For GKI2.0, the old drm_panel_notifier function could not
be used anymore, so removed it.
Change-Id: I858f90d7c39816dc95ab59f88c8988237319eadc
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Move away from the private and private_flags fields from drm_mode,
as it is being deprecated in latest kernel version. Instead, Add
msm_display_mode as a wrapper to be used in downstream to store these
parameters. Also, store msm_mode in connector_state to be accessed
in commit path.
Change-Id: Ia5bdebe75f00aa15fb7db4dc3a0d50c30894a95c
Signed-off-by: Orion Brody <obrody@codeaurora.org>
Upstream now prefers to utilize vblank enable and disable
through crtc hooks rather than drm driver. Remove
calls from kms vblank enable/disbale.
Change-Id: Ic6911838f14f93a0d277b7bdc2c1968270ec25a2
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Commit 62afb4ad425a ("drm/connector: Allow max possible encoders
to attach to a connector") enables additional encoders per
connector through use of a mask rather than encoder ids.
This change updates the driver when looking for an encoder
for the connector to look through the list of all possible encoders.
Change-Id: I69cc7c38cd0a9842ed2f15712feeb3c6b88daadf
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Nilaan Gunabalachandran <ngunabal@codeaurora.org>
Some DSI panels require qsync on/off DCS commands to be sent in
prepare commit phase. Add the hook for sending these commands
to the panel. If these commands are not present in the panel's
device tree node, it will be treated as a NO-OP.
Change-Id: Ida65512fe0214779dfa848f6c7b33644d3934afd
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Currently all the custom event register/unregister calls are
blocked based on the vm-ownership checks. Avoid this check
for connector events as it has only software updates unlike
the crtc events which directly touch the HW registers. This
allows the connector events to be registered before the first
commit where the VM ownership is obtained.
Change-Id: Id78e365929cb958ead10221b9267f1c1c0406a27
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Trusted-vm uses the cont-splash path to initialize the software
states by reading the hardware registers and populating the
SDE & DRM software states. But drm mode cannot be determined by
register reads, so rely on user-mode to get the mode which comes
as part of the first atomic_commit check phase which handles the
transition. The primary-vm user-mode passes the current mode to
trusted-vm through qrtr which is in-turn passed to driver to
set that particular mode.
Change-Id: I4fb86b40b8a0583c8edb539b0a51dcd33de731ff
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This reverts commit e8309fcbf5. Removing
the scratch register logic to pass information between the VMs as the
design changed from kernel to user-mode for passing the mode information
through qrtr from primary-vm to trusted-vm.
Change-Id: Ibfa4b0004496f68b272da808e866f5226b02c013
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
This change resets the plane and crtc dirty properties on
transition to other VM. This ensures when the VM acquires the
hw again all these properties on the new state are reapplied.
Change-Id: Id95676453eb9ae937b1b22f0e244b47449101cb0
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Currently, driver is always querying CRTC-0 to determine if
a TUI session is active or not independently of where the request
is coming from (PVM/TVM) and the display it is intended to. This
leads to an invalid CRTC selection in dual-display use case as
the CRTC must be dynamically selected depending on the display
selection.
This change adds helper functions to dynamically query the
CRTC with an active VM request and uses those helpers in
PVM ops.
Change-Id: I62ef46a1f23bb812287ab1545e444b90eb8f554c
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Currently, when starting a TUI session on a secondary display,
user-mode will select CRTC[1]/DSI-2 to initiate the session in
PVM and select CRTC[0]/DSI-2 in TVM to drive the frame. This
breaks existing cont. splash assumption that secondary display
will be using CRTC[1] in TVM session. Instead, driver can inform
user-mode of the possible CRTCs to use for each of the encoders.
This change sets the possible_crtcs variable on both DSI encoders
so that user-mode selects DSI-1/CRTC[0] and DSI-2/CRTC[1] in the
TVM use case.
Change-Id: Ic68f92901e42db80fb97799a05d11b5f3473af97
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Fix missing error handling in VM ops and add debug logs
to track DRM objects involved in TUI session.
Change-Id: If021ea5a38235386d6cea0b9ae3f753e9fce654e
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Currently, driver enforces that a TUI session is only happening
on a single display using the number of DSI displays. This check
leads to an atomic check failure for the dual-display use case,
since 2 DSI displays are connected at the same time. Instead of
using the number of DSI display, the validation check should use
the number of active displays.
This change modifies the validation check to use cont_splash_enabled
variable, which contains information about the interface state.
Change-Id: Ie820832df812c37ebff67f6083d6922d32cbd98a
Signed-off-by: Amine Najahi <anajahi@codeaurora.org>
Add logging during sde_kms_lastclose to know when driver cleanup
is being triggered. These traces are very helpful with debugging
shell stop/start issues.
Change-Id: I00ecc1287a3ee5cc096b7edc3f872e122b7d3fc8
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
If event register is called from LA VM when the HW is owned by trusted
VM, it will lead to a crash. This change adds checks to prevent illegal
register access when the HW is not owned by LA VM.
Change-Id: Ib4d956fdce4b5aae41e765d7355082c5e233efe2
Signed-off-by: Ping Li <pingli@codeaurora.org>
Add checks to block transition to trusted-vm when multiple encoders
are attached to a crtc. This ensures, concurrent writeback is
disabled before trusted-ui usecase. Additionally, avoid enabling /
disabling the IRQs associated with the cwb encoder during all
the transitions to avoid any unbalanced calls.
