Add support for GET MLO Multicast API to check
if the vdev is primary multicast vdev.
Enhanced SET MLO Multicast API to reset primary
multicast flag for all partner vdevs.
Change-Id: Ic88949ce922bb1d0fd34349058d254de0d1f563c
CRs-Fixed: 3322523
Ideally in MLO, Rx buffers should be routed to error
rings of the SOC which owns the RX buffer or link desc
incase of any error or fragment
But in case of HW issue if the packets are routed to
partner soc. Handle gracefully instead of assert
Change-Id: Ia56188808dfd034e960e1c1345de8f760e4b05f1
CRs-Fixed: 3327959
In 256M profile dp_li_rx.c file is not getting compiled.
Initialize dp_rx_chain_msdus_li() only when HOST mode is supported.
Change-Id: I96f71b9ea7869f0ba9fec05424b0a8c6f378f2f4
CRs-Fixed: 3314081
When compact rx tlv feature is enabled fetch the
reo qdesc from the peer instead of rx pkt tlvs.
Change-Id: Idc9eec559b71ebb2dc39ea1d648a384ea0eb9559
CRs-Fixed: 3311270
Adding compact tlv support for QCN9224, As part of this change
Rx tlv size will reduce from 384 bytes to 128 bytes.
Change-Id: I3f42a781e42b2e696a5b25d9c5f333c8cc83b7fe
CRs-Fixed: 3274152
Add support for:-
1. PPE VP entry attach and detach.
2. Per VAP PRI2TID Support
3. Dump the PPE VP HW entries.
4. Add tx completion handling for ppeds descriptors
Change-Id: I2a6d0be5bb556663a39a24d17b703877f3b5ad00
CRs-Fixed: 3276981
Compilation is failing when Monitor support is disabled
Moved monitor related API and structure to monitor header files.
CRs-Fixed: 3257872
Change-Id: Ie1b3dc16b38c88bfd73fc89aaa395d4b57a61e5c
Add framework to use different RX hash values and ring masks
for ML and non-ML peers
Change-Id: I098cb50b8873eb137ce096011d01a5c21aaf854f
CRs-Fixed: 3269916
This is a new FAST TX API which avoids various checks.
This API will be called when SFE tags a pkt as fast_forwarded
and vap's fast_tx flag is set.
avoid additional re-checks in the wifi TX function
CRs-Fixed: 3218650
Change-Id: Iba17ede59652a1ff2af553f57de21dc58946298e
- Add support to compute HW Tx completion delay on WKK
- Define arch op to calculate delay
Change-Id: I82567cc781e90fe01dc5a0edfffacd4cde73f652
CRs-Fixed: 3220911
In case Multi chip MLO configure same hash key for
all SOCs in MLO. This change is needed to avoid
same flow traffic distributed to multiple REOs.
Change-Id: Ib6cde4ae32e58ef2d45c02d640c133458f5bfac5
CRs-Fixed: 3201978
Ageout flush does not happen for WBM2SW4 if there
is only one TX completion pending in FIFO and all the
other WBM release rings are not active. This is due to
an issue in HW and this prevents suspend to happen due
to pending tx completions.
Fix is to avoid using WBM2SW4 release ring and instead
reuse WBM2SW0.
Change-Id: I250d8c9d460895449939212ebdb7abd62edb0234
CRs-Fixed: 3124733
Add support to update tsf timestamp on driver entry and
exit in data packet. This helps debug latency issue in
XR usecases
Change-Id: I9c966c1b8cb09dc5eab6104fdad36c19a1d68045
CRs-Fixed: 3090108
In WIN BE chipsets, replace the REO tid
queue programming in FW via WMI with writing to a
Host managed table shared by HW and SW. REO HW will
pick the tid queue address from the table indexed by
peer id and tid number.
Change-Id: I8107ca5116425538329b11ae3519f02b32573bac
Enable the 4th Tx. completion ring to save CPU load
Initialization and interrupt handling for 4th completion ring
is done here.
Change-Id: I2db27218a3c3e14d719d012f03454a6a7aa647fe
Prefetch TX HW desc, SW desc and SKB in pipeline fashion in Tx.
completion path.
This improves the UDP DL CPU idle% by ~4.5%
Change-Id: I48096e996cd835321ce2681d3981fa94c7189f54
In the case of RAW mode, VAP parameters encap type, dscp_to_tid map id
and cipher are not updating in bank register.
Added a API to update vdev param.
Change-Id: I702bee563e7451f403fa32292bf20680cd66e213
CRs-Fixed: 3078687
Rx patch changes for multichip MLO
1. Create ini for rx ring mask for each chip
2. Configure hash based routing for each chip based
on lmac_peer_id_msb
3. Peer setup changes to configure lmac_peer_id_msb
to enable hash based routing
4. Rx Replenish changes to provide buffers back to owner
SOC of reo ring
Change-Id: Ibbe6e81f9e62d88d9bb289a082dd14b4362252c4
Changes needed for MLO soc attach to pass chip_id,
dp_ml_context from upper layer.
This change also takes care of assigning appropriate
RBM id for IDLE link descriptors based on chip_id.
Change-Id: I8f5f08c524d91942e6e458f048700b7bdd900107
For IPQ products, there is 1 refill ring which is of hardware type
and host replenishes the buffers onto this ring so that hardware can
use these buffers for Rx.
In IPA offload mode, the buffer replenishment model is different from
the one mentioned above. There are 3 refill rings, out of which,
2 are software refill rings (1 for host and 1 for IPA), and last ring
is hardware ring given to FW.
Ring given to IPA is to refill the buffers after processing the
regular Rx packets and ring given to host is to refill the buffers
after processing of exception packets. Since there are 2 entities to
refill the buffers, the hardware ring given to FW multiplexes these 2
software rings and provides the buffers to hardware.
Make changes to follow above replenishment model for SDX+Pine
integration.
Change-Id: I0d9e4ec811a3023a258e0a6b9ee22ccdffcebafa
CRs-Fixed: 3049633
Take care of the MLO peer bit indication to be
concatenated with peer_id to access the peer map
object.
Change-Id: Ia603a728101e83829a8906d1b847f42389e78ca6
CRs-Fixed: 3039326
This change includes below
1) Changes needed to increase Tx rings to 4
2) Use WBM2SW4 ring for rx error in QCN9224
3) memset srng at alloc to avoid populating RBM_id
in per packet path and enable implicit RBM
Change-Id: Icbd5ac2378273b8f3c6adc41c611e29551fff22f
wds in Beryllium is managed by hardware.
Make use of hardware managedwds and disable
the corresponding wds handling done in host
for Beryllium.
Change-Id: I39f23cb40c6c5f85ada8ce59c92ff2855bb18da3
The following configurations are changed
- Change numer of WBM2SWRELEASE rings from 7 to 8
- Use configurable RBM value when enqueuing packets for TX. This is needed
since WBM release ring numbers do not have an easy mapping to RBM values
for HMT1.0.
Change-Id: Idcf9e48e00b7039331fc1837bb1e900b12f19eb3
CRs-Fixed: 2984362
Move DP TX target specific functionality to dp/wifi3.0/be
and dp/wifi3.0/li folders. DP Functionality common to both lithium and
beryllium targets stays in dp/wifi3.0.
Change-Id: I3497284153e2ea30a9cb1faf05bd41422329b804
CRs-Fixed: 2891038
