Currently only peer mac address is logged if
failed to find peer, there is no log for vdev id.
If caller has passed wrong vdev_id from current
error print one can not identify the issue.
So to fix the issue add vdev id to error log
to check if vdev_id was passed correctly.
CRs-Fixed: 3616476
Change-Id: I3c500784e744f37dd8a1a2a7b84c7b94baf13149
Add arch ops for dp_mlo_chip_id to avoid access
of dp_soc_be struct for LI platforms
Change-Id: Idc7612ef3c517aa62668fe15e51b5e5ec74bb253
CRs-Fixed: 3582795
peer find by mac function is getting used by
many components. so, Movng that to common path.
Change-Id: I390b86af73618661857ed80d478fe4f48bee9fe1
CRs-Fixed: 3563204
Delete and add ast entry during PTQM migration for current and new primary
peer respectively.
Change-Id: I4a640f84a5778aeff19057e027b3aae9e939487a
CRs-Fixed: 3536670
add multiple history array to keep track of mem allocation and
deallocation for qref table.
Change-Id: I9fa97fbe5a5c36509cbb5a458851a152200318a5
CRs-Fixed: 3475981
Add vdev stats support for DP MLO Unified
and Hybrid Mode.
Add new CDP API for getting vdev stats for
NON_MLD interface.
Add support to get vdev stats for specific
vdev which is a part of MLO.
Change-Id: I72c8b25958649d473e1b65cee21810cd86951187
CRs-Fixed: 3455607
As of today, dp_peer.c has the peer management and rx_tid
functionality(create/setup/remove) which is used by the REO HW.
WCN6450 does not have REO HW and dp_rx_tid functionality is not
required for WCN6450. Hence, separate out dp rx tid functionality
from dp_peer.c so that we can avoid compiling unnecessary code
for WCN6450.
Change-Id: I322823704f38ff72e485f050941be6b1254bad09
CRs-Fixed: 3383330
Add HMWDS rem-addr support to delete AST WDS mac entries in
Beryllium chipsets.
Change-Id: I5623bac02b326d1d668ad5e1fdcfc3a9f8cbbb9c
CRs-Fixed: 3397961
The kernel-doc script identified a large number of documentation
issues in dp/wifi3.0/dp_peer.[ch], so fix those issues. In addition,
there are a number of instances where public functions have their
implementation documented instead of having their interface
documented, so move that documentation.
Change-Id: I996764f93addfa270ef7aaedd2e23c71be287f77
CRs-Fixed: 3373168
Add history to record the config/control events
e.g. peer create/delete/unref-delete, vdev attach/detach
in datapath.
Change-Id: Ic3c8122fca9124e41931ec445946aec5e8863434
CRs-Fixed: 3371899
Add debug logs in the MLD peer create/delete path
to help debug any issues with MLD peer leak.
Change-Id: I63126d9b86f3179a88809836371fc765d340b6d8
CRs-Fixed: 3379148
Maping and unmaping of the MLO DP peer to the partner soc
will be initialized based on architecture.
dp_mlo_partner_chips_map
dp_mlo_partner_chips_unmap
Change-Id: I918f6d552acd9d64086abf4c38f913348e13c381
CRs-Fixed: 3267904
Add support to print AST entries of MLO peer.
MLO AST table is global across SOC and hence any print AST request
will print the MLO AST table
Change-Id: I07554606617f43a8806e1c7243ca69a0c8ce335e
CRs-Fixed: 3246520
Add changes to support flushing of MLO peers only.
This is required to support the mode-1 behavior of target
recovery feature, where we delete MLO peers and retain
legacy peers across SOCs which are not crashed.
CRs-Fixed: 3243549
Change-Id: I5ae326bfffd1267768c83fd7f60fa1343ef305fe
Currently, if mld and link peer has the same mac
address, the peer cannot distinguished with
just the mac address as the search argument.
Hence to support same mld/link peer mac address,
cdp_peer APIs that uses both link and mld peers,
are also given peer_type info. This helps
to perform the operations on the correct peer.
Change-Id: If646755facc8f9a4d9fed2f31c5cc6618fa9a952
CRs-Fixed: 3043428
In VoIP cases, no or minimal packet drop is expected during
roaming. Currently, data packets are dropped in host if they
are received after roam sync indication from firmware and before
peer map indication is received due to invalid peer.
This change allows rx UDP data packets during roaming before
peer map indication is received from FW if peer's auth_status
received in roam_sync_indication from FW is authorised.
Change-Id: Ic518b7cd0aef48a2b0f8c923a2e20838b07f3d1f
CRs-Fixed: 3168603
Define API to get the link peer_id using peer_id and lmac_id.
This is required in Rx monitor path for stats updation as Rx
monitor provides MLD peer id, whereas stats updation is done
for link peer.
Change-Id: Ib1c9e2729ccaea2e28272b7d175b3ef7fba9fd7a
CRs-Fixed: 3133003
Delay and jitter stats are placed in struct dp_txrx_peer.
Make changes accordingly for allocation, fetching and clearing
operations of these stats.
Change-Id: Ic9b9e48467741072806000f4d1b3aa8e5c65d508
CRs-Fixed: 3092123
Move the stats parameters from the dp_peer which are used
in per packet path to txrx_peer
Change-Id: Ieb68b6950740791b37bbd2bfdc4815c3d7bc4834
CRs-Fixed: 3095637
Move the parameters from the dp_peer which are used
in per packet path to txrx_peer and params related
to monitor path to monitor peer.
Initialize txrx_peer and monitor peers.
Change-Id: I0449c67c1cd47deb76bc89b5ddc64174f6694eb0
CRs-Fixed: 3095637
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
Add APIs to get txrx peer, tgt peer and primary link peer from peer
for both MLO enabled and disabled scenarios.
Change-Id: Ie48711972dd3eef35fdd7bf736e91bfce4cd41f3
CRs-Fixed: 3107160
Moving HTT parsing to common file dp_mon.c
Initialize function pointer to stats ind handler for BE
CRs-Fixed: 3071271
Change-Id: I08fb98f8dbed075c3b49baebca399771bfb5077c
DP peer changes required for multi-chip MLO.
This change includes
1) Adding MLO peer to global peer hash at ML context
2) Add ML peer to all partner chips id to objtable
Change-Id: I230a6c1b14484c587b190a9a318fe9ffb1caea11
Add the handler for processing the htt
peer map/unamp v3 and MLO peer map/unmap msgs.
Change-Id: Ie2ab0b76e7aee566ca3b9637b83fd7a14718ab01
CRs-Fixed: 3039326