Change-Id: I022077018ac9b7dfb62506cfaddcb60cb8b35ed8
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Iterate over the crtc old/new state and decide which ones
to process by checking the active state of both during
the vm release in error cases.
Change-Id: Iab20e89792c53fb72e0c00f1fa5091616c7afbf3
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Fix the checks done as part of the trsuted-ui transition.
Allow full validation to go through whenever the new vm request
or old vm request is not NONE. Split the checks and the vm acquire,
so vm acquire can be done after all necessary checks are over.
Change-Id: I91165010ad110193c2ca3947af8c6504cd259919
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
In current implementation qsync min fps is single value.
It is same for all the list of supported dfps list.
Added support for new dt entry dsi-supported-qsync-min-fps-list
corresponding to the fps supported in the dfps list
dsi-supported-dfps-list.
Change-Id: Ifd5309c2f51865a3c0d9fadb65cbcd291b6ef42b
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Currently vblank enable/disable events are processed based
on the vm ownership check. Use the vblank helper functions
instead, during the transitions to avoid processing the
vblank from DRM framework level.
Change-Id: Icb2bd569e73d9206a234489a288320fecf631845
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Add changes to extend the current evtlogs for ease
of debug purposes.
Change-Id: Ibe136afbf25b8b8decfc06ef3868e3f628df4dcb
Signed-off-by: Jayaprakash <jmadiset@codeaurora.org>
Avoid crtc_state active_changed flag and explicitly check new/old
crtc_state active to decide if trusted vm transition checks are
required. As the active_changed might not be set at this point
in atomic_check sequence.
Change-Id: I142befad68359ae5ee862a1306bdc75531d63e70
Signed-off-by: Veera Sundaram Sankaran <veeras@codeaurora.org>
Commit Ifa100424733 ("disp: msm: sde: delay
encoder disable for clone mode") delays the CWB
encoder disable but it is also skipping the CWB
disable flush. That can cause the underrun on dp
display if it uses the same 3d_merge HW block. This
change reverts the portion of original code and
only delays the last cwb frame done wait. It still
keep the last CWB frame done wait as it is if crtc
is also moving to inactive state.
Change-Id: I3461188a35197f2925899ceea7ef705adf00a398
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Currently, trusted VM accepts and releases the resources
on RM notifications.
In cases, where TUI fails to submit the first frame on the trusted
vm, display cannot rely on the teardown commit IOCTL to release the
resources back to primary VM.
To handle scenarios where RM notification drops, the VM's should be
able to ACCEPT/RECLAIM resources without relying on the RM.
To address above scenarios, this change moves the resource handling
calls from notification handlers to user prompt. With this change,
trusted VM will ACCEPT the resource only on the first frame commit and
primary VM can RECLAIM the resources back if the TUI use case fails
or any of the RM notifications fail to deliver.
Change-Id: Iebb1724a7558e52567f8af1a49e38f8adbec88a0
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
When continuous splash is enabled, KMS populates the modes of
a connector during splash config. With TUI VM enabled, this path
will also be exercised by trusted vm for splash handoff, where for
a given display we try to use the same HW blocks configured by
the primary VM.
Since the trusted VM invokes the path under connection_mutex lock,
calling fill_modes will lead to a deadlock. So, move the connector
mode population during init for DSI displays, since the modes are
available for the connector during initialization.
Change-Id: I12f920f4af84b7bccc97a5f5edb5117ada49b960
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
If trusted vm is disabled, the DRM_PANEL_EARLY_EVENT_BLANK
notifier does not get called because of this touch early
suspend does not happen which leads to continuous touch
i2c transfer failure during suspend.
Change-Id: I6abaacb9f8343eec24d5642f7eda9e7c410fd8b7
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
In the current code during affinity change, irq cpu mask is
being updated without clearing previous pm qos vote. Due to
this, even after entering idle state, qos vote is still
present on other cpus. This change clears previous pm qos
vote before adding another.
Change-Id: Ic0326a09d37d03d5a8b0444362a6f1492993040c
Signed-off-by: Yashwanth <yvulapu@codeaurora.org>
In cases of adb shell stop, connector->state->crtc is
not updated which prevents panel power down
notification to be sent. In such cases updated crtc
from old connector state.
Change-Id: I94f9e5ad469d771cc673123b4e0cc65ea8f4653e
Signed-off-by: Raviteja Tamatam <travitej@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
Add a new mode DRM_PANEL_BLANK_FPS_CHANGE whenever there is
a change in fps and the power mode remains the same.
This will avoid unnecessary resume operations in touch driver.
Change-Id: Id3d5884ba862c864782636360e3832854464bf65
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Introduce low power mode so that listeners are aware when
display is going into low power mode. This requires moving notifier
inside sde code to be able to retrieve the low power state.
Change-Id: I8671e86af29c959d97e1b8ad758a07719ffa4bec
(cherry picked from commit c4b15f56dd63d24d6f4482deab2423809c700d7a)
Signed-off-by: Adrian Salido <salidoa@google.com>
[samtran@codeaurora.org: move changes to different file as
downstream use of notifier struct comes from different file]
Signed-off-by: Samantha Tran <samtran@codeaurora.org>
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
