Use microsecond timestamping for the tx descriptors
for capturing the latencies more accurately. It will help
to determine the appropriate bucket.
Change-Id: I216e083a7c89b01b6f2f384c1c0a85ca323d3a3e
CRs-Fixed: 3165153
In QCN9224, when 11v DMS feature is enabled use
FW based DMS support instead of SW based WAR.
Change-Id: Icc5b9740f71bd00862e06950e4fe49c663d513b4
CRs-Fixed: 3182547
Currently, in case where AP advertizes BA window size
which is different than our max supported BA window size,
the HW gets configured for BA window size advertized by
the AP, whereas the ADDBA response indicates the window
size of the STA, which is less than the AP.
This mismatch leads to the BA bitmap to be incorrect.
Fix this by exposing an API from datapath for the update
of the final BA window size which is populated in the
ADDBA response.
Change-Id: I81a039f47a775990b426e9aca1daaaa9bdb6e88f
CRs-Fixed: 3187941
For KIWI, STA AST index lookup search is enabled and remote
AP peer's AST index will be stored in STA Vdev if receive
AP peer htt peer map msg. but if STA TDLS connection happened,
host will receive another peer map msg for remote TDLS STA peer,
this remote TDLS STA peer's AST index will overwrite original AP's
AST index. if TDLS disconnected, STA vdev will still use remote
TDLS STA's AST index for TX, then TX to AP might fail.
Add is_tdls_peer flag in dp peer and configure this value by
cdp_peer_set_peer_as_tdls() from control path right after TDLS peer
created. if is_tdls_peer is true, do not store this TDLS peer's
AST index to STA Vdev, skip bss_peer flag setting as well.
Change-Id: I7b5df1caca6a0b5305a6e867cd92099b5f6a4890
CRs-Fixed: 3151035
Drop 3 address multicast packet on rx when vdev is
has drop_3addr_mcast enabled.
Change-Id: I726bdc9383ea6e5a052a5d754e8f48c98f9ce874
CRs-Fixed: 3163011
Add function to setup/reset lite monitor filters
whenever lite monitor mode is enabled/disabled
respectively through cmd line.
Also add function to configure rx header tlv dma length.
Change-Id: Ia5d8bc36e1d033b3e15737bb6b9854f6a7cdd5df
CRs-Fixed: 3143570
With new configuration changes for enable_peer_extended stats, update
code to peer_extended_stats naming for clean codebase.
Change-Id: I97a7ee331042232098382683fefebd05e6b099c3
CRs-Fixed: 3149920
This feature can be enabled runtime using sysfs interface.
Support is added to dump and clear the histogram stats.
The lower delay regions has to be more granular to indicate any
medium related issues for time sensitive XR applications.
Change-Id: I0a44a54d12d92ce016de349810cb2bedebaf9a58
CRs-Fixed: 2981006
Add support to change the tx_desc value to 65536. Some changes
to make the function argument as u32 type us made
Change-Id: I7cbde1b7ed4ab4e278c25c1ecfa94b7f673197f2
CRs-Fixed: 3130833
Rate statistics are updated at both peer and vdev level in Tx HTT
and Rx monitor path.
As per peer optimization changes, macro DP_UPDATE_EXTD_STATS is used
for aggregation of extended stats and this macro is used for both peer
and vdev stats query.
With this approach, when user requests for vdev stats, then rate stats
for vdev are updated with the rate values of the last peer present in
peer list of vdev and this results in wrong output.
In order to fix this, add an API to update the rate stats for vdev
separately.
Change-Id: I546a130e84f7fd577b80ace24e1dbb71000c0698
CRs-Fixed: 3132195
dp_is_hw_dbs_enable() is checking DBS and update number of
MAC rings value, current function name makes confusion.
rename it to dp_update_num_mac_rings_for_dbs().
Change-Id: I82540a943445560a99e27067e58d59035147208b
CRs-Fixed: 3131546
Ageout flush does not happen for WBM2SW4 if there
is only one TX completion pending in FIFO and all the
other WBM release rings are not active. This is due to
an issue in HW and this prevents suspend to happen due
to pending tx completions.
Fix is to avoid using WBM2SW4 release ring and instead
reuse WBM2SW0.
Change-Id: I250d8c9d460895449939212ebdb7abd62edb0234
CRs-Fixed: 3124733
Disable monitor mode on sdx65,it will save 5MB buf,
and improve iperf performance.
Dp_rx_buffer_pool_refill is used monitor mode in
MCC, and rxdma1_enalbe=0, we don't need this logic.
But in WIN side, only monitor mode need this logic,
and rxdma1_enable will set true.
Add func dp_monitor_pktlog_reap_pending_frames and
dp_monitor_pktlog_start_reap_timer in dp_internal.h
for compile issue.
Change-Id: I43fee6d7a1836063a7539c3bd4745eef15a4e4b2
CRs-Fixed: 3129542
Changes for vdev and pdev stats as per the new peer stats
re-organization architecture.
Change-Id: I48f9fb4b0915c40f4add83f2e2dd074cc97874fd
CRs-Fixed: 3092123
Changes to get and reset peer stats as per the new peer stats
re-organization architecture and taking MLO scenario into
consideration.
Change-Id: I1c49e11d502585cc955ad087ffe3a606be23d83e
CRs-Fixed: 3092123
Make changes in the APIs for printing of peer stats by passing
the buffer holding peer stats along with the peer.
