths. This is also
for backward compatibility.
Change-Id: Icc1253f65a596c8579424f056dcd0fcb5e73a4a1
CRs-fixed: 3022566
The current way in the driver to handle CONFIG_CNSS_UTILS=m and
CONFIG_WCNSS_MEM_PRE_ALLOC=m will not work if the flags are not
coming from kernel Kconfig directly (e.g. CNSS utils and prealloc
module sources are built out of kernel tree) since "cppflags-
$(CONFIG_FLAG) += -DCONFIG_FLAG" will not take effect if CONFIG_FLAG=m.
Fix it in a proper way which is same as handling CONFIG_CNSS_GENL.
Change-Id: Iab4bf34bd1ae89f947bc5f7080e18569810f5f58
CRs-fixed: 3022560
Add support for sending WMI_REQUEST_THERMAL_STATS_CMDID
to request for the thermal stats via vendor cmd:
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_THERMAL_STATS
This vendor cmd can either be used to clear the thermal
stats or to request for the thermal stats.
Added ini gThermalStatsTempOffset, which can
configure thermal temperature offset value for capturing
thermal stats in thermal range such as Thermal STATS
starts capturing from temperature threshold to temperature
threshold + offset.
If this ini is set to 0, then the events are disabled.
Also, add support for the FW event where the requested
thermal stats are sent in FW event
WMI_THERM_THROT_STATS_EVENTID().
The following attributes are sent in the events for every
level:
STATS_MIN_TEMPERATURE
STATS_MAX_TEMPERATURE
STATS_DWELL_TIME
STATS_TEMP_LEVEL_COUNTER
Change-Id: If8acdeec5bde33be346332ccaf39d78d0151203d
CRs-Fixed: 3016818
