Few APs are sending bar frame right after sending a
packet but the packet is not received and its retry
is received with the same sequence number. As SSN
is moved ahead due to bar frame, this packet is being
dropped.
To fix this, allow all frames to get delivered to stack.
Change-Id: I17f7126c8d318415e88b037b72563cf53cb14066
CRs-Fixed: 3151908
Add feature support to tag first packet that wakes up HOST from WoW.
rx_pkt_tlv.rx_msdu_end.reserved_1a field is used by TARGET to meet
such request.
Change-Id: I3d37e13e8cff49bc4f622d3070a19e4c4be56417
CRs-Fixed: 3137621
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
simple Alloc is being used in RX path which avoids
certain debug logic. during free of nbuf we should
avoid this debug logic else it will report it as
double free, this will be triggered only when debug
is enabled
Change-Id: Iadb40071fb733cc4de3291784df5075d5a099a8e
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
Introduce a new flag "BE_PKTLOG_SUPPORT" for beryllium specific
pktlog support.
Change-Id: If91156541b322905ad5d97cf2d9d7ae687290ecb
CRs-Fixed: 3115832
1. avoid accessing CFG parameter in per pkt path.
2. Access peer, vdev and pdev only when current peer_id
is different from previous peer_id.
3. Avoid HKv1 and v2 checks in WDS learning path.
Change-Id: Id7fb7a29c642480f8ca58738dbb0c92130e44ecd
use dma_inv_range call instead of dma map and unmap
APIs during replenish and reap. This complete code is
under a compile time macro.
before change: 4160Mbps @ 96.5% (core 3)
after change: 4160Mbps @ 90.5% (core 3)
Change-Id: I61bca349a369ace06cd86f353880108cee013cb1
Use the tracepoints to trace delayed register write, ce
tasklet scheduling latency, tx, and rx packets.
Change-Id: I63a89276177a9d0466dcb0c831eeb8e938a2bf79
CRs-Fixed: 3081870
This change will enable packet logging for the fragments
from RX monitor status ring and send it to the pktlog module
for post processing through WDI event.
Change-Id: I283a20e7d0fa1f9b88223a989beda529beff6718
CRs-Fixed: 3074184
For IPQ products, there is 1 refill ring which is of hardware type
and host replenishes the buffers onto this ring so that hardware can
use these buffers for Rx.
In IPA offload mode, the buffer replenishment model is different from
the one mentioned above. There are 3 refill rings, out of which,
2 are software refill rings (1 for host and 1 for IPA), and last ring
is hardware ring given to FW.
Ring given to IPA is to refill the buffers after processing the
regular Rx packets and ring given to host is to refill the buffers
after processing of exception packets. Since there are 2 entities to
refill the buffers, the hardware ring given to FW multiplexes these 2
software rings and provides the buffers to hardware.
Make changes to follow above replenishment model for SDX+Pine
integration.
Change-Id: I0d9e4ec811a3023a258e0a6b9ee22ccdffcebafa
CRs-Fixed: 3049633
Avoid using ast_entry in intra_bss handling, instead use
da_peer_id directly from the msdu_metadata
Change-Id: Ic586f297e8e393504d7d399cff7a67c3035aa11f
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
This change includes below
1) Changes needed to increase Tx rings to 4
2) Use WBM2SW4 ring for rx error in QCN9224
3) memset srng at alloc to avoid populating RBM_id
in per packet path and enable implicit RBM
Change-Id: Icbd5ac2378273b8f3c6adc41c611e29551fff22f
In Beryllium the HW does the ast lookup and match
and sets the intra-bss bit in the msdu_desc_info
structure of reo_destination ring and WBM Rx release ring.
So, change the Beryllium code to make use of this
hardware assistance for intra-bss.
Change-Id: Ic7c89efc741fefe35603082309204fbe3c9a97c7
The function dp_rx_update_protocol_tag is called from
dp_rx_mon_update_protocol_flow_tag which is enabled when either
WLAN_SUPPORT_RX_PROTOCOL_TYPE_TAG or WLAN_SUPPORT_RX_PROTOCOL_TYPE_TAG
is enabled.
