Add support for demura v2 by adding demura blocks
2 and 3 for pineapple target.
Change-Id: I9e6107480ab44853ca49e6396787378c5c70557a
Signed-off-by: Mitika Dodiya <quic_mdodiya@quicinc.com>
Introduce support for SPR V2 features. Full validation
has been performed.
Change-Id: Ia83c06b30729fef12cae014ee5ce4792236a0a8a
Signed-off-by: Christopher Braga <quic_cbraga@quicinc.com>
Add support for UCSC block parameters that includes unmult,
IGC/GC modes, CSC coefficients, and clamps.
Change-Id: I3ef4b729e9c973a98d53dc583233bf5e004035fa
Signed-off-by: Alisha Thapaliya <quic_athapali@quicinc.com>
This change collects the OPR, MISR values. If the values are
different than the previous then notify to client with custom event.
Change-Id: I2546439be1f665d90e6505d65283d28096bf7cdd
Signed-off-by: Akshay Ashtunkar <quic_akshayaa@quicinc.com>
SPR hardware can be configured by user-space clients in bypass or
normal mode. Change adds support to allow clients to enable spr
in bypass or normal mode.
Change-Id: I04641774de91ec2b40af00c665ceffd72a255eea
Signed-off-by: Gopikrishnaiah Anand <quic_agopik@quicinc.com>
In Kalama for sixzone there are 2 new lut entries for saturation
high and saturation medium. There is also a new saturation
adjustment curve, and a SV enable feature.
Add entries in uapi to accomodate the corresponding programming
for these 4 new registers.
Change-Id: Ib9a8a4e233da25de90480c09c40536546f614a01
Signed-off-by: Alisha Thapaliya <quic_athapali@quicinc.com>
Some of the DPU hardware can have LTM2/LTM3 blocks.
Change adds register DMA to support LTM2/3 blocks.
Change-Id: I5703872994156b42decaaf6d383f8aded218c117
Signed-off by: Alisha Thapaliya <quic_athapali@quicinc.com>
Signed-off-by: Renchao Liu <quic_rencliu@quicinc.com>
Add check to clip the sunlight visibility scale to an upper limit of
MAX_SV_BL_SCALE_LEVEL * 4.
Change-Id: I8cc7bf8fba90e115d046ec030983801ce6d93c1d
Signed-off-by: Ping Li <pingli@codeaurora.org>
Signed-off-by: Yuchao Ma <yuchaom@codeaurora.org>
Add new properties to support dynamically turning on and off digital
dimming and setting new minimum backlight.
Change-Id: I3b94190877d556768ba2c92ec59432dec44de0de
Signed-off-by: Ping Li <pingli@codeaurora.org>
Rounded corner mask layer height/width should match the panel height
and width. Change updates rounded corner mask configuration check
to ensure that dimensons match.
Change-Id: I97f544b0a7df1ebea6d8aa3321813649ebc69d82
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Add a new connector property to allow DC dimming feature to set
dimming backlight LUT. This change also adds a connector event
for client to register for backlight info needed for digital dimming
feature, including OS brightness, OS brightness_max, panel_backlight,
panel_backlight_max, and scale factors from ABA and LTM features.
Change-Id: I78f713fb2b965ca24effd973b4dfa9ff07a852f8
Signed-off-by: Ping Li <pingli@codeaurora.org>
Introduce support for the FP16 format and FP16 color processing
blocks. This includes support for FP16, FP16 UBWC, and inline
rotation on tiled FP16 pixel data.
Change-Id: I06a70cab5447140598682f687129d4f8662524b2
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
This change adds the support for checksum collection and notifies
to user space as part of drm event.
Change-Id: Ib2a6c38c74d1fb60d274cdb685b74979202604eb
Signed-off-by: Lakshmi Narayana Kalavala <lkalaval@codeaurora.org>
A new position control register has been added to the DSPP PCC
on Lahaina. This register controls whether PCC is invoked
before or after GAMUT mapping.
Introduce a PCC UAPI flag to indicate if PCC should be placed
before the GAMUT block. By default PCC will be placed after
GAMUT.
Change-Id: I0bcc35e0ce7f87c7fa29922a6a485abe479d893a
Signed-off-by: Christopher Braga <cbraga@codeaurora.org>
DPU hardware supports demura feature, which needs to be controlled by
the user-space client.Change adds demura uapi structure for driver clients.
Change-Id: Ifa8c68b7f6a123af6451c110d53b3bc15240d45a
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
This change defines data structure for user mode program
to configure SPR block of MDSS hw.
Change-Id: Ia4edb5af757541309c50047f4b7476cac8ddd39f
Signed-off-by: Prabhanjan Kandula <pkandula@codeaurora.org>
This change programs dither based on user mode input data and
reprograms the dither when device comes out of power collapse.
Change-Id: I83be20c8eb2dc2221cc57cd2395f6512338ff6ef
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
This change enables display drivers code compilation
for lahaina target and current location of header files
is replacing the header files in usr/include/drm directory
before installing display specific header files. This change
ensures both the drm and msm_drv header files are exported
to user mode clients.
Change-Id: If6fc347598b902e670b7206dbcb82fe0740b3984
Signed-off-by: Shashank Babu Chinta Venkata <sbchin@codeaurora.org>
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
