replace all dev(pr)_err/info logs
that could potentially flood kernel logs with
ratelimit functions dev_err_ratelimited and
dev_info_ratelimited
Change-Id: I32dc6002dead1a07622978c4de63d541c01982fd
Signed-off-by: Shazmaan Ali <quic_shazmaan@quicinc.com>
Add PBR, CPS port types and port parameters for WSA
Update RX and TX port types to include full list of ports
Change-Id: I5b69ee777addebcf4167dccd4ce4ab0af31b754d
Signed-off-by: Matthew Rice <quic_mrice@quicinc.com>
during devm_snd_soc_register_card(), the name_prefix can be set
if "sound-name-prefix" is provided in the DT nodes.
The original approach to set prefix would possibly cause ASoC
component probe failed if prefix has not set before probe is called
Change-Id: Ie78d042cda24b7d1d926223d476786e13d965ac7
Signed-off-by: Junkai Cai <quic_junkai@quicinc.com>
Add null check for swr dmic component and swr_dmic_priv
before use.
Add array bounds check for slave port index before
accessing the array.
Change-Id: I6f1976e98e41e513a9a9db83d4e804a5cb1fe79b
Signed-off-by: Junkai Cai <junkai@codeaurora.org>
Add range check for ucontrol value to avoid array
overflow.
Change-Id: I7b699519bec6f605e5ca5ece8f67badbefc7a094
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Update swr_tx slave port config to use slave provided port params
and remove slave port static tables.
Change-Id: Icfedf1229a88432e80c2294e13f2ccc3949417c5
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add array bounds check for index before accessing
tx_master_port_map.
Change-Id: I52a8dbdaf40974a45e86b3dca4caa27d88a7b864
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
When same swr dmic is first enabled as HIFI, secondly as LP
and closed HIFI, it would disable LP port by mistake. Update
the logic to select correct port for swr-dmic.
Change-Id: I5d4d1461d8cd7db7bc7f37fc91ee1c9324413980
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Check if component prefix is set before use.
Add component prefix for dai widgets before calling
ignore suspend.
Change-Id: Ifa0c727bf46af661cd19b6018bfc25af9a7e3753
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add notification from wcd938x to sound wire dmics
during SSR. Remove device down from dev ops to avoid
deadlock scenarios.
Change-Id: Ifdcbebb748c10deb89ad51ada1a8ce1cf33f2462
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Retry for soundwire slave enumeration during bootup before
EPROBE_DEFER to avoid soundcard enumeration failures.
Change-Id: I083ec76fc84a2b367f93a2dc166a1419a75ff8b4
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add ignore suspend for dapm widgets to avoid waking up the
system during power collapse.
Change-Id: I4eec9785f2e722d1fbcbf26c2635af9825b30115
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
When SSR/PDR occurs during record usecase, swr dmic's need
to be shutdown before WCD938x is set to reset low, since swr dmic's
depend on WCD938x for mic bias.
The swr dmic's are shutdown from sound wire master
control during SSR/PDR via driver ops, before WCD938x is shutdown.
Change-Id: I987833b7f44692ff4c91954d65623a17f6b0abdc
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Add NULL check for swr dmic component pointer before
using it.
CRs-Fixed: 2666974
Change-Id: I25c14c17f820ce3be7e1c7d892a2c0e29ac2b9fc
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Remove soundwire driver ops to avoid deadlock during audio
sub system restart.
Handle SWR DMICs enable/disable during usecase.
CRs-Fixed: 2648763
Change-Id: I73cc95ae389da9dee742544f29ceca9d9b7ac9c6
Update audio capture sequence to avoid multiple bank switches
during multi mic usecase that helps in reducing the latency
for path setup.
Change-Id: Idac8bca97b3503cdbf82bb482e8a297a1fd20893
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Since clock stop mode is supported, disable mic bias supply
after a successful dmic probe.
Change-Id: I1a545969601367cc22844d1ab8467fb3722d882f
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Remove sound wire dmic device from master device list only during
critical error and not for probe defer.
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Soundwire DMICs provide the same quality as regular DMICs but
the interface is soundwire. This reduces the number of pins
on the MSM. Enable soundwire DMICs on lahaina.
Change-Id: I4245369fdcb29cf96f315ebc1d2e9a83a0fbc14b
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Supply for swr dmic is from wcd mic bias.
Enable the power supply by calling corresponding
interfaces from cdc supply driver.
Change-Id: I9db6a4799ebfdd974d9e12c47053d8d73da2b883
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add initial changes for supporting swr dmic
where each codec can support single mic recording
over soundwire port.
Change-Id: I0319bfb5c850d48b563f46d5dd77f21d4a83f029
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