However the prototype and definition is enabled only when
WLAN_SUPPORT_RX_PROTOCOL_TYPE_TAG is enabled.
So adding the dependent macro to the prototype and definition
of dp_rx_update_protocol_tag
Change-Id: Ic1120b77d527dc8ceeb981bb6516816e4658bdcb
CRs-Fixed: 3022319
Add changes to register separate function pointer to receive EAPOL
frames instead of using regular RX path and adding export symbol
for __qdf_nbuf_data_get_eapol_subtype() to access in it multiple
modules
Change-Id: Id05b982d31a7e008536d10dd5281e88cceba96db
PATCH[7/7]:
This patch consists following changes:
-Conditionally compile all monitor destination ring related code
Macro used QCA_MONITOR_PKT_SUPPORT
-Add QCA_ENHANCED_STATS_SUPPORT macro to conditionally compile
enhanced stats support
-Use QCA_MCOPY_SUPPORT and QCA_TX_CAPTURE_SUPPORT macros
to conditionally compile MCOPY and Tx capture features
respectively
-Use QCN_IE macro to conditionally compile BPR
feature
-Use QCA_ADVANCE_MON_FILTER_SUPPORT macro to conditionally
compile advance monitor filter feature
-Fix vdev attach issue for special and smart monitor vap
-Fix status ring initialization issue.
Change-Id: I0deaa28a9a54bf34b0f41e6dd510fdd8d4992db2
CRs-Fixed: 2983780
PATCH[6/7]:
This patch consists following changes:
-Move monitor related pdev variables to struct dp_mon_pdev
-Move monitor relted soc variables to struct dp_mon_soc
-Move cookie to monitor link desc va to monitor file
-Add APIs to access monitor related variables
-Add dummy APIs to build without monitor support.
Change-Id: I032a480b1383d061f984cee3ba6b10ac7a0ff350
CRs-Fixed: 2983781
Implement core DP rx processing to functions in to corresponding
architecture specific be/li rx files. Keep common utility functions
in DP common files.
Change-Id: I40083e10772fd2b6ce2f1fa9e197f2ad92d0522a
CRs-Fixed: 2891021
When a msdu scattered across multiple nbufs is received
in REO2SW ring and the remaining nbufs are not yet
available in the ring, loop in dp_rx_process is exited
without resetting the invalid bit in the ring desc cookie.
This will result in an incorrect assertion failure when
the same entry is processed the next time.
Fix is to reset the invalid bit in ring desc cookie
when the loop is exited in the above msdu scattered
scenario.
Change-Id: Ie5cfa1fb8ea1db4b7a0a4837545ecbfdfbb8719a
CRs-Fixed: 2916296
The bridge forwards the multicast packets to all the
interfaces attached the bridge.
When the STA network interface receives such packets
from bridge and send it to the AP, it is echoed back
from the BSS.
These packets are not intended for the bridge as it
will lead to looping.
Add a check to detect and drop such packets when
received back from the BSS.
Refactor dp_rx_mcast_echo_check function to fix
compilation errors from the above change.
CRs-Fixed: 2894272
Change-Id: I3f9e92c3598af11d3ff4e6b9b8afbc4110a926fc
Refactor WLAN_FEATURE_PKT_CAPTURE_LITHIUM to WLAN_FEATURE_PKT_CAPTURE_V2
to remove hardware name from compilation flag.
Change-Id: I5a30b33d8bd6065d12e7c89c666c2f0cab66344e
CRs-Fixed: 2869827
Currently rx descriptor debug info API's are under RX_DESC_DEBUG_CHECK
feature, making those API's independent will be enabled with new feature
flag RX_DESC_LOGGING.
Change-Id: Iadb087f1b3104311b06e161bdeae975a8772e0ee
CRs-Fixed: 2869335
The memory below 0x2000 is reserved for the target use,
so any memory in this region should not used by host.
But on some third-party platforms, we observe such
memory is allocated for RX buffer, which cause HW/FW
NOC error, then RX is stuck. To address this,
re-allocate RX buffers when small buffer appear.
