Add a ini control field to control rx frame pending check
logic in WoW case. In some cases, power consumption is more
important than rx frame ping loss, so add a control flag
Change-Id: I8c4d3725edddb82a0f06dc70c22a8dd5243209f2
CRs-Fixed: 2806786
In monitor mode, as part of VDEV delete, monitor mode
poll timer is stopped; it is good to reap the monitor rings
once after timer stop to avoid crashes that arise due to
RXDMA2SW ring backpressure.
Change-Id: Ib15b3398087073ad053616c6aa68e295eaebdd17
CRs-Fixed: 2796608
mcopy mode uses monitor destination ring to sniff mgmt frames,
send enable/disbale full monitor mode by sending HTT msg to FW
when configuring mcopy.
Change-Id: Ie9510bda223861c13054abac640b2c879c4d334d
In monitor mode, if channel is initially configured from 5G
band and then moved to channel from 2G band, packets are still
received on MAC-0 RXDMA2SW ring since IMPS is disabled for both
MACs. Since driver reaps only MAC-1 RXDMA2SW ring, ring full
condition is hit for the MAC-0 ring causing ring backpressure.
Fix is to drop packets received on the non-monitoring MAC
ring.
Change-Id: I49cb276827f4a06791183ee3fe8c88ba84df085d
CRs-Fixed: 2791341
A htt message arrived after ipa context is freed as part of
deinitialization which was dereferenced by event handler
assigned to pdev->ipa_uc_op_cb, resulting in crash.
To fix this, during deinit pdev->ipa_uc_op_cb is deregistered
and assigned NULL before freeing up ipa context.
Change-Id: I8125cb104a538e88cda93960f7443129fabd850a
CRs-Fixed: 2793295
Compiling with gcc 9.3 will cause many implicit-fallthrough
compile errors.
Fix is to add keyword fallthrough to resolve such compile error.
Change-Id: I2e7dd1525861d951e3be44f6665e149499f0f5d6
CRs-Fixed: 2785178
Add API to do IPA Tx buf SMMU-S1 unmapping and register it
with cdp ops for Hastings, also assert if map/unmap failed.
Change-Id: I4071b5fccd84c3c97b9dccc40c6f798d70993189
CRs-Fixed: 2792170
In teardown API update logical delete state to peer
before deleting AST entries of peer. Also in delete
AST API use __dp_peer_get_ref_by_id to get the peer
Change-Id: I6db227a284cf3726cc241ebc98386230eca58fcf
Add a new cdp datapath ops - mscs_ops for Mirrored
stream classification signalling feature. This function
will be invoked from ECM flow acceleration manager
Change-Id: I749623846395057b6ea8328c881efa8733700b0e
This change fixes the below issue.
1. Clear the histogram statistics per peer.
2. Separate out the Tx/Rx histogram prints.
Change-Id: I5fc51f6bca14dc4c615c5501441e1a6b28bb0f02
Add support to configure REO ring threshold through ini
for WLAN_DP_PER_RING_TYPE_CONFIG feature.
Change-Id: I02a14adcf243905ab25c2af12cb9499f32ff453f
CRs-Fixed: 2789147
Deinit of HTT stats debugfs files from dp_pdev_detach to prevent
deleting of files after 'wifi".
CRs-Fixed: 2782235
Change-Id: I77d86225762063af16bc8c2b716ca834698f1520
1. Register peer->osif_peer for per-STA netdevice delivery.
2. Wi-Fi 3-address frame packets received would be processed
through AP netdevice.
3. Wi-Fi 4-address frame packets received would be processed
through per-STA netdevice.
Change-Id: I102874ea1de9fba40ab7f0e2c32c9de1c9b4d075
In addition to firmware capability, add INI param to decide FST
placement in CMEM.
Change-Id: Icc5fdfa49e35665b59efce3fc1f1855d84c16140
CRs-Fixed: 2778898
Firmware advertizes its support to place FST in CMEM,
export this capability to DP.
