Fix AP+AP IPA offload path failure when NAPI over IPA enabled on mdm
platforms by adding QCA_CONFIG_RPS check.
QCA_CONFIG_RPS is same as CONFIG_RPS, default Y, but depend on CONFIG_SMP
as msm-5.4/net/Kconfig.
For AP+AP mode,
For LA, CONFIG_SMP on, then QCA_CONFIG_RPS on, use IPA exception path.
For mdm, CONFIG_SMP off, then QCA_CONFIG_RPS off, use IPA offload path.
For IPA napi enable status check, just use qdf_ipa_get_lan_rx_napi,
don't need MACRO IPA_LAN_RX_NAPI_SUPPORT.
Change-Id: I6b16f2a830d4e7829c9e539896ed2977895d367e
CRs-Fixed: 2992393
Add feature flag for conditional compilation of feature to enable
p2p+p2p on a device.
Change-Id: I2c95b39c3db6e51213f7625383c365799fff9e31
CRs-Fixed: 2991307
As part of new implementation for 802.11BE MLD(multi link device)
address also need to be generated, derive the address during the
driver probe for max supported MLD's.
Change-Id: I092aac0607a6b7e9e420b1c82a61869cc0b8a2d4
CRs-Fixed: 2993460
- Generate association response for secondary MLO links
- Update pe session and connect resp with partner link info
CRs-Fixed: 2977970
Change-Id: I17a820abef4f4df082c1f219f35599f669142670
Add CONFIG_WLAN_TSF_UPLINK_DELAY option for uplink delay feature
and enable it on WAIPIO.
Change-Id: I91f8433e853efb177bb1d9aea42cdc7f625a0d4e
CRs-Fixed: 2996368
Enable CONFIG_HIF_CPU_CLEAR_AFFINITY flag to
change rx_err_ring irq cpu affinity.
Change-Id: I3d2475210ffd5ac6acef7e0418eef26cf92e1302
CRs-Fixed: 2950630
Enable config flag to skip MSI configuration for
monitor status and destination rings in MISSION
mode.
Change-Id: If295a5afc6731bbec1ad7182590e0015f3a911ba
CRs-Fixed: 2992169
Add sub vendor command support for extended avoid frequency
list(QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT). It will
exclude the channels that application doesn't prefer and
update to regulatory component.
Change-Id: I5164a0b2c4769e9749ef0e8140bded3f530087d4
CRs-Fixed: 2974529
With this change introduce featurization for dump in progress
and move implementation related to this feature to new files.
Change-Id: I4614aecde57a9c5ffec765f3afaa943c58956132
CRs-Fixed: 2979226
This reverts the change to do the memset of SW2TCL desc consumed by
HW to zero.
Change-Id: Ie56207cf483643f6e294df23f5445ca853a75d51
CRs-Fixed: 2984818
Currently we use hardware based feature flags in Kbuild file to
enable/disable certain feature flags. In case hardware changes, then we
would also need to edit Kbuild file to enable feature flags for the next
target. Instead, use CONFIG_<FEATURE_FLAG> from defconfig files to
enable DP feature flags. This will limit the changes for hardware update
to defconfig files only.
Change-Id: Icc8aa6ad51904946f9141a0f41728ed72b1f6d2f
CRs-Fixed: 2964342
There is potential risk when starting CFR and resume happens at same
time. Wake lock is added to CFR component, and this change enables
wake lock for enhanced CFR.
Change-Id: I1ebe8c11fad66b66adcad0b551756abf2c010cde
CRs-Fixed: 2977699
Enable connection manager LFR2 code path, then all targets which are
using LFR2 will switch to connection manager code path.
Change-Id: I37f831596699d39e635d88ee88faf841f3a36063
CRs-Fixed: 2968850
When FEATURE_HAL_DELAYED_REG_WRITE enabled, also enabled
SHADOW_WRITE_DELAY to avoid back to back shadow reg write.
Change-Id: I8d48496814e063ebd441db3520e3a5406c5db13e
CRs-Fixed: 2967202
Add debug log to print more details about the link vote id when
PCIe link suspend is not allowed.
Change-Id: I5069202436e0da37b8ae22f84e28ac06d35002b5
CRs-Fixed: 2964957
Enable the wlan IPA events for P2P GO/CLI mode for qca6390 to avoid RX
packets get dropped due to IPA interface context is not created.
Change-Id: I1e2c5e4085874280779d8d8d07efdb1f33e6d90b
CRs-Fixed: 2853271
Set the newly added flag for wlan_cfg80211_crypto_add_key():
set to true if the request is from north bound, false otherwise.
Move processing of install key complete event into
crypto component.
Change-Id: I981e3722966c5b44255b3e29b7df3fbccfa087c8
CRs-Fixed: 2839454
Add support for QCA_NL80211_VENDOR_SUBCMD_GET_RADAR_HISTORY vendor
command. This command will return the current NOL list in driver
and the last Radar detection result in previous SAP active state
(includes CAC state).
Change-Id: I719630c39b89c1813ca05c4356dce627d72d82e2
CRs-Fixed: 2966501
Added flag for HTT HTC tx based completion. currently
packet are freed using htt htc misc list.
Change-Id: I2e7e4d59cadf30f4bb14eaefc045240d1ebc1aaa
CRs-Fixed: 2922547
For some of the stability issues triggered by H.W,
by the time host detects it most of the QDF history
is getting overwritten to avoid this increasing QDF
nbuf history. So that there will be less chance of
events getting overwritten.
Change-Id: Ia4bad1a175976af2e56126b56ae8c92a988e4289
CRs-Fixed: 2942868
Avoid obj mgr logging of get ref API print on console
for MCC as it leads to excessive logging and assert.
Change-Id: I75fb9381a7c122f4d7701888da35c7e38836250e
CRs-Fixed: 2941196
Enable the history support to log Tx descriptors programmed
in Tx and completion HW rings.
Change-Id: I5ce308354714da78baa05500bc73e1a9ec91b958
CRs-Fixed: 2935363
obj_mgr_alert() function is currently used in
wlan_objmgr_iterate_log_del_obj_handle() to print and is causing
spinlock to be held too long and timing out. Thus, increase the
periodicity of LOG_DEL_OBJ_TIMEOUT_VALUE_MSEC to 10 seconds.
Change-Id: I48a7b2ce031393493b9d19c9dd365a725c60284e
CRs-Fixed: 2930279
For api's in wlan_hdd_rx_monitor.h, replace target
specific conditional compilation with feature specific
conditional compilation.
CRs-Fixed: 2819131
Change-Id: I2678192ad5dbb1a4515bd04e67ca23f71f92a2d1
Tx MPDU aggregation is not happening in HE80 11ax connection
resulting in low throughput for HST.
Fix is to enable TX_AGGREGATION_SIZE_ENABLE for HST.
Change-Id: Ieca8464991a6a194d6f02b70fe4972aca288b541
CRs-Fixed: 2925514
IPA_WDI3_TX_TWO_PIPES is added to enable two TX pipes
configuration for IPA WDI 3.0 interfaces.
Enable IPA_WDI3_TX_TWO_PIPES on sdxprairie platform.
Change-Id: I34fe0af56b169ebad9d7bb29b38838dd44503736
CRs-Fixed: 2750082
CONFIG_CNSS_UTILS is controlled in the msm kernel config, while it is
not in the customer kernel.
Since it is a wlan feature, make CONFIG_CNSS_UTILS as wlan driver build
option, so that driver can enable this feature dynamically when building
wlan driver.
Change-Id: Ib8232a67da33e4613524c67cead5b90014fd371d
CRs-Fixed: 2922303
