Setting a lower load can make the regulator enter into LPM. Now the
lower load was set before the regulator disable, there's a risk here.
The regulator has been LPM, while it was not disable, if the cosumer
has a higher current needed than LPM at this time, that will lead OCP
on this regulator. The right operation for a regulator enable/disable
should be:
1. regulator_set_voltage(vreg, active_min_uV, active_max_uV) and
regulator_set_load(vreg, active_load_uA); in either order
2. regulator_enable()
3. regulator_disable()
4. regulator_set_voltage(vreg, inactive_min_uV, inactive_max_uV)
and regulator_set_load(vreg, inactive_load_uA); in either order
Change-Id: Ibe4f888a5675baf2691e479daa163d8867902e69
Signed-off-by: Zhao, Yuan <yzhao@codeaurora.org>
This change sets the regulator voltage to zero for all
those regulators which support voltage scaling before
disabling the regulator. Failing to do so causes the regulator
vote to set to the last min value specified in the previous
set voltage call.
Additionally modified the config regulator api and renamed to
get regulator because of the above change.
Change-Id: Ie4c4842db0c08a4d98926ed79503cf84e4d5762a
Signed-off-by: Abhijit Kulkarni <kabhijit@codeaurora.org>
Use usleep_range api instead of msleep in dsi enable path to
improve accuracy, which improves bootup time.
Change-Id: I5d00d666bfacddea58b824267eb0eb39b5b2641c
Signed-off-by: Vara Reddy <varar@codeaurora.org>
ELVDD/ELVSS has a dip during AMODE panel AOD exit hand-off.
According to PMIC team's suggestion, need to config the AB/IBB power
to REGULATOR_MODE_IDLE/REGULATOR_MODE_NORMAL to fix dips.
Change-Id: Ia5cbd4d698de262e02a660f670865c03dda1e04a
Signed-off-by: Wenjun Zhang <wjzhan@codeaurora.org>
Signed-off-by: Yuan Zhao <yzhao@codeaurora.org>
Adding debug, info and error prefix for log messages
in dsi files. To enable debug logs
run "echo 0x1 > /sys/module/drm/parameters/debug"
Change-Id: I438ac16954bd1d39450f8adeb7fb17f9ea6f8140
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change is a snapshot of dsi files taken of 4.14
as of commit 764f7c2 (Merge remote-tracking branch
'quic/dev/msm-4.14-display' into msm-4.14)
Change-Id: I8361a844c35a4450f7800964a8da2741676fd6c7
Signed-off-by: Satya Rama Aditya Pinapala <psraditya30@codeaurora.org>
This change brings msm display driver including sde,
dp, dsi, rotator, dsi pll and dp pll from base 4.19 kernel
project. It is first source code snapshot from base kernel project.
Change-Id: Iec864c064ce5ea04e170f24414c728684002f284
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