Change-Id: I265246bcfd38a36e34c4ede66e117a92bb185032
CRs-Fixed: 2772238
Drop frame if it is not for the vap, to which
client is connected.
Enable this check only for ap.
Change-Id: I33d7eb79267490bdb8697e4e45f789e9f6279f0e
CRs-Fixed: 2756304
- Added data structure for wds ext peer
- Enhanced DP peer structure to maintain
wds ext peer data structure, which inturn
maintain pointer to osif device.
- Enhanced DP vdev structure to maintain feature
configuration, which will be updated during vdev
creation when feature is flag is set at control
psoc.
- Enhanced cdp_vdev_param_type and cdp_config_param_t
to set wds ext configuration into DP vdev
- Enhanced cdp_cmn_ops structure and corresponding
call back definitons to get peer id, which will
be saved in osif private structure and to set
wds ext peer rx.
- Enhanced cdp_ctrl_ops to send event to control
path when 1st 4 address frame is received from
backhaul.
Change-Id: Ide0ea54e7b2d480ad646fb84b6e4e3108930f986
CRs-Fixed: 2773492
The logging macros implicitly takes care of embedding function name
in the log, hence there is no need to include __func__ again.
Getting rid of redundant __func__ reduces driver memory footprint.
Change-Id: I26bfac840ac6732ac83fb008db8e1702996eb21e
CRs-Fixed: 2774457
With new design, peer is deleted from hash table in
cdp_peer_delete. Hash table search in dp_peer_can_reuse
API at cdp_peer_create will always fail
Update the peer reuse logic to search from inactive list.
Insert peer to inactive list from cdp_peer_delete() and
in peer reuse case search in inactive list to get
peer.
Also add a new lock to protect peer state transition
Change-Id: I2e672fc4a9346c95d67716d437538dd0f96b2207
The 11g and 11a connections are latency critical and
hence the tx coalescing cannot be applied on traffic
running for these connections.
Add a CDP API to save the number of low latency
connection in the dtapath vdev handle. The Software
latency manager can use this information to decide
and skip the tx register write coalescing for packet
transmission on low latency connections.
Change-Id: Iff51867447e9d4537a3637cb65d94e184e4249ef
CRs-Fixed: 2769025
1. Add flag to support hlos id override feature in dp vdev
2. Update tid from nbuf->priority in dp_tx_send
3. Update tid to nbuf->priority in dp_rx_process
Change-Id: I66e8d77733a667f3f60b77e0d7bb444f7c5ad93d
dp_tx_pdev_detach API takes care of flushing
tx descriptors and multicast enhancement mem
cleanup
dp_pdev_deinit takes care of cleaning up the
above actions and dp_tx_pdev_detach is simply
a redundant piece of code
Hence remove dp_tx_pdev_detach API and call
dp_tx_desc_flush directly from dp_pdev_deinit
CRs-Fixed: 2769303
Change-Id: Ic798793e81eefc7dc905ca7552fdca13e9fddd8c
peer wlanstats context is used only for RDK Plume stats
but the name is misleading as wlan statistics
Hence rename peer's wlanstats_ctx to rdkstats_ctx and
the APIs the APIs around the same
CRs-Fixed: 2767192
Change-Id: I9e8955554b94fa29a3964fed729a95a4db67c8f6
Enable data path polling mode based on INI
dp_poll_mode_enable. Configure all data path
interfacing rings (UMAC/LMAC) and Monitor rings
in polling mode when NSS offload is disabled.
By default, poll mode is disabled.
Change-Id: I0e51207042811f517a423eb7276e3f33c5313450
Register IPA ready callback with IPA driver. The callback
sets ipa_is_ready flag in the host driver and kick starts
the ipa init sequence as part of which the Tx buffers are
mapped to IPA.
None of the IPA APIs are invoked until IPA ready registration
is complete.