Also define macros for peer stats aggregation as per the peer stats
re-organization architecture.
Change-Id: Ia03cdb145de7e7c3355463ac31313edd863dfd2b
CRs-Fixed: 3092123
* Initialize stats in dp_txrx_peer and dp_monitor_peer as per
the stats re-organization.
* Update peer calibrated stats on every timer expiry of 1 second.
* Define APIs to reset monitor_peer stats and to fetch rdkstats_ctx
from monitor peer.
* Place check to make sure that monitor peer related APIs are
are called only for legacy peer or MLO Link peer.
* Update peer based pktlog flag, tx and rx capture feature flags
in monitor_peer.
Change-Id: Idadbe19e85d4a9fdf77fb6dabe0c8a4952b024b8
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
EAPOL packets on MLO are destined to MLD mac address of the VDEV. So
we have to accept these packets as well, in case of MLO
Change-Id: If424d145341073806ba313f415e88a738360214d
CRs-Fixed: 3121164
Add function pointers to free buffer address stored in status buffer
and support tx monitor in legacy and Waikiki flow.
Change-Id: I28612d388009292ff751fe514183fb801909f485
Add more stats to cdp_soc_stats interface structure to ship it to
userspace. Move soc, delay and jitter stats apis from dp_main.c to
dp_stats.c.
Change-Id: Idb7f8b706e8744350d7fb2e8802d9303b3f25b5c
CRs-Fixed: 3084586
Prefetch TX HW desc, SW desc and SKB in pipeline fashion in Tx.
completion path.
This improves the UDP DL CPU idle% by ~4.5%
Change-Id: I48096e996cd835321ce2681d3981fa94c7189f54
Enable the interrupt based processing in monitor mode
for WCN7850, by enabling MSI interrupts for rxdma
monitor destination ring.
Change-Id: Ia3c4456d28ed58c8ef49a7aa8e711076fbdf9415
CRs-Fixed: 3094129
In WCN7850, there is only one common RXDMA dst ring for
both the mac.
Add changes to process the common RXDMA dst ring for
status TLVs corresponding to either MAC monitor status
ring. Also use arch ops to get rx_desc from sw_cookie.
Change-Id: Ia2c004755bc4389b587d995286093a519b995cab
CRs-Fixed: 3084442
Refine dp pdev vdev stats updating function to non-inline to avoid kasan
building failure.
Change-Id: I896f28831198632c61735ccc10ed4aedb30a8232
CRs-Fixed: 3085365
Following peer stats are updated in per packet Rx path:
to_stack
multicast
broadcast
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: Id7c11c025a8464951b615a7f7b006ce61db487fc
CRs-Fixed: 3067843
Following peer stats are updated in per packet Tx completion path:
comp_pkt: Pkt Info for which completions were received
tx_failed: Total Tx failure
In BE architecture, HW provides the support for basic vdev stats and
hence per packet stats updation of above parameters can be done only
when enhanced stats is enabled or HW vdev offload stats is disabled.
Avoiding per packet stats updation reduces CPU load and improves KPI.
Change-Id: I7090d1a1ce0a882236e3310e3e9517149cbb146b
CRs-Fixed: 3067843
In ME6 we are currently using a workaround to send the native wifi packet
through the exception path, as the older HKv1 hardware didn’t support
single packet AMSDU. Since, the hardware is supporting this starting
from HKv2, we are sending ME packets as normal packets to FW with
DMS indication in Peer based meta for Beryllium.
Change-Id: Ic154b438df2c811c845e7c2eaadf252985d419ad
Prefetch RX HW desc, SW desc and SKB in pipeline
fasion in the first loop of RX processing.
This has improved TPUT by 200Mbps and provided a
10% gain in CPU (single core)
PINE with other optimizations: 3960Mbps @ 100% core-3
PINE + pipeline prefetch: 4130Mbps @ 90% core-3
Change-Id: I47f351601b264eb3a2b50e4154229d55da738724
Define a new cdp interface to fetch peer delay stats.
Define a new cdp interface to fetch peer jitter stats.
These interface APIs will be used by upper layers to fetch delay and
jitter stats per peer for telemetry stats feature.
Change-Id: I96ee6a861fa2626e7e1fba3df7df9ec64ff7e946
CRs-Fixed: 3071493
In case of successful transmission If MPDU tx
is retried more than the threshold then
increment MPDU retry count by transmit_cnt / threshold
Change-Id: Idbc7e2d0579ff68e272132fe4ffe9f951c4aacf5
CRs-Fixed: 3058464
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
Add dp functionality to collect stats for sysfs buffer.
Add both host and fw stats.
Change-Id: I64f84804d36cccec9d701925d96cc7ee96943b7a
CRs-Fixed: 3035864
Dump flow pool stats even for low verbosity level as
part of periodic stats display.
Change-Id: Iea59d20b0a81cfd0bfdac65ad54a11fa33f30f2f
CRs-Fixed: 3031168
Conditionally compile scan radio special vap stats.
Also rename spcl_vap to scan_spcl_vap to better reflect
funtionality.
Change-Id: I7d7f636209f6aa12cca0a3e808d7ae1fac9f397d
CRs-Fixed: 3009837
This patch adds the function dp_update_msdu_to_list to dp_mon_ops
struct. This is needed for supporting tx capture module in NSS
offload.
Change-Id: Id36aa6d1442eed4112585807e8798fc28ccdc424