Change-Id: Iad118e82f3fe10f92cbf5f7388dc0960542fc03c
CRs-Fixed: 2707190
Add support to process RX offload packets in packet capture mode.
To distinguish rx offload packets from normal rx packets,
DP_PEER_METADATA_OFFLOAD bit is set in peer metadata, based on value
of this bit rx packet is delivered to stack or packet capture
component.
Change-Id: Ice656a0bc14efd0382c4949d695daa8e926ce41e
CRs-Fixed: 2856792
Add previously freed nbuf and buffer start address info in rx descriptor.
This helps in debugging use after free access of rx buffers.
Change-Id: I1c883bf049ce75dd0413b85946fe2982648d8004
CRs-Fixed: 2827151
Low memory profiles like 256M and 16M profiles support
only NSS Wi-Fi offload mode and HOST data path APIs are
not used in NSS offload mode
Disable HOST data path APIs which are not used in both
NSS Wi-Fi offload mode and in HOST mode (in NSS offload mode)
CRs-Fixed: 2831478
Change-Id: I6895054a6c96bd446c2df7761ce65feef662a3cc
If a continuation bit is set in msdu desc info and reported
length can fit in single buffer avoid SG processing
Change-Id: I6e8c3e1e657c372d5d915450dda20ba26bac495f
Assertion when detecting rx desc nbuf sanity check failure to get more
info in the RX refill buffer ring for default version.
Change-Id: I8d0255e2f13e2b993f5651b788f895ea06187bf9
CRs-Fixed: 2800602
When multi page alloc is activated, spinlock for rx_desc_pool
is being held for more than 2 seconds, resulting in QDF_BUG.
The major proportion of the time period is used in unmapping
the nbufs.
To fix this, lock rx_desc_pool only to collect nbufs from
rx_desc in a list and unmap and free the nbufs after releasing
the lock.
Change-Id: Iff2078a0de56b51712e2f9a7c5ace7a959e2445d
CRs-Fixed: 2779498
We have come across scenarios where rxdma is pushing
a certain entry more than once to the reo exception
ring. In this scenario, when we try to unmap a buffer,
it can lead to multiple unmap of the same buffer.
Handle this case, by skipping the process of this
duplicate entry, if alrady unmapped, and proceed to the
next entry.
Change-Id: Iae66f27e432f795ba4730911029fa1d63a75cb06
CRs-Fixed: 2739176
Memory optimization of monitor status ring by allocating buffers during
replenish using alloc_skb (linux API).
It creates buffer of required size rather than 4k size(dev_alloc_skb)
Change-Id: I3ae5e403de28c4570f8ac3b50d3ca878a9e4b2f9
CRs-Fixed: 2733931
Rx desc pool have a flag to identify whether frag or nbuf
operation needs to be performed for alloc, map, prep and
free buffer for monitor dest buffer.
This flag will be set only for mon destination desc pool,
if RX_MON_MEM_FRAG feature is enabled.
In all other case, It will be set to Zero and default nbuf
operation will be taken.
This flag get initialized at the time of pdev rx_desc_pool
initialization and gets reset while pdev deinit.
Mon destination buffer will have support for frag if
RX_MON_MEM_FRAG flag is set.
Change-Id: I67c6c823ee4f114035b884c024a1a9054a40665b
CRs-Fixed: 2741757
Same back to back link descriptor address/cookie is observed in
WBM idle link desc ring.
add duplicate link desc check when host
refill link descriptor to WBM through SW2WBM release ring,
also REO reinject ring.
Change-Id: Iaf9defd87670776fa9488d7f650efa3c08fefa60
CRs-Fixed: 2739879
Th nbuf sanity can fail in case when HW posts the
same buffer twice. This case can be handled gracefully
by just skipping the processing of the corresponding rx
descriptor.
Change-Id: I471bb9f364a51937e85249996e427f15872bda97
CRs-Fixed: 2738558
DP RX changes to support RX buffer pool, this is a pre-allocated pool
of buffers which will be utilized during low memory conditions.
Change-Id: I8d89a865f989d4e88c10390861e9d4be72ae0299
CRs-Fixed: 2731517