Change-Id: I6570b2b347052164a274fbc22358ebf0719dcabf
CRs-Fixed: 2735107
Debugfs support for HTT stats under compile
time flag "HTT_STATS_DEBUGFS_SUPPORT".
Change-Id: I44c4f11265fdb3b9d53a9ac545e2945854bb9a57
CRs-Fixed: 2760947
Add logic to pre-allocate DP consistent memory and reuse later
on wifi on/off. This prevents memory fragmentation.
Change-Id: I1e5eb0da39950a5d028dd46d38ff715f283e53ff
CRs-Fixed: 2740889
Currently the rx tid spinlock is destroyed from
peer delete (based on peer state) or peer unmap handler.
This can lead to a race condition when the peer is
deleted before the peer map command is processed/received.
Fix the above race condition by destroying the rx tid
spinlock only when the peer handle is destroyed/freed.
Change-Id: Iaf7ccea11a95732c1aa20e66af6dd4a9a66517c5
CRs-Fixed: 2763533
As part of the VoW IGMP improvements, which deals with
conversion of igmp packets to unicast packets, the
following changes are done when the new feature is enabled:
1. IGMP/MLD packets with special addresses (addresses not
part of any multicast group) will be converted to all
existing clients of the AP. These packets will be
directly fed to igmp multicast to unicast conversion
module.
2. The IGMP/MLD packets with group specific addresses will
first go to multicast enhancement module, where they
will be allowed to pass and will be converted to unicast.
3. The new feature will be enabled only when multicast
enhancement feature is enabled, which will be ensured
at the configuration level.
FR : 61063
Change-Id: I2fd5a67766c806432fbe1a12cb9654a3600100f5
In roam HO failure, peer unmap indication is processed
even before Host initiates the peer cleanup. In the cleanup,
as part of cdp_peer_teardown, AST entries are freed up without
removing it from the peer AST list since get_peer_by_ref_id
returns NULL peer pointer as peer is moved to inactive state.
Fix is to delete peer AST entries as part of peer unmap
indication so that the entries are removed from the AST list.
Change-Id: I1b04517e8cc392b33bb439501e61e3d5534d8307
CRs-Fixed: 2763825
For QCN9000, full monitor is controlled through,
a. full_mon_mode ini param
b. QCA_SUPPORT_FULL_MON compile time macro
Currently enabling full monitor is not taken care under
macro QCA_SUPPORT_FULL_MON.
As monitor mode is not supported for 256M profile,
QCA_SUPPORT_FULL_MON is disabled.
Enable full monitor mode when both ini and macro are enabled.
Change-Id: Id5be5f7edc4739423fd74e28bb71a8f3339d87b3
CRs-Fixed: 2744622
This change will add a build flag support to MSCS wherein
the functions will be called based on the status of the flag
created. This flag will be enabled by default.
Change-Id: I1c234c710d3b37f534ed2df7b37343cbd65ab930
CRs-Fixed: 2757257
In tx desc store vdev_id to avoid unprotected access of
vdev memory.
In tx path pass VDEV as argument to all APIs
In completion path get vdev from peer as vdev reference
in peer is protected with reference, in places where peer
is invalid get vdev object using vdev_id stored in tx desc
with a reference count
Change-Id: I364ebb51143218872c0bc6f856772ab1df00bb17
CE2 status ring full condition results in WMI req timeout
in host resulting in self recovery being triggered.
Set IRQ affinity of CE IRQs to gold cores for defconfig
builds only. This is to alleviate the processing of all
DP rings and CE rings on CPU0.
CE2 status ring will be reaped fast enough to ensure host
has enough credits from FW to send out the WMI reqs to FW.
Change-Id: Ifef338faac17b44eae811d23ec41d89bde1b29c7
CRs-Fixed: 2738317
Add INI to modify the HW checksum capability advertisement.
Add hook to update enable/disable of HW checksum for vdev.
Change-Id: Idd0bad1d39c8411c7b4ef19483aa2c75a756791b
CRs-Fixed: 2732099
